molecalculator

Moles & Molar Mass

Relative Atomic Mass of Glucose: C6H12O6

Calculator No. 01-9891 · Updated · Formula and assumptions shown below

Molarity 0.1110 mol/L
Concentration in millimolar
111.01 mM
= Molarity × 1000
Mass of glucose
5 g
Set in the form below
Molar mass of glucose
180.156 g/mol
Set in the form below
You enter
Mass of glucose (g), Molar mass of glucose (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The relative atomic mass of glucose (C6H12O6) is 180.156 (to three decimal places), based on the IUPAC standard atomic weights. This value is the sum of the relative atomic masses of its constituent atoms: 6 carbon, 12 hydrogen, and 6 oxygen atoms.

Formula

The relative atomic mass (also called relative molecular mass or molar mass for a compound) is calculated by summing the relative atomic masses of each element multiplied by its subscript in the chemical formula:

M(C6H12O6) = 6 × Ar(C) + 12 × Ar(H) + 6 × Ar(O)

Where:

  • Ar(C) = 12.011 (relative atomic mass of carbon)
  • Ar(H) = 1.008 (relative atomic mass of hydrogen)
  • Ar(O) = 15.999 (relative atomic mass of oxygen)

The result is expressed in atomic mass units (u) or equivalently in grams per mole (g/mol) when used as molar mass. The calculator above uses this formula to convert a mass of glucose into moles and then into molarity for a given volume.

Worked Example

Using the default values from the calculator: 5.00 g of glucose dissolved to a final volume of 250 mL.

Step 1: Calculate the molar mass.

M = 6 × 12.011 + 12 × 1.008 + 6 × 15.999 = 72.066 + 12.096 + 95.994 = 180.156 g/mol

Step 2: Convert mass to moles.

n = m / M = 5.00 g / 180.156 g/mol = 0.027754 mol (rounded to 5 significant figures)

Step 3: Convert volume to liters.

V = 250 mL = 0.250 L

Step 4: Calculate molarity.

c = n / V = 0.027754 mol / 0.250 L = 0.1110 mol/L (4 significant figures)

The calculator shows 0.1110 mol/L, matching this result.

Assumptions

  • The atomic weights used are the IUPAC standard abridged values (C = 12.011, H = 1.008, O = 15.999).
  • The glucose is pure and anhydrous (no water of crystallization).
  • The solution is dilute enough that volume changes on dissolution are negligible; the final volume is used, not the solvent volume.
  • Temperature and pressure do not affect molarity calculations (they affect density but not the mole count).

Why the Relative Atomic Mass Matters

The relative atomic mass of glucose is the bridge between the macroscopic world (grams on a balance) and the microscopic world (molecules in a reaction). In the lab, you rarely count molecules directly; you weigh them. Knowing that one mole of glucose weighs 180.156 g lets you prepare solutions of exact concentration, calculate yields in fermentation or biochemical reactions, and determine how much glucose is present in a sample.

For example, if you need 0.5 moles of glucose for a yeast fermentation experiment, you would weigh out 0.5 × 180.156 = 90.078 g. Similarly, in clinical chemistry, blood glucose levels are often reported in mmol/L; converting from mg/dL requires dividing by the molar mass (180.156 g/mol).

How to Calculate It Yourself

If you don’t have the value memorized, you can always derive it:

  1. Write the molecular formula: C6H12O6.
  2. Look up the standard atomic weights: C = 12.011, H = 1.008, O = 15.999.
  3. Multiply each by its subscript: 6×12.011 = 72.066; 12×1.008 = 12.096; 6×15.999 = 95.994.
  4. Add them: 72.066 + 12.096 + 95.994 = 180.156.

This method works for any compound. For hydrated salts, you must include the water molecules in the formula (e.g., glucose monohydrate would add 18.015 g/mol).

Common Mistakes and Misconceptions

  • Using the wrong atomic weight: Some older tables use C = 12.01, H = 1.01, O = 16.00, giving 180.18. The difference is small but can matter in precise work.
  • Forgetting the subscript: Glucose has 6 carbons, 12 hydrogens, and 6 oxygens. A common error is using 12 carbons (as in sucrose) or forgetting the hydrogens altogether.
  • Confusing relative atomic mass with mass number: Relative atomic mass is a weighted average of isotopes, not the mass of a specific isotope. For carbon, it’s 12.011, not exactly 12.
  • Mixing up molar mass and molecular weight: They are numerically identical but units differ: molar mass is g/mol, molecular weight is dimensionless (or u).

Frequently Asked Questions

What is the difference between relative atomic mass and molar mass?

Relative atomic mass (Ar) is a dimensionless quantity for a single atom; molar mass (M) is the mass of one mole of a substance in g/mol. For a compound like glucose, the relative molecular mass (Mr) is the sum of the atomic masses, and the molar mass is numerically the same but expressed in g/mol.

Is the relative atomic mass of glucose always 180.156?

Yes, if you use the IUPAC standard atomic weights. Some textbooks round to 180.16 or 180.2 for simplicity. The exact value depends on the isotopic composition of the sample, but for normal terrestrial samples, 180.156 is accepted.

How do I convert mg/dL glucose to mmol/L?

Divide the value in mg/dL by 18 (because 180.156 g/mol ≈ 18 mg/mmol). For example, 90 mg/dL ÷ 18 = 5.0 mmol/L. This is a common clinical conversion.

Does glucose have the same relative atomic mass as fructose?

Yes, glucose and fructose are isomers with the same molecular formula C6H12O6, so they have the same molar mass (180.156 g/mol). Their structural differences do not affect the atomic count.

Why is the relative atomic mass of carbon not exactly 12?

Because natural carbon is a mixture of isotopes: about 98.9% carbon-12 and 1.1% carbon-13, plus traces of carbon-14. The weighted average is 12.011, not 12.000.

Can I use the molar mass to find the number of glucose molecules in a sample?

Yes. Multiply the number of moles by Avogadro’s number (6.022 × 1023 molecules/mol). For 1.00 g of glucose, that’s (1.00 / 180.156) × 6.022 × 1023 ≈ 3.34 × 1021 molecules.

Practical Applications in the Lab

In biochemistry and molecular biology, glucose solutions are common. The calculator above helps you prepare a specific molarity. For example, to make 500 mL of 0.5 M glucose, you would need:

m = M × V × Mr = 0.5 mol/L × 0.500 L × 180.156 g/mol = 45.039 g

Dissolve that in about 400 mL of water, then adjust to a final volume of 500 mL. Always use the final volume, not the solvent volume, because the solute adds volume.

For cell culture media, glucose is often added as a sterile-filtered stock solution (e.g., 20% w/v). A 20% (w/v) solution means 20 g per 100 mL, which is 20 g / 0.1 L = 200 g/L. The molarity is 200 / 180.156 = 1.11 M. Knowing this helps when diluting to working concentrations.

Limitations of the Calculation

The relative atomic mass is an average; it doesn’t account for isotopic variations in non-terrestrial samples. For most lab work, this is irrelevant, but in mass spectrometry or nuclear chemistry, you might need the exact isotopic mass. Also, the molar mass assumes the compound is pure; hydrates or impurities will change the effective mass. Finally, molarity calculations assume the solution volume is the final volume, not the solvent volume – a common source of error.

When preparing solutions, always follow your lab method, the safety data sheet (SDS) and your supervisor. Use calibrated glassware and a balance that reads to the appropriate precision.

Related

Formula used
in m | Mass of glucose | g | 5.00 | 0
in mm | Molar mass of glucose | g/mol | 180.156 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →