molecalculator

Moles & Molar Mass

Po-209 Isotope Notation: How to Write It

Calculator No. 01-9361 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Polonium-209 in isotope notation is written as 209Po or 20984Po. The mass number (209) goes as a superscript to the left of the element symbol, and the atomic number (84) goes as a subscript to the left if you include it. This notation tells you the isotope has 209 total protons and neutrons, and since polonium always has 84 protons, it has 125 neutrons.

Formula

The isotope notation formula is straightforward: N = A − Z, where:

  • A = mass number (total number of protons + neutrons), unitless
  • Z = atomic number (number of protons), unitless
  • N = neutron number, unitless

For polonium-209, A = 209 and Z = 84, so N = 209 − 84 = 125. The notation is written with the mass number as a superscript and the atomic number as a subscript, both to the left of the element symbol: 20984Po. In many contexts, the atomic number is omitted because the element symbol already implies it, so you may also see simply 209Po.

Worked Example

Using the default values from the calculator (A = 209, Z = 84):

  1. Neutron number: N = 209 − 84 = 125
  2. Isotope notation: 20984Po (or 209Po)

The calculator outputs N = 125 and the notation string “209Po”. This matches the standard notation used in nuclear equations and periodic table entries.

Assumptions

  • The element symbol is fixed as Po (polonium), which always has Z = 84.
  • The mass number is a whole number (integer) for a specific isotope.
  • The notation follows the IUPAC convention: superscript mass number, subscript atomic number, both left of the element symbol.

Why Isotope Notation Matters

Isotope notation is the universal shorthand chemists and physicists use to specify exactly which nuclide they mean. Writing just “polonium” is ambiguous because polonium has 33 known isotopes, ranging from 188Po to 220Po. The notation removes that ambiguity by stating the mass number. For example, 210Po is the famous alpha emitter used in anti-static brushes, while 209Po has a much longer half-life (about 102 years) and is often used as a tracer in experiments. Without the mass number, you wouldn’t know which one you’re talking about.

How to Read the Notation

When you see 20984Po, read it as “polonium-209” or “polonium two hundred nine.” The superscript is the mass number (A), which is the sum of protons and neutrons. The subscript is the atomic number (Z), equal to the number of protons. For a neutral atom, the number of electrons equals Z, so polonium-209 has 84 electrons. The neutron number (N) is not written in the notation but is easily calculated as A − Z.

In nuclear equations, you’ll often see the notation with both numbers, like 20984Po → 20582Pb + 42He, which shows alpha decay. Here, the mass and atomic numbers balance on both sides (209 = 205 + 4, 84 = 82 + 2).

Common Mistakes and Misconceptions

  • Confusing mass number with atomic mass: The mass number is the integer count of nucleons, not the atomic weight (which is a weighted average of isotopes, e.g., 208.98 u for polonium). For a specific isotope, the atomic mass in atomic mass units is close to the mass number but not exactly equal due to binding energy.
  • Putting the numbers on the wrong side: The superscript and subscript go on the left of the element symbol, not the right. Writing Po209 is incorrect in standard notation.
  • Omitting the atomic number when it’s needed: In balanced nuclear equations, you must include Z to verify charge and proton conservation.
  • Assuming all polonium isotopes have the same mass: They don’t; the mass number varies, which is why notation is essential.

How to Choose the Correct Notation for a Given Isotope

To write isotope notation for any element, follow these steps:

  1. Identify the element’s symbol and atomic number (Z) from the periodic table. For polonium, Z = 84.
  2. Determine the mass number (A). This is given in the isotope name (e.g., polonium-209 means A = 209) or can be found from the neutron number if you know it.
  3. Write the element symbol.
  4. Place A as a superscript to the left of the symbol.
  5. Place Z as a subscript to the left of the symbol (optional in casual contexts, but required in nuclear equations).
  6. If you need the neutron number, compute N = A − Z.

For example, to write carbon-14: Z = 6, A = 14, so it’s 146C. To write uranium-235: Z = 92, A = 235, so it’s 23592U.

Frequently Asked Questions

What does the 209 in polonium-209 mean?

The 209 is the mass number (A), which is the total number of protons and neutrons in the nucleus. For polonium-209, there are 84 protons and 125 neutrons, adding up to 209.

Why is polonium-209 written with both a superscript and a subscript?

The superscript (209) gives the mass number, and the subscript (84) gives the atomic number. The subscript is often omitted when the element symbol is enough to identify the element, but including it makes the notation unambiguous and is required in nuclear equations to balance proton numbers.

Is polonium-209 radioactive?

Yes, polonium-209 is radioactive. It decays by alpha emission to lead-205, with a half-life of about 102 years. Because of its relatively long half-life, it is sometimes used as a tracer in scientific research.

How many neutrons does polonium-209 have?

Polonium-209 has 125 neutrons. This is calculated by subtracting the atomic number (84) from the mass number (209): 209 − 84 = 125.

Can I write polonium-209 as just “Po-209”?

Yes, “Po-209” is a common shorthand that is widely understood. It is not the formal isotope notation, but it is acceptable in many contexts, especially in text where superscripts are inconvenient. The formal notation is 209Po or 20984Po.

What is the difference between polonium-209 and polonium-210?

The difference is the number of neutrons. Polonium-209 has 125 neutrons, while polonium-210 has 126. Polonium-210 has a much shorter half-life (about 138 days) and is more intensely radioactive, making it more hazardous. Polonium-209’s longer half-life makes it more useful for laboratory work that requires a stable source over time.

Related

Formula used
in m | Mass number (A) | - | 209 | 0
in z | Atomic number (Z) | - | 84 | 0
out n | Neutron number (N) | - | m - z | 0
out symbol | Isotope notation | - | m + "Po" | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →