This RCF-to-g calculator converts relative centrifugal force (RCF, expressed as ×g) and rotor radius into rotational speed in revolutions per minute (rpm), or converts rpm and radius into RCF. Enter the known force or speed and the radius in centimetres; the calculator returns the corresponding value using the standard centrifuge equation.
Formula
RCF and rpm are related by RCF = 1.118 × 10−5 × r × rpm², where RCF is dimensionless relative centrifugal force expressed as a multiple of standard gravity, r is the effective rotor radius in centimetres, and rpm is revolutions per minute. Rearranging gives rpm = √[RCF / (1.118 × 10−5 × r)].
The first calculator result is the rpm corresponding to the entered RCF and radius. The second is the RCF corresponding to the entered rpm and radius. The coefficient incorporates the unit conversions and standard gravity used by the conventional centrifuge equation. Use radius in centimetres—not millimetres or metres—when applying this coefficient.
Worked Example
Using the defaults, the known values are RCF = 1000 ×g and radius r = 10 cm. Calculate the speed:
rpm = √[1000 / (1.118 × 10−5 × 10)]
rpm = √[1000 / 0.0001118]
rpm = √8944543.828… ≈ 2990.7 rpm
Rounded to the calculator’s 0 decimal places: 2991 rpm.
For the second result, use the default speed of 3000 rpm and the same 10 cm radius:
RCF = 1.118 × 10−5 × 10 × 3000²
RCF = 1.118 × 10−4 × 9000000 = 1006.2 ×g
Rounded to 0 decimal places: 1006 ×g.
Assumptions
- The radius is the distance from the rotor’s axis of rotation to the point in the sample being considered, measured in centimetres.
- The conventional coefficient 1.118 × 10−5 and standard gravity are used.
- Speed is expressed in rpm and force as a multiple of gravity, not as an acceleration in m/s².
- The calculations convert between speed and force only; they do not account for sample properties, rotor geometry limits, or instrument settings.
What RCF and g Mean
RCF means relative centrifugal force. It describes the acceleration experienced by material in a rotating centrifuge relative to standard gravitational acceleration. A setting of 1000 ×g means an acceleration about 1000 times standard gravity at the radius used for the calculation. It does not mean the sample’s mass has changed or that the centrifuge is spinning at 1000 rpm.
“g” in an RCF value refers to gravitational acceleration, not grams. RCF is commonly written as ×g to make that distinction clear. RPM, by contrast, is rotational speed: the number of complete revolutions per minute. The two quantities are related, but they are not interchangeable without knowing the rotor radius.
How to Choose the Right Radius
A rotor does not have one radius for every position in a tube. The axis-to-sample distance changes from the tube’s top to its bottom, so the calculated RCF changes along the sample. Centrifuge specifications and protocols may state RCF at the maximum radius, at the sample’s midpoint, or at another defined location. Match the radius convention to the one used by the protocol.
- Maximum radius (rmax): distance from the axis to the bottom or outermost sample position. This gives the greatest RCF in the sample.
- Minimum radius (rmin): distance to the innermost sample position, often toward the tube’s top. It gives a lower RCF.
- Average radius: a representative distance sometimes used for comparisons, but only when the method or rotor documentation specifies it.
Do not use the tube’s length, its distance from the rotor’s centre by visual estimate, or the rotor’s outside diameter as a substitute. Consult the rotor documentation or the method for the relevant radius. If a protocol specifies RCF rather than rpm, entering the correct radius lets you estimate the required speed; if the machine directly accepts RCF, use its documented setting and follow its instructions.
Why RCF Is Often More Useful Than RPM
RPM alone does not tell you the force applied to a sample. At the same rpm, a sample farther from the axis experiences a greater RCF because the acceleration rises with radius. This is why two rotors running at 3000 rpm can produce different forces. Reporting RCF makes a centrifugation condition more transferable between rotors, provided the radius convention and equipment limits are also clear.
For example, the calculator’s defaults give about 1006 ×g at 3000 rpm with a 10 cm radius. At a 20 cm radius, the same speed would give about 2012 ×g: doubling radius doubles RCF when rpm is unchanged. Conversely, to achieve the same RCF at a larger radius, the required rpm is lower. The square-root relationship means doubling the target RCF does not require doubling rpm; at a fixed radius it requires multiplying rpm by √2.
Common Errors and Limits
- Mixing units: this calculator expects centimetres. Convert millimetres to centimetres by dividing by 10, and metres to centimetres by multiplying by 100.
- Confusing RCF with rpm: a value such as 2000 ×g is not 2000 rpm. Use the equation and the relevant rotor radius to convert.
- Using the wrong rotor radius: an incorrect radius produces an incorrect conversion, even if the arithmetic is right. Radius conventions can explain differences between reported settings.
- Rounding too early: keep unrounded values through the calculation and round only the final setting to the precision supported by the centrifuge and protocol.
- Ignoring equipment limits: a mathematically calculated speed is not proof that a rotor, tube, adapter, or instrument can safely operate at that speed or force.
The equation is a conversion, not a centrifugation protocol. It does not determine run time, temperature, braking, sample balance, or the force needed to achieve a particular separation. Rotors also have maximum allowable speeds and may require specific compatible components. Never exceed the limits stated for the equipment and consumables. For bench work, follow your lab method, the safety data sheet (SDS) and your supervisor.
Frequently Asked Questions
How do I convert RCF to rpm?
Use rpm = √[RCF / (1.118 × 10−5 × r)], with radius r in centimetres. For 1000 ×g at 10 cm, the result is about 2991 rpm.
How do I convert rpm to RCF?
Use RCF = 1.118 × 10−5 × r × rpm². At 3000 rpm and a 10 cm radius, the result is about 1006 ×g.
Does 1000 ×g mean 1000 rpm?
No. ×g is relative acceleration, while rpm is rotational speed. Converting one to the other requires the effective rotor radius.
Which radius should I use?
Use the radius specified by the protocol or equipment documentation, such as rmax or the sample’s average radius. The resulting RCF depends on the point in the sample being considered.
Why does the same rpm give different RCF values?
RCF is proportional to radius at a fixed rpm. Different rotor geometries place samples at different distances from the axis, so the same rotational speed can produce different forces.
Related
Formula used
in rcf | Relative centrifugal force | ×g | 1000 | 0 in rad | Rotor radius | cm | 10 | 0 in rpm | Rotational speed | rpm | 3000 | 0 out speed | Rotational speed from RCF | rpm | sqrt(rcf / (1.118 * 10^-5 * rad)) | 0 out force | Relative centrifugal force | ×g | 1.118 * 10^-5 * rad * rpm^2 | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Isotope Percent Abundance Calculator and How to Use It75.91 %
- Percentage Abundance Calculator and How to Find It
- Isotope Fractional Abundance Calculator and Formula0.2409 fraction
- Percent Abundance Formula: Calculate Isotope Percentages25.00 %
- Isotope Percent Abundance Calculator and How to Use It50.00 %
- Isotope Percent Abundance Calculator and How-To Guide75.91 %