molecalculator

Moles & Molar Mass

Calcium Phosphate Formula & Its Many Forms

Calculator No. 01-12029 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This page explains the chemical formula of calcium phosphate and what that formula actually means, because the name covers several related compounds. You enter nothing here—the calculator below converts between the three common forms (tricalcium phosphate, dicalcium phosphate, and monocalcium phosphate) and shows their formulas, molar masses, and calcium content. Use it to check which form you are working with in a recipe, a fertilizer label, or a lab protocol.

Formula

The most common “calcium phosphate” in general chemistry is tricalcium phosphate, with the formula Ca3(PO4)2. It contains three calcium ions (Ca2+) and two phosphate ions (PO43−). The formula unit mass is 310.18 g/mol, and calcium makes up about 38.8% of that mass.

But the term is also used for two other salts:

  • Dicalcium phosphate – CaHPO4, molar mass 136.06 g/mol, about 29.5% calcium.
  • Monocalcium phosphate – Ca(H2PO4)2, molar mass 234.05 g/mol, about 17.1% calcium.

All three are calcium salts of phosphoric acid (H3PO4). The names come from how many hydrogen atoms remain on the phosphate group after neutralization. In Ca(H2PO4)2, each phosphate still has two hydrogens; in CaHPO4, one hydrogen remains; in Ca3(PO4)2, none remain.

Worked Example

Using the default selection (tricalcium phosphate), the molar mass is calculated as:

Ca: 40.078 g/mol × 3 = 120.234 g/mol
P: 30.974 g/mol × 2 = 61.948 g/mol
O: 15.999 g/mol × 8 = 127.992 g/mol
Total = 120.234 + 61.948 + 127.992 = 310.174 g/mol, which rounds to 310.18 g/mol.

Calcium percentage = (120.234 / 310.174) × 100 = 38.76%, which the calculator shows as 38.8%.

If you switch to dicalcium phosphate, the molar mass is 40.078 + 1.008 + 30.974 + (4 × 15.999) = 136.06 g/mol, and calcium percentage = (40.078 / 136.06) × 100 = 29.5%. For monocalcium phosphate, the mass is 40.078 + 2×(1.008×2 + 30.974 + 4×15.999) = 234.05 g/mol, and calcium percentage = (40.078 / 234.05) × 100 = 17.1%.

Assumptions

  • Atomic weights are IUPAC abridged standard values (Ca 40.078, P 30.974, O 15.999, H 1.008).
  • The compounds are anhydrous (no water of hydration). Hydrated forms like CaHPO4·2H2O have different molar masses.
  • The percentages are mass percentages of elemental calcium, not of calcium oxide or any other form.

Why the Formula Matters

Knowing which calcium phosphate you have matters because the three forms behave differently. Tricalcium phosphate is nearly insoluble in water (about 0.002 g/100 mL at 25 °C), which is why it is used as an anti-caking agent and in bone graft substitutes. Dicalcium phosphate is slightly more soluble and is a common excipient in tablets. Monocalcium phosphate is the most soluble and is the leavening acid in baking powder—it reacts with sodium bicarbonate to release carbon dioxide.

The formula also tells you the calcium-to-phosphorus ratio. Tricalcium phosphate has a Ca:P ratio of 3:2 (1.5), dicalcium phosphate 1:1, and monocalcium phosphate 1:2. This ratio is important in animal feed and fertilizer formulations, where the balance of calcium and phosphorus affects absorption and plant uptake.

Common Misconceptions

A frequent mistake is writing Ca2(PO4)3 or Ca(PO4)2. The correct formula must balance charges: Ca2+ and PO43−. The least common multiple of 2 and 3 is 6, so you need three Ca2+ (total +6) and two PO43− (total −6). That gives Ca3(PO4)2.

Another misconception is that “calcium phosphate” always means the tricalcium form. In food labels and fertilizer bags, the name may refer to any of the three, or even to mixtures. Always check the specific chemical name or E number (E341 is monocalcium phosphate, E341(ii) is dicalcium, E341(iii) is tricalcium).

How to Choose the Right Form

If you are selecting a calcium phosphate for a specific use, consider the following:

  • For a calcium supplement, dicalcium phosphate is common because it provides a reasonable calcium percentage and is well absorbed.
  • For baking powder, monocalcium phosphate is the standard leavening acid.
  • For ceramics or bone cements, tricalcium phosphate (often β-TCP) is used for its biocompatibility.
  • For fertilizer, the water-soluble monocalcium form is preferred for quick phosphorus availability, while tricalcium phosphate is nearly useless as a direct fertilizer because plants cannot absorb it.

Check the label or the SDS for the exact chemical identity and hydration state before using it in any process.

Safety and Handling

Calcium phosphates are generally low in toxicity, but dust can irritate eyes and respiratory tract. When handling powders, wear gloves and a dust mask, and avoid creating airborne dust. In the lab, follow your lab method, the safety data sheet (SDS), and your supervisor. Do not ingest any chemical unless it is explicitly food-grade and intended for consumption.

Frequently Asked Questions

What is the formula for calcium phosphate in bone?

Bone mineral is not exactly Ca3(PO4)2; it is a carbonated hydroxyapatite, Ca10(PO4)6(OH)2, with substitutions of carbonate and other ions. The simplified formula Ca3(PO4)2 is often used in introductory texts, but the actual mineral is more complex.

Is calcium phosphate the same as calcium phosphide?

No. Calcium phosphide is Ca3P2, a dark red solid that reacts with water to produce phosphine gas, which is toxic and spontaneously flammable. Calcium phosphate is a safe, white, powdery salt. Never confuse the two.

Why is calcium phosphate insoluble in water?

The strong electrostatic attraction between Ca2+ and PO43− ions in the crystal lattice is much greater than the energy gained by hydration, so the lattice does not break apart easily. The solubility product (Ksp) of Ca3(PO4)2 is about 2.07 × 10−33, which is extremely low.

What is the pH of calcium phosphate in water?

Tricalcium phosphate is slightly basic because the phosphate ion can accept protons. A saturated solution has a pH around 8–9. Dicalcium phosphate is closer to neutral (pH ~7), and monocalcium phosphate is acidic (pH ~3–4) because it releases H+ ions.

How do I convert between the forms?

You can convert by reacting with phosphoric acid or calcium hydroxide. For example, adding phosphoric acid to tricalcium phosphate yields monocalcium phosphate: Ca3(PO4)2 + 4 H3PO4 → 3 Ca(H2PO4)2. In practice, these conversions are done industrially, not in a home lab.

Related

Formula used
in sel | Form | Tricalcium phosphate=1, Dicalcium phosphate=2, Monocalcium phosphate=3
out formula | Formula | - | sel==1 ? "Ca3(PO4)2" : sel==2 ? "CaHPO4" : "Ca(H2PO4)2" | 0
out mw | Molar mass | g/mol | sel==1 ? 310.18 : sel==2 ? 136.06 : 234.05 | 2
out ca | Calcium content | % | sel==1 ? (3*40.078/310.18)*100 : sel==2 ? (40.078/136.06)*100 : (40.078/234.05)*100 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →