molecalculator

Moles & Molar Mass

Atomic Mass of Magnesium Sulfate: Formula and Calculation

Calculator No. 01-6624 · Updated · Formula and assumptions shown below

Formula mass 120.36 u
Molar mass
120.36 g/mol
= Formula mass
Magnesium atoms
1 count
Set in the form below
Sulfur atoms
1 count
Set in the form below
You enter
Magnesium atoms (count), Sulfur atoms (count), Oxygen atoms (count)
You get
Formula mass (u), Molar mass (g/mol)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The atomic mass of magnesium sulfate depends on which form you mean: anhydrous magnesium sulfate, MgSO4, has a formula mass of about 120.36 u, equivalent to a molar mass of 120.36 g/mol. The calculator below adds the standard atomic weights for the atoms in MgSO4; enter the number of magnesium, sulfur, and oxygen atoms to obtain the formula mass in atomic mass units.

Formula

Formula mass is the sum of each element’s standard atomic weight multiplied by the number of its atoms in the formula:

Formula mass (u) = nMg × 24.305 + nS × 32.06 + nO × 15.999

Here, nMg, nS, and nO are atom counts (dimensionless); the atomic weights are in unified atomic mass units per atom. For magnesium sulfate, those counts are 1, 1, and 4. The numerical value is also the molar mass in g/mol: one mole of MgSO4 has a mass of about 120.36 g. This numerical correspondence follows from the definitions of the atomic mass unit and the mole; the units themselves are different.

Worked Example

Using the calculator’s default atom counts and IUPAC abridged standard atomic weights:

  1. Magnesium contribution: 1 × 24.305 u = 24.305 u.
  2. Sulfur contribution: 1 × 32.06 u = 32.06 u.
  3. Oxygen contribution: 4 × 15.999 u = 63.996 u.
  4. Add the contributions: 24.305 + 32.06 + 63.996 = 120.361 u.

Rounded to the calculator’s two decimal places, the formula mass is 120.36 u, and the corresponding molar mass is 120.36 g/mol.

Assumptions

  • The formula is anhydrous magnesium sulfate, MgSO4, with no waters of crystallization.
  • Atomic weights use the stated abridged conventional values; actual isotopic composition can cause small variation.
  • The displayed result is rounded to two decimal places; calculations retain the input atomic-weight values before rounding.

What “Atomic Mass” Means Here

Strictly speaking, atomic mass refers to the mass of an individual atom, while MgSO4 is a compound made of several atoms. Its 120.36 u value is therefore called a formula mass, rather than a molecular mass in the strict sense. Magnesium sulfate is an ionic compound, so it is described by a repeating formula unit, MgSO4, not by separate MgSO4 molecules in a crystal.

In everyday chemistry questions, “atomic mass of magnesium sulfate” commonly means the total mass for the formula unit or its equivalent molar mass. The answer is 120.36 u per formula unit, or 120.36 g/mol. The calculator reports both labels because the numerical value is the same while the units and scale differ.

Why Hydrated Magnesium Sulfate Has a Different Mass

Magnesium sulfate is also found as hydrates, whose crystal formulas include water. The familiar Epsom salt is magnesium sulfate heptahydrate, MgSO4·7H2O. It has seven additional water molecules per formula unit, so its formula mass is much larger than the anhydrous compound’s.

Using the same atomic weights, a water molecule contributes 2(1.008) + 15.999 = 18.015 u. Seven water molecules contribute 7 × 18.015 = 126.105 u. Thus MgSO4·7H2O is about 120.361 + 126.105 = 246.466 u, or approximately 246.47 g/mol. This is a different chemical formula, not a discrepancy in the anhydrous value. Other hydrate forms have their own water counts and corresponding masses.

The calculator is deliberately set up for MgSO4, not the heptahydrate. To calculate another formula, enter its atom counts. For a hydrate, include the atoms in the waters as part of the totals: MgSO4·7H2O contains Mg1S1O11H14. Since this calculator has only Mg, S, and O inputs, it cannot calculate that hydrate directly; hydrogen must also be included in the formula sum.

Using the Value in Chemistry

Molar mass converts between a substance’s mass and amount in moles. For anhydrous magnesium sulfate, divide the sample mass in grams by 120.36 g/mol to find the number of moles. Conversely, multiply moles by 120.36 g/mol to find the corresponding mass. For example, 12.036 g of pure anhydrous MgSO4 corresponds to 0.1000 mol, since 12.036 ÷ 120.36 = 0.1000.

This conversion assumes the sample is actually anhydrous MgSO4 and sufficiently pure for the calculation. A hydrated solid has a different molar mass, and a sample that contains moisture or impurities will not behave as though all its measured mass were anhydrous MgSO4. For bench work, follow your lab method, the safety data sheet (SDS) and your supervisor.

Common Confusions and Limits

  • Confusing u with g/mol: Both results show 120.36 numerically, but formula mass describes one formula unit on the atomic scale, whereas molar mass describes one mole of formula units.
  • Leaving out waters of crystallization: MgSO4 and MgSO4·7H2O have different formula masses. Check the complete formula on the label or in the problem.
  • Calling it a molecular mass: For this ionic solid, “formula mass” is the more precise term.
  • Expecting unlimited precision: Standard atomic weights are conventional values, and natural isotopic abundances vary. A result rounded to 0.01 is appropriate for many routine calculations, but may not suit work requiring higher precision.

The calculator’s result is a composition-based calculation; it does not identify which hydrate or material is in a container, assess purity, or account for sample-specific isotope composition. Choose the formula that matches the actual substance before using its molar mass.

Frequently Asked Questions

What is the molar mass of magnesium sulfate?
For anhydrous MgSO4, it is about 120.36 g/mol, using Mg = 24.305, S = 32.06, and O = 15.999.

Is magnesium sulfate 120 or 120.36 g/mol?
Both can be reasonable depending on rounding. The more precise result from the stated standard atomic weights is 120.361 g/mol, commonly rounded to 120.36 g/mol or, to three significant figures, 120 g/mol.

What is the formula mass of Epsom salt?
Epsom salt is magnesium sulfate heptahydrate, MgSO4·7H2O. Its formula mass is approximately 246.47 u, corresponding to 246.47 g/mol.

Why are formula mass and molar mass numerically equal?
The atomic mass unit and the mole are defined so that a substance’s mass per formula unit in u has the same numerical value as its mass per mole in g/mol. They remain different quantities with different units.

Is MgSO4 a molecule?
It is an ionic compound. MgSO4 represents the simplest formula-unit ratio in the solid, rather than a discrete molecule.

Related

Formula used
in mg | Magnesium atoms | count | 1 | 0
in s | Sulfur atoms | count | 1 | 0
in o | Oxygen atoms | count | 4 | 0
out fm | Formula mass | u | mg * 24.305 + s * 32.06 + o * 15.999 | 2
out mm | Molar mass | g/mol | fm | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →