molecalculator

Moles & Molar Mass

Relative Mass of Glucose: Formula & Values

Calculator No. 01-9893 · Updated · Formula and assumptions shown below

Molarity 0.0649 mol/L
Concentration in millimolar
64.88 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
180.156 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The relative mass of glucose (C6H12O6) is 180.156 g/mol for the molar mass, and its relative molecular mass (Mr) is 180.156 (dimensionless). This value is the sum of the atomic weights of 6 carbon, 12 hydrogen, and 6 oxygen atoms, using IUPAC standard atomic weights.

Formula

The relative molecular mass (Mr) of glucose is calculated by summing the relative atomic masses (Ar) of each element in the formula:

Mr(C6H12O6) = 6×Ar(C) + 12×Ar(H) + 6×Ar(O)

  • Ar(C) = 12.011 (carbon)
  • Ar(H) = 1.008 (hydrogen)
  • Ar(O) = 15.999 (oxygen)

Plugging in the values: 6×12.011 + 12×1.008 + 6×15.999 = 72.066 + 12.096 + 95.994 = 180.156. This is the molar mass in g/mol; the relative molecular mass is the same number without units.

Worked Example

Using the calculator defaults: you dissolve 2.922 g of glucose (molar mass 180.156 g/mol) in enough water to make 250.0 mL of solution. What is the molarity?

Step 1: Convert volume to liters: 250 mL = 250 / 1000 = 0.250 L.

Step 2: Calculate moles of glucose: 2.922 g ÷ 180.156 g/mol = 0.01622 mol.

Step 3: Molarity = moles ÷ volume = 0.01622 mol ÷ 0.250 L = 0.06488 mol/L.

The calculator gives 0.0649 mol/L (rounded to 4 decimals), matching the step-by-step result. The millimolar concentration is 64.88 mM.

Assumptions

  • The glucose is anhydrous (no water of crystallization).
  • The solution is at room temperature, and the density change from adding solute is negligible.
  • Molarity is based on final solution volume, not the volume of solvent added.
  • Atomic weights are IUPAC abridged standard values; variations of ±0.001 g/mol do not affect practical work.

When to Use This Value

The relative mass of glucose is essential for preparing solutions for cell culture, fermentation studies, enzymatic assays, and clinical glucose tolerance tests (though clinical work requires validated kits, not this arithmetic alone). For example, to make 1 liter of a 1 M glucose solution, you would weigh out 180.156 g of glucose and dissolve to a final volume of 1 L. In biochemistry, glucose molarity is often needed to calculate osmotic pressure or to convert between mass/volume percent and molar concentration.

For typical lab use, the molar mass is often rounded to 180.16 g/mol or even 180 g/mol. The difference is less than 0.1%, so it rarely matters for buffer preparation. However, for precise analytical work (e.g., preparing a calibration standard for HPLC), use the full 180.156 g/mol.

Common Mistakes and Misconceptions

  • Confusing relative molecular mass with molar mass: They are numerically identical but the former is dimensionless while the latter has units of g/mol.
  • Using the mass of glucose monohydrate: Glucose monohydrate (C6H12O6·H2O) has a molar mass of 198.17 g/mol. If you use anhydrous glucose mass but weigh the monohydrate, your solution will be about 10% too dilute.
  • Forgetting to account for the final volume: Adding 180 g of glucose to 1 L of water gives a final volume greater than 1 L, so the molarity is less than 1 M. Always dissolve and then bring up to the final volume.
  • Rounding atomic weights inconsistently: Using C=12, H=1, O=16 gives 180.0, which is fine for rough work but not for high-precision solutions.

How to Measure Relative Mass Experimentally

In the lab, you don’t usually measure the relative mass of glucose directly; you look it up. But if you wanted to determine it experimentally, you could use freezing point depression or osmotic pressure measurements. For a known mass of glucose dissolved in a known mass of solvent, the observed colligative property (e.g., ΔTf = Kf × m) allows you to calculate the molality, then the molar mass. For glucose, the experimental value will be close to 180 g/mol, confirming the molecular formula. This is a classic undergraduate physical chemistry experiment.

The theoretical value comes from summing atomic weights, which are based on isotopic abundance. Carbon has isotopes C-12 and C-13, so the average atomic weight is 12.011, not exactly 12. The same applies to hydrogen (1.008) and oxygen (15.999).

Related Calculations

Once you know the molar mass, you can compute:

  • Number of molecules: 1 mole contains 6.022 × 1023 molecules. So 2.922 g contains (2.922 / 180.156) × 6.022 × 1023 ≈ 9.77 × 1021 molecules.
  • Mass percent: In glucose, carbon contributes 72.066 / 180.156 = 40.0% by mass, hydrogen 6.7%, oxygen 53.3%.
  • Osmotic pressure: π = iMRT, where i = 1 for glucose (non-electrolyte), M is molarity, R = 0.0820574 L·atm/(mol·K), T in Kelvin.

Safety and Handling

Glucose is generally non-hazardous, but as with any chemical, avoid inhaling dust and wash hands after handling. When preparing solutions, follow your lab method and the safety data sheet (SDS) for the specific grade you use. For clinical or diagnostic applications, use validated commercial kits and follow the manufacturer’s instructions; the arithmetic here is for educational and research planning only.

Frequently Asked Questions

Is the relative mass of glucose 180 or 180.16? Both are used. The IUPAC standard atomic weights give 180.156 g/mol. Rounding to 180.16 is common for lab work, and 180 is acceptable for rough calculations. The difference is less than 0.1%.

What is the difference between relative molecular mass and molar mass? Relative molecular mass (Mr) is a dimensionless ratio of the mass of a molecule to 1/12 of the mass of carbon-12. Molar mass has units of g/mol and is numerically equal to Mr for a pure compound. For glucose, both are 180.156.

How many moles are in 1 gram of glucose? Divide 1 g by 180.156 g/mol = 0.005551 mol. This is about 5.55 millimoles.

Why does glucose have a higher relative mass than water? Water (H2O) has a molar mass of 18.015 g/mol. Glucose has six carbon atoms, twelve hydrogens, and six oxygens, so it is exactly 10 times heavier (180.156 vs 18.015). This is because glucose is a sugar with many atoms.

Does the relative mass change if glucose is in solution? No. The relative molecular mass is an intrinsic property of the molecule. In solution, the glucose molecules remain the same; only the concentration changes. The molar mass is always 180.156 g/mol regardless of how much is dissolved.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 180.156 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →