molecalculator

Moles & Molar Mass

What DNA Segment Codes for mRNA? Explained

Calculator No. 01-8202 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The segment of DNA that codes for messenger RNA (mRNA) is called a gene, specifically the transcription unit that includes a promoter, the transcribed region, and a terminator. During transcription, RNA polymerase reads the template strand of this DNA segment and synthesizes a complementary mRNA molecule, which then carries the genetic instructions to the ribosome for protein synthesis.

Formula

The molarity (concentration) of a solution is calculated as:

c = m / (M × V)

Where:

  • c = molarity of the solution (mol/L, often written as M)
  • m = mass of the solute (g)
  • M = molar mass of the solute (g/mol)
  • V = final volume of the solution (L)

Since the volume is entered in milliliters, the formula in the calculator divides by 1000 to convert mL to L: c = m / (M × (V/1000)).

Worked Example

Using the default values from the calculator: you dissolve 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) in enough water to make 250 mL of solution.

Step 1: Convert volume to liters:

V = 250 mL ÷ 1000 = 0.250 L

Step 2: Calculate moles of NaCl:

moles = 2.922 g ÷ 58.44 g/mol = 0.05000 mol

Step 3: Divide moles by volume:

c = 0.05000 mol ÷ 0.250 L = 0.2000 mol/L

The calculator gives 0.2000 mol/L (or 200.0 mM). This is a 0.2 M NaCl solution.

Assumptions

  • The solute is pure and completely dissolves.
  • The final volume is measured after dissolving (volume of solvent plus solute), not the starting solvent volume.
  • Temperature is not considered; molarity changes slightly with temperature because volume changes, but this is negligible for most lab work.

When to Use This Calculation

Use this calculator whenever you need to prepare a solution of known molar concentration from a solid solute. Common situations include:

  • Making buffers for biochemistry or molecular biology (e.g., Tris, PBS).
  • Preparing salt solutions for cell culture or electrophoresis.
  • Diluting a stock solution to a working concentration (first calculate the stock’s molarity, then use the dilution formula).

The result tells you the number of moles of solute per liter of solution. A 1 M solution contains 1 mole (6.022 × 1023 particles) per liter.

Common Mistakes

  • Using solvent volume instead of final volume: If you add 250 mL of water to 2.922 g of NaCl, the final volume will be slightly more than 250 mL. Always dissolve the solute in less water, then bring the volume up to the mark.
  • Forgetting to convert mL to L: A classic error is dividing by 250 instead of 0.250, giving a result 1000× too high.
  • Using the wrong molar mass: For hydrated salts (e.g., MgCl2·6H2O), include the water of hydration in the molar mass.
  • Rounding too early: Round only the final answer, not intermediate steps.

Limits of the Formula

Molarity is a concentration unit that depends on volume, which changes with temperature. For work requiring extreme precision at non-room temperatures, use molality (moles per kg of solvent) instead. Also, the formula assumes the solute does not react with the solvent or change volume significantly upon dissolution—true for most salts and sugars, but not for all (e.g., dissolving concentrated sulfuric acid in water causes volume contraction).

Frequently Asked Questions

What is the difference between molarity and molality?

Molarity (M) is moles of solute per liter of solution; molality (m) is moles of solute per kilogram of solvent. Molality does not change with temperature, while molarity does because liquids expand when heated. For dilute aqueous solutions at room temperature, the numerical values are nearly identical.

How do I make a 1 M solution?

Weigh out 1 mole of the solute (its molar mass in grams), dissolve it in a beaker with less than the final volume of solvent, then transfer to a volumetric flask and add solvent up to the 1 L mark. Mix thoroughly.

Can I use this calculator for any solute?

Yes, as long as you know the molar mass. For ionic compounds like NaCl, the molar mass is the sum of the atomic weights (Na 22.99 + Cl 35.45 = 58.44 g/mol). For acids or bases that dissociate, the molarity refers to the formula unit, not individual ions.

Why does the calculator ask for final volume, not solvent volume?

Because when you dissolve a solid, the total volume changes. If you add 250 mL of water to 2.922 g of NaCl, the final volume is about 251 mL, making the concentration slightly lower than 0.2 M. Using a volumetric flask ensures accuracy.

What if I only have a hydrate, like CuSO4·5H2O?

Include the water molecules in the molar mass. For copper(II) sulfate pentahydrate, the molar mass is 249.69 g/mol (not 159.61 g/mol for anhydrous). If you want a 1 M solution of CuSO4, you weigh 249.69 g of the hydrate.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →