At room temperature (around 300 K) and atmospheric pressure, the thermal conductivity of hydrogen gas is approximately 0.182 W/(m·K), making it about seven times more conductive than air. This high value stems from hydrogen’s low molecular mass and the efficient energy transfer between its molecules, which is why hydrogen is used in specialized cooling applications.
Formula
The thermal conductivity of hydrogen gas (k) at moderate temperatures and pressures can be estimated using a linearized model based on the value at 25 °C and 1 atm:
k = k₀ × [1 + α × (T − 25)] × [1 + β × (P − 1)]
- k₀ = 0.182 W/(m·K) (thermal conductivity at 25 °C, 1 atm)
- α = 0.0035 per °C (temperature coefficient near room temperature)
- β = 0.0002 per atm (pressure coefficient, valid for moderate pressures)
- T = gas temperature in °C
- P = absolute pressure in atm
This approximation holds best between −100 °C and 500 °C and for pressures up to about 100 atm. For precise engineering work, consult published tables or a detailed equation of state.
Worked Example
Using the default values from the calculator: T = 25 °C, P = 1 atm.
k = 0.182 × [1 + 0.0035 × (25 − 25)] × [1 + 0.0002 × (1 − 1)]
k = 0.182 × [1 + 0] × [1 + 0] = 0.182 W/(m·K)
The calculator returns 0.1820 W/(m·K), matching the reference value.
Assumptions
- Hydrogen behaves as a dilute gas (ideal gas approximation).
- The temperature coefficient α is constant over the range shown; in reality it varies slightly with temperature.
- The pressure correction is linear and only approximate; at very high pressures (above 100 atm) real-gas effects become significant.
- No chemical reactions or dissociation occur (relevant above 2000 K, not covered here).
Why Hydrogen Conducts Heat So Well
Thermal conductivity in a gas arises from molecules carrying kinetic energy as they collide. Hydrogen molecules (H₂) have the lowest molecular mass of any gas (about 2.016 g/mol). At a given temperature, lighter molecules move faster, so they collide more frequently and transfer energy more effectively. Additionally, hydrogen molecules have rotational and vibrational energy modes that can participate in energy exchange, though at room temperature rotational modes dominate. The net effect is a thermal conductivity roughly 7 times that of air (air ≈ 0.026 W/(m·K)) and about 10 times that of nitrogen (≈ 0.026 W/(m·K)).
Temperature and Pressure Dependence
For most gases, thermal conductivity increases with temperature because molecular speed increases. Hydrogen follows this trend, but its coefficient is relatively modest—about 0.35% per °C near room temperature. Over the range 0–100 °C, the conductivity rises from about 0.168 to 0.216 W/(m·K).
Pressure has a weaker effect at moderate levels. In the dilute gas region (up to a few atmospheres), conductivity is nearly independent of pressure because the number of molecules per volume increases, but the mean free path decreases proportionally, keeping the product constant. Only at high pressures (above ~10 atm) does conductivity start to rise noticeably. For example, at 100 atm and 25 °C, the model predicts about 0.184 W/(m·K), a 1% increase.
Comparison with Other Gases
To put hydrogen’s conductivity in perspective:
- Helium: 0.151 W/(m·K) at 25 °C—second best, used in MRI magnets and cryogenics.
- Neon: 0.049 W/(m·K)
- Air: 0.026 W/(m·K)
- Carbon dioxide: 0.016 W/(m·K)
- Argon: 0.017 W/(m·K)
Hydrogen’s high conductivity makes it an excellent coolant for electrical generators, where it removes heat more efficiently than air, reducing windage losses. However, its flammability limits its use to sealed, carefully monitored systems.
Common Misconceptions
A frequent mistake is confusing thermal conductivity with heat capacity. Hydrogen has a high specific heat capacity (about 14.3 J/(g·K) at constant pressure), but conductivity measures how fast heat moves through the gas, not how much heat it can store. Another misconception is that hydrogen’s conductivity is due to convection; in fact, the high value is a molecular property, independent of bulk flow.
Some also assume that because hydrogen is lighter than air, it conducts heat better only because of buoyancy. That is incorrect—conductivity is a material property measured under static conditions. The low density actually reduces the number of molecules per volume, but the high speed compensates, resulting in high conductivity.
Practical Applications and Measurement
Hydrogen’s thermal conductivity is exploited in:
- Cooling of large electric generators in power plants (hydrogen-cooled rotors).
- Gas chromatography detectors (thermal conductivity detectors) that sense changes in gas composition.
- Leak detection: a thermal conductivity sensor can detect hydrogen leaks in pipes.
To measure conductivity in a lab, the transient hot-wire method is common: a thin metal wire is heated electrically, and the rate of temperature rise in the surrounding gas is recorded. The data are fitted to a model to extract conductivity. This method requires careful calibration and is sensitive to convection and radiation.
Safety and Handling
Hydrogen is highly flammable and forms explosive mixtures with air in a wide range (4–75% by volume). Any experiment or application involving hydrogen must follow strict lab protocols: use leak-tested equipment, avoid ignition sources, and work in a well-ventilated area or fume hood. Always consult the safety data sheet (SDS) and your supervisor before handling hydrogen. For thermal conductivity measurements, the gas is usually used at low pressure in a sealed cell, but even then, a leak could create a hazard.
Frequently Asked Questions
What is the exact thermal conductivity of hydrogen at 0 °C?
At 0 °C and 1 atm, the thermal conductivity of hydrogen is approximately 0.168 W/(m·K). Using the formula above with T = 0 °C gives 0.182 × (1 − 0.0035 × 25) = 0.166 W/(m·K), close to the tabulated value.
Why is hydrogen’s thermal conductivity so much higher than helium’s?
Helium is also monatomic and light, but hydrogen molecules have rotational energy levels that can exchange energy during collisions, adding an extra channel for heat transfer. Additionally, hydrogen’s molecular collisions are more efficient at transferring kinetic energy due to its diatomic nature.
Does thermal conductivity of hydrogen change with pressure?
At low to moderate pressures (up to about 10 atm), it changes very little—less than 1% per atm. At high pressures (above 100 atm), the gas becomes denser and molecular interactions increase, causing conductivity to rise more noticeably.
Can I use hydrogen as a coolant in a home refrigerator?
No. Hydrogen is flammable and poses a serious explosion risk in household appliances. Industrial generators use it in sealed, inerted systems with strict monitoring. For home use, safer coolants like air or helium (though helium is expensive) are used.
How does hydrogen’s thermal conductivity compare to that of water?
Liquid water has a thermal conductivity of about 0.6 W/(m·K), which is more than three times that of hydrogen gas. However, gases generally have lower conductivity than liquids and solids. Hydrogen’s high value is exceptional among gases, but still far below metals like copper (≈400 W/(m·K)).
Is thermal conductivity of hydrogen affected by its isotopic form (deuterium)?
Deuterium (D₂) has a higher molecular mass (4.028 g/mol), so its thermal conductivity is lower—about 0.128 W/(m·K) at 25 °C. The heavier molecules move slower, reducing the energy transfer rate.
For lab work, always follow your institution’s safety guidelines and the SDS for hydrogen. The calculator above gives a quick estimate for planning, but for precise measurements, use calibrated instruments and reference data.
Related
Formula used
in t | Gas temperature | °C | 25 | -100 | 500 in p | Pressure | atm | 1 | 0.01 | 100 out k | Thermal conductivity | W/(m·K) | (0.182 * (1 + 0.0035 * (t - 25))) * (1 + 0.0002 * (p - 1)) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED