molecalculator

Moles & Molar Mass

What Constitutes the Mass of Glucose

Calculator No. 01-9896 · Updated · Formula and assumptions shown below

Molarity 0.0649 mol/L
Concentration in millimolar
64.88 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
180.156 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Glucose mass is the total weight of all the atoms in a glucose molecule (C6H12O6), which for one mole equals 180.156 g/mol. This value comes from summing the atomic masses of 6 carbon, 12 hydrogen, and 6 oxygen atoms, and it is what you use to convert between grams and moles in any lab calculation.

Formula

The molar mass of glucose is calculated from its molecular formula C6H12O6:

Molar mass (g/mol) = (6 × atomic mass of C) + (12 × atomic mass of H) + (6 × atomic mass of O)

  • C (carbon): 6 × 12.011 = 72.066 g/mol
  • H (hydrogen): 12 × 1.008 = 12.096 g/mol
  • O (oxygen): 6 × 15.999 = 95.994 g/mol

Sum: 72.066 + 12.096 + 95.994 = 180.156 g/mol. This is the mass of one mole (6.022 × 1023 molecules) of glucose. To convert mass to moles, use moles = mass (g) ÷ molar mass (g/mol). To prepare a solution of known molarity, use mass (g) = molarity (mol/L) × volume (L) × molar mass (g/mol).

Worked Example

You need 250 mL of a 0.0649 M glucose solution. How many grams of glucose do you weigh out?

  1. Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
  2. Use the formula: mass = molarity × volume × molar mass
  3. mass = 0.0649 mol/L × 0.250 L × 180.156 g/mol
  4. mass = 0.016225 mol × 180.156 g/mol = 2.922 g (rounded to 3 decimals)

The calculator above gives the same result: entering 2.922 g, 180.156 g/mol, and 250 mL yields a molarity of 0.0649 mol/L (64.9 mM).

Assumptions

  • The glucose is anhydrous (no water of crystallization).
  • The molar mass uses IUPAC abridged atomic weights; actual isotopic composition may cause tiny variations.
  • The final solution volume is 250 mL, not 250 mL of solvent added to solute (you dissolve then adjust to final volume).
  • The solution is dilute enough that volume changes on dissolving are negligible.

Why the Molar Mass Matters in the Lab

Knowing the mass of glucose is essential for preparing media, buffers, and standard solutions in biochemistry, microbiology, and clinical chemistry. For example, cell culture media often require a specific glucose concentration (e.g., 25 mM). To make 500 mL of 25 mM glucose:

  • mass = 0.025 mol/L × 0.500 L × 180.156 g/mol = 2.252 g
  • Weigh 2.252 g of glucose, dissolve in ~400 mL water, then bring total volume to 500 mL.

The same calculation applies to making stock solutions for enzymatic assays, fermentation studies, or calibration standards for glucose meters.

Common Mistakes and How to Avoid Them

  • Using the wrong molar mass: Some sources round to 180 g/mol or use 180.16. For precise work, use 180.156 g/mol. The difference is small but can matter in high-accuracy assays.
  • Mixing up grams and moles: A mole is a count of molecules (6.022 × 1023), not a mass. Always convert using the molar mass.
  • Forgetting to convert mL to L: Molarity is moles per liter, so volume must be in liters. 250 mL = 0.250 L, not 250 L.
  • Adding solvent to solute instead of solute to solvent: For precise molarity, dissolve the solute in a portion of solvent, then add solvent to the final volume mark. Adding 250 mL of water to 2.922 g of glucose gives a slightly larger volume and a lower molarity than intended.
  • Ignoring hydration: Glucose is usually anhydrous, but some commercial preparations contain water. If you use glucose monohydrate (C6H12O6·H2O, molar mass 198.17 g/mol), you must account for the extra water.

How to Choose the Right Molar Mass for Your Work

Always check the label of your reagent. Anhydrous glucose (molar mass 180.156) is most common. If the label says “glucose monohydrate” or “D-glucose monohydrate,” use 198.17 g/mol. For physiological experiments, you may see glucose concentrations in mg/dL (e.g., blood glucose 90 mg/dL). To convert to molarity:

  • mg/dL to g/L: divide by 100 (since 1 dL = 0.1 L)
  • 90 mg/dL = 0.90 g/L
  • moles/L = 0.90 g/L ÷ 180.156 g/mol = 0.004995 mol/L ≈ 5.0 mM

This conversion is routine in clinical chemistry and metabolic research.

Frequently Asked Questions

What is the mass of one glucose molecule in grams?

One molecule of glucose weighs 180.156 g/mol ÷ 6.022 × 1023 molecules/mol ≈ 2.99 × 10−22 g. This is the absolute mass of a single molecule, rarely used directly; the molar mass is far more practical.

Why is glucose’s molar mass not exactly 180?

The exact value depends on the atomic weights of carbon, hydrogen, and oxygen, which are averages of naturally occurring isotopes. Carbon is 12.011 (not 12), hydrogen is 1.008 (not 1), and oxygen is 15.999 (not 16). Summing these gives 180.156, not 180. The rounded 180 is convenient for rough work but not for precise stoichiometry.

Does glucose have the same molar mass as fructose?

Yes, fructose and glucose are isomers with the same molecular formula C6H12O6, so they have the same molar mass (180.156 g/mol). However, their physical properties differ, and in some reactions the amount of water of crystallization can differ.

How do I calculate the mass of glucose needed for a 1 M solution?

For 1 L of 1 M glucose, you need 1 mole, which is 180.156 g. For a different volume, scale proportionally: for 500 mL, use 90.078 g; for 250 mL, use 45.039 g. Always dissolve in less than final volume and then adjust to the mark.

Is glucose molar mass the same as dextrose molar mass?

Yes, dextrose is another name for D-glucose, the same molecule. The molar mass is identical. The term “dextrose” is often used in medical and food contexts, but chemically it is glucose.

Can I use the molar mass to convert grams of glucose to number of molecules?

Yes. First convert grams to moles (divide by 180.156), then multiply by Avogadro’s number (6.022 × 1023). For example, 1 g of glucose is 0.00555 mol, which is 3.34 × 1021 molecules.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 180.156 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →