molecalculator

Moles & Molar Mass

Relative Formula Mass Mr of Glucose C6H12O6

Calculator No. 01-10209 · Updated · Formula and assumptions shown below

Molarity 0.0649 mol/L
Concentration in millimolar
64.88 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
180.156 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The relative formula mass (Mr) of glucose (C6H12O6) is 180.156, usually rounded to 180.16. This value is the sum of the relative atomic masses of all atoms in one molecule: 6 carbon, 12 hydrogen, and 6 oxygen atoms.

Formula

The relative formula mass is calculated by adding the relative atomic masses (Ar) of each element multiplied by its subscript in the molecular formula:

Mr(C6H12O6) = (6 × Ar(C)) + (12 × Ar(H)) + (6 × Ar(O))

Using IUPAC standard atomic weights:

  • Ar(C) = 12.011
  • Ar(H) = 1.008
  • Ar(O) = 15.999

So Mr = (6 × 12.011) + (12 × 1.008) + (6 × 15.999) = 72.066 + 12.096 + 95.994 = 180.156 g/mol. The unit is grams per mole (g/mol) when used as molar mass, though relative formula mass itself is dimensionless.

Worked Example

Using the calculator defaults: you want to prepare 250 mL of a glucose solution with a known mass of 2.922 g. The molar mass is 180.156 g/mol.

Step 1: Convert volume to liters: 250 mL ÷ 1000 = 0.250 L

Step 2: Calculate moles of glucose: moles = mass ÷ molar mass = 2.922 g ÷ 180.156 g/mol = 0.01622 mol

Step 3: Calculate molarity: concentration = moles ÷ volume = 0.01622 mol ÷ 0.250 L = 0.06488 mol/L

Rounded to 4 decimal places, the molarity is 0.0649 mol/L. The calculator shows 0.0649 mol/L, and in millimolar: 0.0649 × 1000 = 64.88 mM.

Assumptions

  • The solute is pure, anhydrous glucose (dextrose) with formula C6H12O6.
  • The solution is dilute enough that volume additivity holds; final volume is used, not solvent volume.
  • Temperature is 25 °C for the molarity definition, though molarity itself is temperature-independent in this simple calculation.
  • No hydration water is present (glucose monohydrate would have a different molar mass).

Why the Molar Mass Matters

The relative formula mass of glucose is a fundamental constant used in countless lab calculations. It converts between mass and moles, enabling preparation of solutions with exact concentrations. For example, a 1 M glucose solution requires 180.156 g of glucose dissolved in enough water to make 1 L of solution. In biochemistry, glucose molarity is used to prepare cell culture media, to calculate osmotic pressure, and to determine the concentration of reducing sugars in assays. In clinical chemistry, blood glucose is often reported in mg/dL or mmol/L; converting between these requires the molar mass (180.156 g/mol). For instance, 90 mg/dL = 0.9 g/L ÷ 180.156 g/mol = 0.004996 mol/L = 5.00 mmol/L.

How to Use the Calculator

Enter any two of the three quantities (mass, molar mass, volume) to find the third. The calculator above is set to compute molarity from mass and volume, but you can adjust the inputs. For example:

  1. To find how many grams of glucose are needed for 500 mL of 0.5 M solution: moles = 0.5 × 0.5 = 0.25 mol; mass = 0.25 × 180.156 = 45.039 g.
  2. To find the volume needed to dissolve 10 g of glucose to make 0.2 M: volume = mass ÷ (molarity × molar mass) = 10 ÷ (0.2 × 180.156) = 0.2775 L = 277.5 mL.
  3. To convert a mass concentration (e.g., 5 g/L) to molarity: 5 ÷ 180.156 = 0.02775 mol/L.

Common Mistakes and Misconceptions

  • Using the wrong atomic weights: Some textbooks round to C=12, H=1, O=16, giving 180. That is acceptable for rough work but introduces ~0.1% error. For precise lab work, use 12.011, 1.008, 15.999.
  • Confusing relative formula mass with molecular mass: They are numerically identical for glucose, but “relative formula mass” is often used for ionic compounds. For glucose, it is a covalent molecule, so “relative molecular mass” (Mr) is also correct.
  • Forgetting the subscript 6: A common error is using C6H12O6 as 6×12 + 12×1 + 6×16 = 180, but if you accidentally use C6H6O6 (which is not glucose), you get 126. Always double-check the formula.
  • Unit mix-ups: Molar mass is g/mol, not g. When converting mg/dL to mmol/L, the conversion factor is 10 (since 1 dL = 0.1 L) and then divide by molar mass: mg/dL × 10 ÷ 180.156 = mmol/L.
  • Rounding too early: If you round intermediate steps, final answers can drift. Keep at least 4 significant figures until the end.

Limits of the Molar Mass Value

The molar mass of 180.156 g/mol is exact for the most common isotope composition (carbon-12, hydrogen-1, oxygen-16). However, natural glucose contains small amounts of heavier isotopes (e.g., carbon-13, oxygen-18), so the average molar mass of a real sample may be slightly higher. The IUPAC standard atomic weights already account for natural isotope abundance, so 180.156 is the correct average. For most laboratory purposes, this value is accurate enough. Also note that glucose can exist as a monohydrate (C6H12O6·H2O) with molar mass 198.17 g/mol, so always check the label of your reagent.

Frequently Asked Questions

Is the relative formula mass of glucose the same as its molar mass?

Yes, numerically they are identical. Relative formula mass (Mr) is a dimensionless ratio, while molar mass has units of g/mol. For glucose, Mr = 180.156, and molar mass = 180.156 g/mol.

Why is glucose’s Mr not a whole number?

Because the atomic weights of carbon, hydrogen, and oxygen are averages of natural isotopes. Carbon is mostly carbon-12 but includes ~1.1% carbon-13, which raises the average to 12.011. These fractional atomic weights lead to a fractional Mr.

How do I convert glucose concentration from mg/dL to mmol/L?

Multiply the value in mg/dL by 10 to get mg/L, then divide by the molar mass (180.156 g/mol). For example, 90 mg/dL → 900 mg/L → 0.9 g/L → 0.9 ÷ 180.156 = 0.004996 mol/L = 4.996 mmol/L, typically rounded to 5.0 mmol/L.

What is the difference between glucose and dextrose?

Dextrose is the common name for D-glucose, the naturally occurring form. Chemically it is the same compound, C6H12O6, so the Mr is identical. The term “dextrose” is often used in medical and food contexts, but the formula and molar mass are the same.

Can I use 180 instead of 180.156 for quick calculations?

Yes, for rough estimates or when the precision of the final answer is not critical. The error is about 0.09%, which is negligible for many purposes. However, for precise analytical work, use the exact value.

Does the Mr of glucose change with temperature or pressure?

No. The relative formula mass is a fixed property of the molecule. It does not depend on physical conditions. What changes is the density or volume of a solution, not the mass of the molecule itself.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 180.156 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →