Salt itself does not have a fixed pH value—it depends entirely on the acid and base that formed it. Table salt (sodium chloride) dissolves to a neutral pH of about 7, but other salts can make solutions acidic, basic, or neutral depending on how their ions react with water. This page explains how to predict a salt’s pH and includes a calculator for the pH of a salt solution from its concentration and acid/base strength.
Formula
For a salt formed from a weak acid and a weak base, the pH of its aqueous solution is approximately:
pH = -log10(√(Ka × Kb))
where:
- Ka = acid dissociation constant of the conjugate acid (unitless, often written without units)
- Kb = base dissociation constant of the conjugate base (unitless)
- √(Ka × Kb) = hydrogen ion concentration [H+] in mol/L
This formula applies when the salt’s cation and anion both hydrolyze (react with water) to a similar extent, which is the case for salts of weak acids and weak bases. For salts of a strong acid and strong base (like NaCl), both Ka and Kb are effectively zero and the pH is 7. For salts of a weak acid and strong base (like sodium acetate), the pH is determined by the Kb of the conjugate base, and for salts of a strong acid and weak base (like ammonium chloride), the pH is determined by the Ka of the conjugate acid.
Worked Example
Using the default values: salt concentration = 0.10 mol/L, Ka = 1.8 × 10−5 (acetic acid), Kb = 1.8 × 10−5 (ammonia). This corresponds to ammonium acetate, a salt of a weak acid and weak base.
Step 1: Multiply Ka and Kb:
1.8 × 10−5 × 1.8 × 10−5 = 3.24 × 10−10
Step 2: Take the square root:
√(3.24 × 10−10) = 1.80 × 10−5 mol/L (this is [H+])
Step 3: Take the negative logarithm:
pH = -log10(1.80 × 10−5) ≈ 4.74
The calculator shows pH = 4.74, matching this result.
Assumptions
- The salt fully dissociates in water.
- The solution is dilute (concentration below about 0.1 mol/L), so activity coefficients are close to 1.
- Temperature is 25 °C; pH changes with temperature because Kw changes.
- For salts of weak acid + weak base, the approximation holds when the acid and base strengths are comparable; otherwise a more complex equation is needed.
- The formula ignores the contribution of water autoionization, which matters only for very dilute solutions (below ~10−6 mol/L).
Why Table Salt Is Neutral
Sodium chloride (NaCl) comes from hydrochloric acid (strong acid) and sodium hydroxide (strong base). When dissolved, Na+ and Cl− do not react with water to any significant extent. Na+ is the conjugate acid of a strong base (NaOH), so it has no tendency to donate protons; Cl− is the conjugate base of a strong acid (HCl), so it has no tendency to accept protons. The solution simply contains hydrated ions and water, and the pH stays at 7 (at 25 °C).
This is why a pinch of table salt in drinking water does not change its pH. However, not all salts behave this way. For example:
- Sodium acetate (from acetic acid + NaOH) makes a basic solution (pH > 7) because acetate ions accept protons from water, releasing OH−.
- Ammonium chloride (from HCl + ammonia) makes an acidic solution (pH < 7) because ammonium ions donate protons to water, releasing H+.
- Ammonium acetate (from acetic acid + ammonia) can be nearly neutral if the acid and base are equally weak, as shown in the example above.
How to Predict a Salt’s pH
To predict whether a salt is acidic, basic, or neutral, identify the acid and base that formed it:
- Break the salt into its cation (positive ion) and anion (negative ion).
- Determine the acid that produced the anion and the base that produced the cation.
- If the anion comes from a weak acid, it will act as a base (raising pH). If it comes from a strong acid, it is neutral.
- If the cation comes from a weak base, it will act as an acid (lowering pH). If it comes from a strong base, it is neutral.
- Combine the effects: strong acid + strong base → neutral; weak acid + strong base → basic; strong acid + weak base → acidic; weak acid + weak base → depends on relative strengths.
For a weak acid + weak base salt, use the formula pH = -log(√(Ka × Kb)). If Ka > Kb, the solution is acidic; if Kb > Ka, it is basic; if equal, neutral.
