Convert a temperature from Celsius (°C) to Fahrenheit (°F) with this calculator: enter a Celsius value to get its Fahrenheit equivalent. The conversion uses the standard linear formula, so it works for negative temperatures as well as everyday weather and laboratory readings.
Formula
To convert Celsius to Fahrenheit, multiply the Celsius temperature by 9/5, then add 32:
°F = (°C × 9/5) + 32
- °C is the temperature entered, in degrees Celsius.
- °F is the equivalent temperature, in degrees Fahrenheit.
- 9/5 is the ratio between the size of a Fahrenheit degree and a Celsius degree.
- 32 accounts for the difference between the scales’ zero points.
The calculator also shows kelvin as a reference: K = °C + 273.15. Celsius and kelvin have the same degree-size interval; their zero points differ by exactly 273.15. The Celsius input is limited to −273.15 °C because that is absolute zero, the lowest possible thermodynamic temperature.
Worked Example
Using the default input, 20 °C:
- Multiply by 9/5: 20 × 9/5 = 36.
- Add 32: 36 + 32 = 68 °F.
- For the additional kelvin result: 20 + 273.15 = 293.15 K.
So the calculator returns 68.0 °F and 293.15 K. The Fahrenheit answer is displayed to one decimal place, while the kelvin answer is displayed to two decimal places. Those display settings affect rounding, not the underlying conversion.
Assumptions
- The input is a temperature in degrees Celsius, not a temperature difference or a value in another unit.
- The standard Celsius-to-Fahrenheit scale relationship applies; no substance-specific correction is involved.
- The kelvin output is a direct scale conversion, not a measurement of energy or heat.
How the Celsius and Fahrenheit Scales Differ
Celsius and Fahrenheit are two temperature scales with different zero points and differently sized degrees. At standard atmospheric pressure, water freezes at 0 °C, equivalent to 32 °F, and boils at 100 °C, equivalent to 212 °F. The interval from freezing to boiling is therefore 100 Celsius degrees or 180 Fahrenheit degrees. That ratio, 180/100 or 9/5, explains why the conversion changes both the scale’s spacing and its starting point.
Despite familiar water-based reference points, the conversion formula does not depend on water. It applies to any valid temperature measurement, whether the value describes air, an object, or a controlled process. The boiling and freezing points can shift when pressure or other conditions change, but the scale conversion itself does not.
Temperature is also distinct from heat. Temperature describes a state; heat is energy transferred because of a temperature difference. Converting °C to °F changes how the same temperature is expressed, not the amount of heat in an object.
Useful Celsius-to-Fahrenheit Examples
- −40 °C = −40 °F. This is the point where the two scales have the same numerical value.
- 0 °C = 32 °F. This is a common reference for water freezing under standard pressure.
- 20 °C = 68 °F. This is a convenient room-temperature example, though comfortable indoor temperatures vary.
- 37 °C = 98.6 °F. This is a commonly cited human body temperature, not a universal reading for every person or measurement method.
- 100 °C = 212 °F. This is water’s boiling point at standard atmospheric pressure.
A quick mental estimate for ordinary temperatures is to double the Celsius number and add 30. For example, 20 °C gives an estimate of 70 °F, close to the exact 68 °F. This is only a shortcut: it is not the calculator’s formula and becomes less reliable for values far from everyday temperatures. Use 9/5 and 32 when accuracy matters.
Common Conversion Mistakes
- Adding 32 but forgetting to scale. The correct order is to multiply the Celsius value by 9/5 and then add 32.
- Using 5/9 in the wrong direction. The formula °C = (°F − 32) × 5/9 converts Fahrenheit to Celsius, not Celsius to Fahrenheit.
- Applying the offset to a temperature difference. For changes in temperature, 1 °C of difference equals 1.8 °F of difference; do not add 32 to a difference. For example, a rise of 10 °C is a rise of 18 °F.
- Confusing Celsius with kelvin. Celsius values can be negative; kelvin values cannot fall below zero. Add 273.15 to convert °C to K.
- Rounding too early. Keep the full input through the calculation and round only the displayed result. A rounded answer may differ slightly from a value calculated from an already rounded intermediate number.
When a Conversion Is Not Enough
A temperature conversion preserves the measured temperature, but it does not make two measurement methods interchangeable. Readings can vary because of sensor placement, calibration, response time, contact with a surface, or environmental conditions. If a value is near a threshold in a technical specification, use the specified unit and measurement method, and check the source’s tolerance rather than relying on a rounded conversion alone.
For cooking, the conversion tells you the equivalent number on another scale; it does not account for differences among ovens or guarantee that food has reached a safe internal temperature. For scientific work, use the unit required by the equation or protocol. In calculations involving gas laws or thermodynamic relationships, temperature generally needs to be expressed in kelvin, not Celsius or Fahrenheit. Convert units before substituting values, and follow the relevant method’s instructions.
Frequently Asked Questions
How do I convert Celsius to Fahrenheit?
Multiply the Celsius temperature by 9/5, then add 32. For example, 25 °C becomes (25 × 9/5) + 32 = 77 °F.
What is 20 °C in Fahrenheit?
20 °C is 68 °F. Calculation: (20 × 9/5) + 32 = 68.
Why do you add 32 when converting Celsius to Fahrenheit?
The scales have different zero points: 0 °C corresponds to 32 °F. The addition accounts for that offset after adjusting for the different degree sizes.
At what temperature are Celsius and Fahrenheit the same?
They are equal at −40 degrees: −40 °C = −40 °F.
Is a change of 1 °C the same as a change of 1 °F?
No. A change of 1 °C equals a change of 1.8 °F. The +32 offset is used for converting temperature values, not temperature differences.
How do I convert Celsius to kelvin?
Add 273.15: K = °C + 273.15. For example, 20 °C is 293.15 K.
Related
Formula used
in c | Temperature in Celsius | °C | 20 | -273.15 out f | Temperature in Fahrenheit | °F | (c * 9 / 5) + 32 | 1 out k | Temperature in kelvin | K | c + 273.15 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Skip Calculator for Soil: What It Can and Can’t Do7.500 m³
- USD to KPW Calculator: Convert Dollars to North Korean Won90,000.00 KPW
- OK Calculator on TV on the Radio? Meaning Explained
- Pension Calculator KP: Estimate Your Pension Benefits
- Neonatal Kp Calculator: What It Means80.0000 mmol/mmol
- Newton to kp Converter Calculator and Formula1.0000 kp