A 0.1 M solution has a concentration of 0.1 moles of solute per litre of final solution; M means mol/L. This calculator finds the mass of solute needed from its molar mass and the intended final volume, and reports the result in mol/L and mM.
Formula
Molarity is the amount of solute in moles divided by the final solution volume in litres. If the solute amount is given as a mass, convert grams to moles by dividing by molar mass:
C = (m / MM) / (V / 1000)
- C is concentration in mol/L, also written M.
- m is solute mass in grams (g).
- MM is molar mass in grams per mole (g/mol).
- V is final solution volume in millilitres (mL); dividing by 1000 converts it to litres (L).
The second output converts mol/L to millimoles per litre: mM = C × 1000. The calculator’s first output is the concentration determined by the entered values. To make exactly 0.1 M, adjust the mass or volume until that output is 0.1 mol/L. Equivalently, the required mass is m = 0.1 × MM × (V / 1000).
Worked Example
Using the default values—1.461 g solute, molar mass 58.44 g/mol, and 250 mL final volume—first calculate the amount in moles:
n = 1.461 g / 58.44 g/mol = 0.025 g·mol/g = 0.025 mol.
Convert the final volume to litres: 250 mL / 1000 = 0.25 L.
Then calculate molarity: C = 0.025 mol / 0.25 L = 0.1000 mol/L. The concentration in millimolar is 0.1000 × 1000 = 100.00 mM. The calculator displays these as 0.1000 mol/L and 100.00 mM.
Assumptions
- The input mass is the mass of the solute itself, and the molar mass matches the substance and chemical form being used.
- Volume means the final volume of the complete solution, not the amount of solvent added.
- The calculation uses the stated mass and volume; it does not correct for purity, hydration, reaction, evaporation, or measurement uncertainty.
What 0.1 M Means
The symbol M denotes molarity, or amount concentration: moles of dissolved solute per litre of solution. Thus, 0.1 M is another way of writing 0.1 mol/L. It is not 0.1 grams per litre, and it does not mean that 0.1 mole is present regardless of the volume.
For example, 1 L of a 0.1 M solution contains 0.1 mol of solute; 250 mL contains 0.025 mol; and 100 mL contains 0.010 mol. These amounts follow from n = C × V, provided volume is expressed in litres. A millimolar value is often convenient for smaller concentrations: 0.1 M equals 100 mM, because 1 mol equals 1000 mmol.
Molarity describes the final solution, including both solute and solvent. Dissolving a measured amount in a solvent and then bringing the mixture to a final volume is conceptually different from adding that amount to the full stated volume of solvent. The latter can produce a final solution volume larger than intended.
How to Use the Calculator
- Enter the solute mass in grams. Use the mass of the chemical form named in your calculation, not a volume or a mass that includes an unaccounted-for mixture.
- Enter its molar mass in g/mol. For a pure compound, calculate this from its formula and standard atomic weights, or use a reliable reference for the exact form, including any water of crystallization.
- Enter the intended final solution volume in mL. The calculator converts it to litres by dividing by 1000.
- Read the result in mol/L and mM. For a target of 0.1 M, compare the mol/L result with 0.1; a displayed value may be rounded, so retain appropriate precision in the inputs.
To calculate the mass directly for a 0.1 M target, use m = C × MM × V, with C in mol/L, MM in g/mol, and V in litres. For instance, 0.1 M × 58.44 g/mol × 0.25 L = 1.461 g. This example is a unit-based calculation, not a universal mass for every substance or volume.
Choosing the Correct Molar Mass and Volume
A compound’s molar mass comes from its chemical formula and the atomic weights of its constituent atoms. For a substance with a formula that includes water, such as a hydrate, include those water molecules if the weighed material is the hydrate. Using the anhydrous molar mass for a hydrated solid gives the wrong number of moles per gram. Likewise, salts and compounds with different formula units must be treated according to the actual substance specified.
Use the final volume after the solute is dissolved and the solution has been brought to its intended volume. In careful volumetric preparation, temperature matters because liquid volumes change with temperature; follow the conditions and tolerances stated by the method. The calculator assumes the entered volume is already the appropriate final volume and does not model thermal expansion.
Common Mistakes and Limits
- Confusing M with mass concentration: 0.1 M means 0.1 mol/L. To express it in g/L, multiply by molar mass; for a 58.44 g/mol compound, 0.1 M corresponds to 5.844 g/L.
- Entering solvent volume instead of final volume: the denominator is the volume of the completed solution.
- Mixing units: this calculator expects grams, g/mol, and mL. Its formula converts mL to L explicitly.
- Ignoring chemical form or purity: a hydrate, salt, or impure material may not provide the same amount of the intended solute per gram as an anhydrous pure compound.
- Over-interpreting precision: extra calculator digits do not make measurements more accurate. Round the reported value to reflect the precision of the mass, molar mass, and volume data.
Molarity is defined using solution volume, which can vary with temperature. For concentrated or non-ideal mixtures, other concentration measures, such as molality (moles per kilogram of solvent), may be more suitable for some comparisons. The calculator performs straightforward arithmetic; it does not predict solubility, chemical reactions, dissociation, or activity. Where bench work is implied, follow your lab method, the safety data sheet (SDS) and your supervisor.
Frequently Asked Questions
How many moles are in 100 mL of a 0.1 M solution?
Convert 100 mL to 0.100 L, then use n = C × V: 0.1 mol/L × 0.100 L = 0.010 mol.
Is 0.1 M the same as 0.1 mol/L?
Yes. M is the conventional symbol for molarity, expressed in moles per litre.
How do I make a 0.1 M solution from a solid?
Calculate the required mass with m = 0.1 × MM × final volume in litres. The calculator can check the concentration from mass, molar mass, and final volume; practical preparation must follow the relevant lab method and safety guidance.
How many grams per litre is 0.1 M?
Multiply 0.1 mol/L by the compound’s molar mass in g/mol. The answer depends on the compound: for a molar mass of 58.44 g/mol, it is 5.844 g/L.
What is the difference between 0.1 M and 100 mM?
There is no difference in concentration. Since 1 M equals 1000 mM, 0.1 M equals 100 mM.
Related
Formula used
in m | Mass of solute | g | 1.461 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Cubic Meters per Second to Litres per Second1,000.000 L/s
- Cubic Meters to Liters per Second Calculator10.00 L/s
- Cubic Meters to Liters: Symbol and Conversion1,000 L
- Cubic Meters per Liter: Conversion and Calculator0.001000 m³
- Cubic Meters to Liters Formula and Calculator1,000 L
- Cubic Meter to Megaliter Converter and Formula1.000 ML