Common Misconceptions
A frequent error is assuming that all salts are neutral because table salt is. In reality, many common salts alter pH. For example, baking soda (sodium bicarbonate) is a salt that makes a mildly basic solution (pH around 8.3 at 0.1 mol/L). Another misconception is that pH measures the amount of salt in water—it does not; pH measures hydrogen ion activity. A solution can have a high salt concentration but still be neutral, like seawater (pH ~8.1) which is slightly basic due to dissolved carbonates, not sodium chloride.
Also, the pH of a salt solution depends on concentration for salts that hydrolyze. For instance, a 0.01 mol/L sodium acetate solution has a higher pH (more basic) than a 0.1 mol/L solution because hydrolysis is more pronounced at lower concentrations. The calculator above gives the pH for the weak acid + weak base case, but for salts like sodium acetate you would use a different formula: pH = 7 + 0.5 × (pKa + log C), where C is the salt concentration.
Practical Applications
Knowing a salt’s pH is important in many fields:
- Agriculture: Ammonium-based fertilizers can acidify soil over time, so farmers monitor pH.
- Food preservation: Salts like sodium nitrite affect pH and microbial growth.
- Swimming pools: Cyanuric acid salts (from chlorine stabilizers) can lower pH, requiring buffer adjustments.
- Biochemistry: Buffer solutions often use salts of weak acids (e.g., sodium phosphate) to maintain a constant pH.
- Water treatment: Alum (aluminum sulfate) is a salt that hydrolyzes to produce an acidic solution, used to coagulate particles.
In the lab, always measure pH with a calibrated meter rather than relying solely on calculations, because temperature, ionic strength, and dissolved CO2 can shift the actual pH. Follow your lab method, the safety data sheet (SDS) and your supervisor.
Frequently Asked Questions
What is the pH of salt water? It depends on the salt. Pure sodium chloride in distilled water gives pH 7. Seawater is about pH 8.1 because it contains carbonate and borate ions that act as buffers, not because of the NaCl.
Is salt acidic or basic? Most table salt is neutral, but salts can be acidic, basic, or neutral depending on their constituent ions. For example, ammonium chloride is acidic, sodium acetate is basic, and potassium nitrate is neutral.
Does adding salt to water change its pH? Adding pure NaCl does not change pH because neither ion hydrolyzes. Adding a salt like sodium bicarbonate will raise pH, while adding ammonium chloride will lower it.
How do I calculate the pH of a salt solution? For a salt of a weak acid and weak base, use pH = -log(√(Ka × Kb)). For a salt of a weak acid and strong base, use pH = 7 + 0.5 × (pKa + log C). For a salt of a strong acid and weak base, use pH = 7 – 0.5 × (pKb + log C). Here C is the salt concentration in mol/L.
Why is my pH meter reading different from my calculation? The calculation assumes ideal conditions at 25 °C. Real solutions have temperature differences, ionic strength effects, and dissolved gases that shift pH. Always calibrate the meter and measure at the same temperature as your calculation.
Can a salt have a pH below 0 or above 14? The pH scale typically runs 0–14, but concentrated strong acids can have negative pH values. For salt solutions, the pH usually stays within 0–14 because hydrolysis is weak, but very concentrated solutions of salts like aluminum chloride can be quite acidic (pH around 1–2).
Related
Formula used
in c | Salt concentration | mol/L | 0.10 | 0.000001 | 10 in ka | Acid dissociation constant Ka | - | 1.8e-5 | 1e-12 | 1 in kb | Base dissociation constant Kb | - | 1.8e-5 | 1e-12 | 1 out pH | pH of salt solution | - | -log10(sqrt(ka*kb)) | 2 out h | Hydrogen ion concentration | mol/L | sqrt(ka*kb) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Normality to g/L Converter & Formula29.220 g/L
- Normality to meq/mL Conversion Calculator1.0000 meq/mL
- Normality Test Q-Q Plot: How to Read It
- Normality Test Results: How to Analyze Them
- Normality Slay the Spire?
- Normality Test for Paired t Test: How to Check