molecalculator

Moles & Molar Mass

Melting Point of Ice Calculator and Explanation

Calculator No. 01-3550 · Updated · Formula and assumptions shown below

Melting point of ice 0.00 °C
Melting point of ice
32.00 °F
= Melting point of ice × 9 ÷ 5 + 32
Absolute pressure
101.325 kPa
Set in the form below
You enter
Absolute pressure (kPa)
You get
Melting point of ice (°C), Melting point of ice (°F)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Ice melts at 0 °C (32 °F) at standard atmospheric pressure; this calculator estimates the melting point in Celsius or Fahrenheit from a pressure value. Enter the absolute pressure in kilopascals to see the approximate melting temperature and the equivalent in Fahrenheit.

Formula

Near ordinary atmospheric pressure, the melting point of ice changes by roughly −0.0074 °C per kilopascal of pressure change. The calculator uses a linear approximation:

Tm = 273.15 K − 0.0074 °C/kPa × (P − 101.325 kPa)

It then converts the result to Celsius by subtracting 273.15, and to Fahrenheit using °F = °C × 9/5 + 32.

  • P is absolute pressure in kilopascals (kPa), not gauge pressure.
  • Tm is the estimated melting temperature of ordinary ice.
  • 101.325 kPa is standard atmospheric pressure, equivalent to one standard atmosphere.
  • 0.0074 °C/kPa is an approximate local slope for the ice–water melting curve near standard pressure.
  • 273.15 K is the melting temperature at standard pressure on the absolute temperature scale.

This simplified relation is useful for understanding small pressure changes around normal atmospheric conditions. It is not a general equation for high pressures or for other solid forms of water.

Worked Example

Using the calculator defaults, the pressure is 101.325 kPa.

  1. Pressure difference: 101.325 − 101.325 = 0 kPa.
  2. Temperature in kelvins: 273.15 − 0.0074 × 0 = 273.15 K.
  3. Convert to Celsius: 273.15 − 273.15 = 0.00 °C.
  4. Convert to Fahrenheit: 0.00 × 9/5 + 32 = 32.00 °F.

The calculator therefore returns a melting point of 0.00 °C, or 32.00 °F, at standard atmospheric pressure.

Assumptions

  • The substance is pure water ice in equilibrium with liquid water.
  • The input is absolute pressure in kPa. Atmospheric pressure at sea level is approximately 101.325 kPa; a gauge-pressure reading must be converted before use.
  • The linear pressure correction is intended only as a near-atmospheric estimate.
  • The calculation excludes dissolved salts, impurities, supercooling, and measurement uncertainty.

Why Ice Melts at 0 °C

At a specified pressure, a pure substance has a characteristic temperature at which its solid and liquid phases can coexist in equilibrium. For ordinary water at one standard atmosphere, that temperature is 0 °C. At the melting point, added heat can change ice into liquid water without immediately raising the temperature; the energy goes into the phase change, known as latent heat of fusion.

“Zero degrees” is not a universal melting point independent of conditions. Temperature scales are defined differently, and the phase boundary depends on pressure and composition. The familiar 0 °C value applies to pure water under the specified standard-pressure condition. Real samples can behave differently when they contain dissolved material or are measured away from equilibrium.

How Pressure Changes the Melting Point

Water is unusual because liquid water is denser than ordinary ice. Increasing pressure therefore favors the liquid phase and lowers the melting temperature of ice near everyday conditions. The calculator represents this behavior with an approximate decrease of 0.0074 °C for each 1 kPa increase in pressure.

For example, increasing pressure by 10 kPa changes the estimate by about −0.074 °C. This is a small shift, so an ordinary thermometer may not resolve it reliably. The relationship is not a constant straight line across all pressures: at sufficiently high pressure, water has other solid ice phases, and the phase diagram becomes more complicated. Do not extrapolate this calculator to extreme conditions.

What the Calculator Can and Cannot Tell You

This tool is for a quick estimate around standard atmospheric pressure, not a precision determination of a sample’s phase boundary. The approximation is most useful when the pressure is close to 101.325 kPa and the sample is nearly pure water. The more distant the pressure is from that value, the less appropriate a single linear slope becomes.

Pressure must be absolute. Absolute pressure is measured relative to a vacuum; gauge pressure is measured relative to the surrounding atmosphere. If a gauge reads 20 kPa above local atmospheric pressure, the absolute pressure is roughly local atmospheric pressure plus 20 kPa. Feeding 20 kPa directly into this calculator would produce a physically misleading estimate.

Likewise, the displayed digits are arithmetic precision, not a guarantee of experimental accuracy. The coefficient is approximate, and local atmospheric pressure can differ from standard pressure. For a scientific determination at unusual pressure, consult reliable water phase-boundary data rather than extending this simple formula.

Common Misconceptions and Sources of Difference

  • “Ice always melts at exactly 0 °C.” That is the standard-pressure value for pure water in equilibrium, not a rule for every pressure or mixture.
  • Salt makes ice warmer. Dissolved salt lowers water’s freezing point, so an ice–salt mixture can remain partly liquid below 0 °C. This is a composition effect, not the pressure correction used here.
  • Pressure melts icebergs or skating ice by itself. Pressure can shift the melting point, but everyday effects involve several factors, including friction, heat transfer, and surface conditions. The small near-standard pressure shift alone should not be treated as a complete explanation.
  • Supercooled water disproves the melting point. Liquid water can sometimes remain liquid below its equilibrium freezing point if ice crystals do not nucleate. This metastable state does not change the equilibrium melting temperature.

Frequently Asked Questions

What is the melting point of ice in Celsius?
Pure ice melts at 0 °C at standard atmospheric pressure, approximately 101.325 kPa.

What is the melting point of ice in Fahrenheit?
At standard atmospheric pressure, it is 32 °F.

Does pressure raise or lower the melting point of ice?
Near ordinary pressure, increasing pressure lowers the melting point of ordinary ice because liquid water is denser than ice.

Does salt change the melting point of ice?
Salt dissolved in water lowers the mixture’s freezing or melting temperature. The amount of change depends on salt concentration and composition.

Is this calculator accurate at very high pressure?
No. It uses a local linear approximation near standard atmospheric pressure. High-pressure water requires phase-boundary data that account for different ice phases.

Related

Formula used
in p | Absolute pressure | kPa | 101.325 | 0.001
out tc | Melting point of ice | °C | (273.15 - 0.0074 * (p - 101.325)) - 273.15 | 2
out tf | Melting point of ice | °F | tc * 9 / 5 + 32 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →