This calculator converts a dose of Xanax (alprazolam) to the equivalent dose of Ativan (lorazepam) using the standard benzodiazepine conversion table. You enter the Xanax dose in milligrams, and the calculator returns the approximate Ativan dose, along with the equivalent diazepam (Valium) dose for reference.
Formula
The conversion is based on the widely used benzodiazepine equivalence table, where 0.5 mg of alprazolam (Xanax) is considered approximately equal to 1 mg of lorazepam (Ativan) and 5 mg of diazepam (Valium). Therefore:
Ativan dose (mg) = Xanax dose (mg) × 2
Diazepam dose (mg) = Xanax dose (mg) × 10
These factors come from the standard clinical reference that lists 0.5 mg alprazolam = 1 mg lorazepam = 5 mg diazepam. The calculator uses these ratios directly, assuming a linear relationship, which is the common approach for approximate conversions.
Worked Example
Suppose you take 0.5 mg of Xanax. Using the default values in the calculator:
- Ativan equivalent = 0.5 mg × 2 = 1.00 mg
- Diazepam equivalent = 0.5 mg × 10 = 5.0 mg
So 0.5 mg of Xanax is roughly equivalent to 1 mg of Ativan or 5 mg of Valium. The calculator shows the Ativan result as the primary answer (1.00 mg) and the diazepam value as a secondary reference.
Assumptions
- The conversion uses the standard clinical equivalence table for benzodiazepines.
- The relationship is assumed linear; this is an approximation and may not hold for very high or very low doses.
- Individual patient response, metabolism, and tolerance are not accounted for.
Why This Conversion Matters
Benzodiazepine conversions are needed when a patient is switched from one medication to another, for example, when a drug is not available, when a longer-acting agent is preferred, or when tapering off. Xanax (alprazolam) is a short-acting benzodiazepine with a half-life of about 6–12 hours, while Ativan (lorazepam) has an intermediate half-life of 10–20 hours. Knowing the equivalent dose helps clinicians maintain therapeutic effect while avoiding withdrawal or over-sedation.
However, equivalence tables are rough guides. They are based on the dose that produces the same clinical effect in an average person, but actual potency can vary. For example, a patient who has been on Xanax for years may have developed tolerance, so a direct conversion might not be appropriate. Always consult a healthcare professional for any medication change.
How to Use the Calculator
Enter the Xanax dose in milligrams (e.g., 0.25, 0.5, 1, 2). The calculator will show the equivalent Ativan dose and the diazepam dose. For example:
- 0.25 mg Xanax → 0.5 mg Ativan
- 1 mg Xanax → 2 mg Ativan
- 2 mg Xanax → 4 mg Ativan
Note that the result is a starting point for discussion with a doctor, not a prescription. The calculator does not account for the route of administration (oral vs. sublingual), which can affect bioavailability.
Common Mistakes and Limitations
A frequent error is using the wrong conversion factor. Some tables list 0.5 mg alprazolam = 1 mg lorazepam, but others may use 1 mg alprazolam = 1 mg lorazepam, which is incorrect. Always verify the source. Another mistake is assuming the conversion is exact; in practice, clinicians often adjust doses based on patient response, starting at 50–75% of the calculated equivalent to avoid over-sedation.
The linear model also fails at extremes. For instance, a 10 mg Xanax dose would convert to 20 mg Ativan, which is a very high dose and may be unsafe. The calculator is meant for typical therapeutic doses (0.25–2 mg Xanax). Additionally, the equivalence table is based on oral doses; if switching to intravenous forms, the conversion differs.
Safety and Medical Disclaimer
This calculator is for educational and general reference purposes only. It is not a substitute for professional medical advice, diagnosis, or treatment. Benzodiazepines are controlled substances with risks of dependence, withdrawal, and overdose, especially when combined with alcohol or opioids. Never adjust your medication without consulting a doctor. If you are experiencing withdrawal symptoms or considering stopping a benzodiazepine, seek medical help immediately.
Frequently Asked Questions
Is 1 mg Xanax equal to 1 mg Ativan?
No. The standard equivalence is 0.5 mg Xanax ≈ 1 mg Ativan, so 1 mg Xanax is roughly equal to 2 mg Ativan. Using a 1:1 ratio would underdose the patient.
Why do conversion tables differ?
Different sources use different reference points. The most common table uses diazepam (Valium) as the reference, with 10 mg diazepam = 0.5 mg alprazolam = 1 mg lorazepam. Some tables list a range (e.g., 0.5–1 mg lorazepam for 0.5 mg alprazolam) to account for individual variability.
Can I use this calculator to taper off Xanax?
This calculator only converts between equivalent doses; it does not provide a tapering schedule. Tapering should be done under medical supervision, usually with a long-acting benzodiazepine like diazepam, and the dose is reduced gradually over weeks or months.
What is the half-life of Xanax vs. Ativan?
Xanax has a half-life of about 6–12 hours, while Ativan is about 10–20 hours. This means Ativan stays in the body longer, which can be beneficial for anxiety that lasts all day, but it also takes longer to reach steady state.
Does the calculator work for other benzodiazepines?
No, it only converts Xanax to Ativan. For other conversions (e.g., Klonopin to Valium), you would need a different set of equivalence factors.
Is it safe to switch from Xanax to Ativan on my own?
No. Switching benzodiazepines can cause withdrawal or side effects if done incorrectly. Always consult a doctor who can monitor your response and adjust the dose safely.
Related
Formula used
in x | Xanax dose | mg | 0.5 | 0 out a | Ativan equivalent | mg | x * 2 | 2 out d | Diazepam equivalent | mg | x * 10 | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- H2SO4 Normality to Molarity: How to Convert0.2000 mol/L
- Grams per Liter to Normality: How to Convert0.2000 mol/L
- Does Normality Depend on Temperature? Explained
- Dilution Normality Formula & How to Use It0.2000 mol/L
- Normality vs Molarity: Key Differences Explained0.2000 mol/L
- Normality in Chemistry: Definition & Formula