molecalculator

Moles & Molar Mass

What Is k for a Gas? Boltzmann Constant Calculator

Calculator No. 01-3420 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator works out the Boltzmann constant, k, in joules per kelvin from the ideal-gas constant R and Avogadro constant NA. Enter R in J/(mol·K) and NA in mol−1; the result is k in J/K for one particle.

Formula

The Boltzmann constant is the molar gas constant divided by the Avogadro constant:

k = R / NA

  • k is the Boltzmann constant, in joules per kelvin (J/K), per particle.
  • R is the molar gas constant, in joules per mole per kelvin (J/(mol·K)).
  • NA is the Avogadro constant, in reciprocal moles (mol−1), the number of specified particles in one mole.

The units reduce as follows: [J/(mol·K)] / [mol−1] = J/K. The exact SI values are R = 8.31446261815324 J/(mol·K) and NA = 6.02214076 × 1023 mol−1. Their quotient is about 1.380649 × 10−23 J/K. In the SI, the Boltzmann constant is defined to have the exact value 1.380649 × 10−23 J/K; this calculator demonstrates its relation to R and NA, rather than determining an uncertain physical constant.

Worked Example

Use the calculator’s default values:

  • R = 8.31446261815324 J/(mol·K)
  • NA = 6.02214076 × 1023 mol−1

Substitute into k = R / NA:

k = 8.31446261815324 / (6.02214076 × 1023) J/K

k ≈ 1.380649 × 10−23 J/K

To six significant decimal places in the coefficient, this is 0.00000000000000000000001380649 J/K, or 1.380649 × 10−23 J/K. The scientific-notation form is much easier to read; the calculator’s display may use that format.

Assumptions

  • The calculation uses the exact SI values of R and NA shown above.
  • “Particle” means the specified microscopic entity—such as an atom, molecule, or ion—counted consistently in the chosen amount of substance.
  • This is a constant conversion, not a prediction of a particular gas’s behavior or a substitute for an equation of state.

What k Means in Gas Equations

In a gas, k connects temperature to energy at the scale of individual particles. Temperature in these equations must be absolute temperature in kelvins (K), not degrees Celsius. A temperature increase changes the characteristic thermal energy per particle; the simple energy scale kT has units of joules.

For an ideal gas, the particle-level equation of state is pV = NkT. Here p is pressure in pascals, V is volume in cubic metres, N is the number of gas particles, k is in J/K, and T is in K. The equivalent molar form is pV = nRT, where n is amount in moles. Since N = nNA and R = NAk, the two forms express the same ideal-gas relationship with different ways of counting matter.

This distinction answers a common question: k is not a special value that changes from one gas to another. It is a universal constant. What can differ between gases are properties such as molecular mass, intermolecular interactions, and how closely the gas follows the ideal-gas model under a given set of conditions.

How to Use the Calculator

Use the default inputs when you want to see the standard SI relationship. If using other values for a calculation or classroom exercise, enter R in J/(mol·K) and NA in mol−1; do not enter an Avogadro number without its power of ten. The output is k per particle, not per mole.

  • For particle-count equations, use k with N, the number of particles, and absolute temperature T.
  • For molar equations, use R with n, the amount in moles, and T.
  • Do not combine k and R in the same equation as if they represented the same units; they differ by the factor NA.

For example, pV and NkT both have units of energy: Pa·m3 = J, and (particle count) × (J/K) × K = J. Particle count is a count rather than a molar amount, which is why k is much smaller numerically than R.

Common Notation and Misconceptions

In physics and chemistry, the lowercase italic letter k commonly denotes the Boltzmann constant, particularly in statistical mechanics and particle-level gas equations. Context matters: k can stand for other quantities in other formulas, such as a rate constant or a spring constant. A symbol is identified by its equation and units, not by the letter alone.

Do not confuse k with K, the symbol for kelvin, or with kPa, a unit of pressure. Also distinguish the Boltzmann constant from the ideal-gas constant R. R applies per mole; k applies per particle. A frequent source of mistakes is putting the number of moles into pV = NkT, or putting the number of individual particles into pV = nRT. Use the matching count and constant.

Another misconception is that k is an adjustable constant chosen to fit a gas. Its SI value is fixed. Real gases may depart from pV = NkT because their particles have finite size and interact; changing k is not the remedy. A more suitable non-ideal-gas model may be needed for those conditions.

Frequently Asked Questions

What is the value of k for a gas?
The Boltzmann constant is exactly 1.380649 × 10−23 J/K in the SI. It is universal, not gas-specific.

What does k stand for in the ideal gas law?
In pV = NkT, k is the Boltzmann constant and N is the number of particles. The equivalent molar equation is pV = nRT.

What is the difference between k and R?
k is energy per kelvin per particle, while R is energy per kelvin per mole. They are related by R = NAk.

Does k change with temperature or gas type?
No. The Boltzmann constant does not depend on temperature or the identity of the gas. Temperature and gas-specific properties affect the system’s behavior, not the value of k.

Should temperature be in Celsius or kelvin?
Use kelvin in gas-law equations involving k. Convert Celsius to kelvin by adding 273.15; Celsius values cannot be substituted directly as absolute temperature.

Why is k so small compared with R?
R is the corresponding constant for one mole, which contains 6.02214076 × 1023 specified particles. Dividing R by that number gives the much smaller per-particle value k.

Scope and Limits

The calculator performs the exact constant conversion k = R/NA. It does not calculate pressure, volume, particle count, or a gas’s deviation from ideal behavior; those require additional quantities and, for real-gas corrections, an appropriate model and substance-specific data. For laboratory work, follow your lab method, the safety data sheet (SDS) and your supervisor.

Related

Formula used
in r | Molar gas constant R | J/(mol·K) | 8.31446261815324 | 0
in na | Avogadro constant N_A | mol^-1 | 6.02214076e23 | 0
out k | Boltzmann constant k | J/K | r / na | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →