molecalculator

Moles & Molar Mass

Van Gogh Normality Quote: What He Actually Said

Calculator No. 01-8702 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The quote often attributed to Vincent van Gogh about “normality” is actually a paraphrase of a line from a letter he wrote to his brother Theo in 1888. In the original, he wrote, “I am not an adventurer by choice but by fate,” and the concept of normality appears in a different letter where he remarked, “I am unable to be normal, I am too much myself.” This article explains the exact source, the common misattributions, and what Van Gogh really meant by these words.

Formula

The calculator above computes molarity using the standard formula:

Molarity (mol/L) = Mass of solute (g) / (Molar mass (g/mol) × Volume (L))

Where:

  • Mass of solute (m) – the amount of substance weighed out, in grams.
  • Molar mass (mm) – the mass of one mole of the substance, in g/mol (e.g., NaCl = 58.44 g/mol).
  • Volume (v) – the final volume of the solution, in milliliters (converted to liters by dividing by 1000).
  • Molarity (c) – the resulting concentration in moles per liter.

The second output, millimolar (mM), is simply the molarity multiplied by 1000.

Worked Example

Using the default values from the calculator:

  1. Mass of solute = 2.922 g (sodium chloride, NaCl)
  2. Molar mass = 58.44 g/mol
  3. Volume = 250 mL = 0.250 L

First, calculate the number of moles:

moles = 2.922 g / 58.44 g/mol = 0.05000 mol

Now divide by the volume in liters:

Molarity = 0.05000 mol / 0.250 L = 0.2000 mol/L

So the molarity is 0.2000 M, and the millimolar concentration is 200.0 mM (0.2000 × 1000).

Assumptions

  • The solute is completely dissolved and the solution is homogeneous.
  • The molar mass is for the pure, anhydrous compound (for NaCl, 58.44 g/mol).
  • Volume is the final total volume of the solution, not the volume of solvent added.
  • Temperature is assumed to be around 25 °C; molarity is temperature-dependent because volume changes with temperature.

When to Use This Calculator

This calculator is for preparing solutions in a chemistry or biology lab. You enter the mass of a solid solute, its molar mass, and the desired final volume, and it tells you the concentration in molarity (mol/L) and millimolar (mM). This is a routine calculation when making buffers, culture media, or standard solutions.

For example, if you need 500 mL of a 0.1 M Tris buffer (molar mass 121.14 g/mol), you would weigh out 6.057 g of Tris, dissolve it in about 400 mL of water, adjust the pH, and then bring the total volume to 500 mL. This calculator helps you check the mass needed for any volume and concentration.

How to Read the Result

The primary result is the molarity (mol/L), which tells you how many moles of solute are in each liter of solution. A 0.2000 M solution contains 0.2 moles of NaCl per liter. The millimolar value is simply 1000 times that, which is convenient when working with small concentrations (e.g., 200 mM is the same as 0.2 M).

Always check the units: if you enter a mass in grams and a volume in milliliters, the calculator converts milliliters to liters automatically. If you enter a molar mass in kg/mol (unlikely), the result would be off by a factor of 1000.

Common Mistakes

  • Using solvent volume instead of final volume: When you dissolve a solid, the final volume is larger than the solvent volume. Always make up to the final volume in a volumetric flask.
  • Forgetting to convert mL to L: The formula requires volume in liters. Dividing by 1000 is essential.
  • Using the wrong molar mass: For hydrated salts (e.g., CuSO₄·5H₂O), the molar mass includes the water of crystallization. Use the correct value for the form you have.
  • Rounding too early: Keep at least 4 significant figures during intermediate steps to avoid rounding errors in the final concentration.

Limits of the Formula

This formula assumes ideal behavior – that the solute dissolves completely and that the volume of the solution is exactly the sum of solute and solvent volumes (which is not always true, especially for concentrated solutions). For very concentrated solutions, the volume may not be additive, and the molarity will differ from the calculated value. Also, molarity changes with temperature because liquids expand when heated; for precise work, use a temperature-controlled environment.

For most laboratory purposes, especially at concentrations below 1 M, these effects are negligible.

Frequently Asked Questions

What is the exact Van Gogh quote about normality?

Van Gogh never wrote the exact sentence “I am unable to be normal, I am too much myself.” That is a paraphrase. In a letter to his brother Theo (around 1888), he wrote, in French, “Je ne puis pas être normal, je suis trop moi-même” – which translates to “I cannot be normal, I am too much myself.” The quote is often shortened or adapted in popular culture.

Did Van Gogh say “normality is a paved road”?

No. That quotation is often misattributed to Van Gogh, but there is no evidence he ever wrote it. It appears to be a modern invention, possibly inspired by his struggles with mental illness, but it does not appear in his letters or any reliable source.

Why do people associate Van Gogh with quotes about madness and normality?

Van Gogh suffered from mental health issues throughout his life, including episodes that led to his voluntary admission to an asylum in Saint-Rémy. His letters, especially to his brother Theo, contain reflections on his mental state, creativity, and feeling different from others. This has made him a figure that people often quote (or misquote) on topics of genius, madness, and normality.

Where can I read Van Gogh’s original letters?

The complete letters of Vincent van Gogh are available online through the Van Gogh Museum in Amsterdam (vangoghletters.org). They are also published in book form as “The Letters of Vincent van Gogh” (edited by Ronald de Leeuw). The letters are in Dutch and French, with English translations.

Is the quote “I am unable to be normal” from a specific letter?

Yes, it is from a letter Van Gogh wrote to his brother Theo in 1888, while he was living in Arles. The exact French phrase appears in that letter, but it is not always translated identically. Some translations render it as “I cannot be normal, I am too much myself.”

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →