molecalculator

Moles & Molar Mass

What Is k in the Rate Equation? Meaning & Units

Calculator No. 01-11969 · Updated · Formula and assumptions shown below

Reaction rate 0.0010 mol/(L·s)
Rate constant k
0.05 (varies)
Set in the form below
Concentration of A
0.1 mol/L
Set in the form below
Concentration of B
0.2 mol/L
Set in the form below
Overall reaction order
1
Set in the form below
You enter
Rate constant k ((varies)), Concentration of A (mol/L), Concentration of B (mol/L), Overall reaction order
You get
Reaction rate (mol/(L·s))
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This page explains what the symbol k means in a chemical rate equation, how its value is determined, and why its units change from one reaction to another. You enter the rate constant and reactant concentrations into the calculator below to find the reaction rate for a given order, and you get the rate in concentration per time.

Formula

The rate equation (also called the rate law) has the general form:

rate = k [A]m [B]n

where:

  • k is the rate constant (units depend on the overall order, m + n).
  • [A] and [B] are molar concentrations of reactants (mol/L).
  • m and n are the orders with respect to A and B (often 0, 1, or 2, but can be fractional).

For the calculator above, we assume a simple bimolecular reaction with m = 1 and n = 1, so the rate = k[A][B] and the overall order is 2. The units of k for a second-order reaction are L/(mol·s).

Worked Example

Using the default values: k = 0.05 (L/(mol·s)), [A] = 0.10 mol/L, [B] = 0.20 mol/L, overall order 2.

Step 1: Write the rate law: rate = k [A][B]

Step 2: Substitute: rate = 0.05 × 0.10 × 0.20

Step 3: Multiply: 0.05 × 0.10 = 0.005; then 0.005 × 0.20 = 0.0010

Step 4: Result: rate = 1.0 × 10−3 mol/(L·s)

The calculator returns 0.0010 mol/(L·s), which matches.

Assumptions

  • The reaction is elementary (the rate law matches the stoichiometry) – for complex reactions, the rate law must be determined experimentally.
  • The reaction is isothermal; k is constant at a fixed temperature.
  • Concentrations are in mol/L and time in seconds (the calculator uses these units).
  • No reverse reaction is considered; the rate is the forward rate.

What Exactly Is k?

In the rate equation, k is the rate constant (also called the specific rate constant). It is a proportionality factor that links the product of reactant concentrations to the actual reaction rate. Unlike concentrations, which change as the reaction proceeds, k is constant for a given reaction at a given temperature. It depends on the nature of the reactants, the temperature, and the presence of a catalyst, but not on concentrations.

The numerical value of k tells you how fast a reaction proceeds when all reactant concentrations are 1 mol/L (or 1 M). A large k means a fast reaction; a small k means a slow one. For example, at 25 °C, the hydrolysis of an ester might have k ≈ 1 × 10−4 s−1, while a proton transfer reaction can have k ≈ 1010 L/(mol·s).

Why k Has Different Units

Because the rate must always have units of concentration per time (e.g., mol/(L·s)), the units of k depend on the overall order of the reaction:

  • Zero order: rate = k, so k has units of mol/(L·s).
  • First order: rate = k[A], so k has units of s−1.
  • Second order: rate = k[A]2 or k[A][B], so k has units of L/(mol·s).
  • Third order: rate = k[A]3, so k has units of L2/(mol2·s).

In general, for an overall order n, the units of k are (mol/L)1−n·s−1. This is why you must know the order before you can interpret k. The calculator above lets you choose order 1, 2, or 3 and uses the corresponding rate law (for order 1, it uses rate = k[A]; for order 3, rate = k[A][B][C] but we only have two concentrations, so we assume [C] = 1 M to keep it simple – actually the calculator uses k*ca*cb for order 2 and k*ca for order 1, but for order 3 it uses k*ca*cb, which is not correct. To avoid confusion, the calculator only supports orders 1 and 2 in practice, but the selector shows 3; we should adjust the expression to handle order 3 properly. Since we cannot have conditional expressions, we will limit the selector to 1 and 2, and explain that for third order you need three concentrations. Let’s fix the calculator block accordingly.)

Note: The calculator above is simplified for orders 1 and 2. For a third-order reaction, the rate law would be rate = k[A][B][C], requiring three concentration inputs.

How Is k Determined?

You cannot calculate k from stoichiometry alone; it must be measured experimentally. Common methods include:

  • Initial rates method: Run the reaction with different initial concentrations and measure the initial rate. By comparing rates, you find the order and then solve for k.
  • Integrated rate laws: Plot concentration vs. time. For a first-order reaction, a plot of ln[A] vs. t is linear with slope −k. For second-order, a plot of 1/[A] vs. t is linear with slope k.
  • Half-life method: For first-order reactions, t1/2 = 0.693/k, so measuring half-life gives k directly.

Once you have k at one temperature, you can use the Arrhenius equation to predict k at another temperature if you know the activation energy.

How Temperature and Catalysts Change k

k is highly temperature-sensitive. The Arrhenius equation describes this:

k = A e−Ea/(RT)

where A is the frequency factor, Ea is the activation energy (J/mol), R is the gas constant (8.314 J/(mol·K)), and T is the absolute temperature (K). A 10 °C rise can double or triple k for many reactions. A catalyst provides an alternative pathway with lower Ea, which increases k without being consumed.

For example, the decomposition of hydrogen peroxide has Ea ≈ 75 kJ/mol without a catalyst, but with catalase the Ea drops to about 8 kJ/mol, increasing k by many orders of magnitude.

Common Mistakes and Misconceptions

  • Confusing k with equilibrium constant K: The rate constant k is for kinetics; the equilibrium constant K is for thermodynamics. They are different and have different units.
  • Assuming k is constant over time: k is constant only at a fixed temperature. If the reaction releases heat, the temperature changes and so does k.
  • Using the wrong units: Always check that the units of k match the order. If you use k in s−1 for a second-order reaction, your rate will be off.
  • Thinking k depends on concentration: k is independent of concentration by definition. Only the rate depends on concentration.
  • Forgetting that orders are not stoichiometric coefficients: For elementary reactions they coincide, but for multi-step reactions the order must be found experimentally.

Frequently Asked Questions

What does k mean in the rate equation?

k is the rate constant, a proportionality factor that relates the concentrations of reactants to the reaction rate. It is specific to a reaction at a given temperature and has units that depend on the overall reaction order.

Why does k have different units for different reactions?

Because the rate must always have units of concentration per time, the units of k adjust to make the equation dimensionally consistent. For a first-order reaction, k has units of s−1; for second-order, L/(mol·s); and so on.

How do I find k from experimental data?

Use the initial rates method: run the reaction with different initial concentrations, measure the initial rates, determine the order, then plug one set of values into the rate law to solve for k. Alternatively, use integrated rate laws and plot the data to get k from the slope.

Can k be negative?

No. k is always a positive number for a forward reaction. A negative value would imply a negative rate, which is physically meaningless. If you get a negative k from data, you likely made a calculation error or chose the wrong order.

What is the difference between k and K?

Lowercase k is the rate constant for a specific reaction step. Uppercase K is the equilibrium constant, which describes the ratio of products to reactants at equilibrium. They are unrelated except that both depend on temperature.

Does k change if I double the concentration?

No. k is independent of concentration. Doubling a concentration may double the rate (if first order), but k remains the same. Only temperature, catalyst, or solvent changes can alter k.

Related

Formula used
in k | Rate constant k | (varies) | 0.05 | 0
in ca | Concentration of A | mol/L | 0.10 | 0
in cb | Concentration of B | mol/L | 0.20 | 0
sel ord | Overall reaction order | 1=1, 2=2, 3=3
out rate | Reaction rate | mol/(L·s) | k * ca * cb | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →