molecalculator

Moles & Molar Mass

1 atm to bar: Conversion, Formula, and Calculator

Calculator No. 01-1059 · Updated · Formula and assumptions shown below

Pressure 1.01325 bar
Pressure
1 atm
Set in the form below
You enter
Pressure (atm)
You get
Pressure (bar)
Rounding
5 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator converts pressure from standard atmospheres (atm) to bar: enter a pressure in atm to get its equivalent in bar. It is for students, lab planning, and anyone comparing pressure values across units; the result uses the exact conversion factor between the defined units.

Formula

Pressure in bar equals pressure in atmospheres multiplied by 1.01325 bar per atm:

pbar = patm × 1.01325

Here, patm is the entered pressure in standard atmospheres (atm), and pbar is the converted pressure in bar. The factor 1.01325 is exact: one standard atmosphere is defined as 101,325 pascals, and one bar is defined as 100,000 pascals, so 101,325 ÷ 100,000 = 1.01325. The conversion does not depend on temperature or the gas involved.

Worked Example

Using the calculator’s default input of 1 atm:

pbar = 1 atm × 1.01325 bar/atm

pbar = 1.01325 bar

The units cancel because the input is in atm and the conversion factor is in bar per atm. The calculator displays five decimal places; for a quick estimate, 1 atm is approximately 1.013 bar.

Assumptions

  • The input is a pressure expressed in standard atmospheres, not a different unit informally called an atmosphere.
  • The conversion is an exact unit conversion; it makes no assumptions about a gas, sample, temperature, or measurement method.
  • The result is rounded to five decimal places for display.

1. Standard atmosphere to bar

The standard atmosphere is a defined pressure unit, abbreviated atm. One standard atmosphere equals 101,325 Pa, or 1.01325 bar. This is the direct answer for the common query “1 atm to bar,” and it is useful when a textbook, lab calculation, or reference table gives pressure in atmospheres while another source uses bar.

Keep the exact value when accuracy matters: 1 atm is not exactly 1 bar. The difference is 0.01325 bar, about 1.3% of a bar. In many everyday explanations people treat the units as close, but that shortcut can introduce an avoidable error in calculations or when comparing precise specifications.

2. Converting any atm value to bar

For any input, multiply the atm value by 1.01325. For example, 2 atm × 1.01325 = 2.0265 bar, while 0.5 atm × 1.01325 = 0.506625 bar. The same multiplication works for small and large values, provided the input is genuinely in standard atmospheres.

To convert in the opposite direction, divide bar by 1.01325. That reverse operation is not the calculator’s output, but it helps check a conversion: 2.0265 bar ÷ 1.01325 = 2 atm. Do not multiply by the factor in both directions; that would move farther from the original value.

3. What bar means

The bar is a metric pressure unit defined as exactly 100,000 pascals. It is close to, but not identical to, the SI derived unit pascal: 1 bar = 100,000 Pa. Since an atmosphere is 101,325 Pa, an atmosphere is slightly larger than a bar.

Bar is common in technical specifications and pressure measurements, while pascals and kilopascals are used throughout SI-based science and engineering. To convert bar to kPa, multiply by 100; thus 1.01325 bar equals 101.325 kPa. That relationship is also a useful independent check on the atm-to-bar result.

4. Absolute pressure versus gauge pressure

The unit conversion does not tell you whether a pressure is absolute or gauge pressure. Absolute pressure is measured from a perfect vacuum; gauge pressure is measured relative to the local surrounding atmosphere. A gauge reading of 0 bar does not mean there is no pressure: it means the pressure matches the local reference pressure.

Before converting a value from an instrument or specification, check which pressure convention it uses. For example, converting a gauge pressure of 1 bar gives 1.01325 bar as a numerical unit conversion, but it remains a gauge-pressure value. It should not be treated as 1.01325 bar absolute unless the reference pressure has been accounted for.

5. Rounding and significant figures

The conversion factor is exact, but a measured input may not be. If a pressure is reported as 1 atm with one significant figure, reporting 1.01325 bar may imply more measurement precision than the original value supports. Keep extra digits during intermediate calculations, then round the final answer to suit the precision of the input or the requirements of your work.

For rough mental conversion, multiplying atm by 1.013 is usually sufficient. For formal calculations, use 1.01325 rather than 1.01 or 1, and state the units. A calculator’s five-decimal display is a formatting choice, not a claim that every input was measured to that precision.

How to Choose

For a straightforward unit conversion, use the exact factor 1.01325 and confirm that the starting value is in standard atm. If your source gives kPa, Pa, or bar already, convert from that stated unit instead of assuming it means atm; 101.325 kPa equals 1 atm, whereas 100 kPa equals 1 bar.

Next, identify whether the pressure is absolute or gauge pressure. The arithmetic factor stays the same, but the reference point changes what the number means. Finally, choose a sensible number of significant figures based on the measurement and intended use, and retain unrounded values until the end of a multi-step calculation.

Frequently Asked Questions

How many bar is 1 atm?
1 standard atmosphere equals exactly 1.01325 bar.

Is 1 atm the same as 1 bar?
No. One atm is 1.01325 bar, so it is 1.325% greater than 1 bar.

How do I convert atm to bar?
Multiply the pressure in atm by 1.01325. For example, 3 atm is 3.03975 bar.

How do I convert bar to atm?
Divide the pressure in bar by 1.01325. For instance, 2 bar is approximately 1.97385 atm.

Is the conversion affected by temperature?
No. It is a conversion between defined pressure units, not a gas-law calculation. Temperature may affect a physical system’s pressure, but not the unit conversion factor.

Does this convert gauge pressure to absolute pressure?
No. It only changes the unit. To obtain absolute pressure from gauge pressure, the relevant local atmospheric reference pressure must also be known and added.

Final Thoughts

For standard pressure units, the conversion is direct: multiply atm by 1.01325 to obtain bar. Check the pressure reference (absolute or gauge) and round the result to match the precision of the original value.

Related

Formula used
in atm | Pressure | atm | 1 | 0
out bar | Pressure | bar | atm * 1.01325 | 5

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →