Atomic number 44 is ruthenium (Ru), and its full electron configuration is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d7 5s1. In condensed form, this is written [Kr] 4d7 5s1. The unusual 4d7 5s1 arrangement, rather than the expected 4d8 5s2, arises because a half-filled 5s subshell and a nearly filled 4d subshell lower the total energy of the atom.
Understanding Electron Configurations
An electron configuration is a shorthand notation that shows how electrons are distributed among the atomic orbitals of an atom. For a neutral atom, the number of electrons equals the atomic number. Ruthenium has 44 electrons. These electrons fill orbitals in order of increasing energy, following the Aufbau principle, Hund’s rule, and the Pauli exclusion principle.
The order of filling is determined by the (n + l) rule: orbitals with lower (n + l) values fill first, and when two orbitals have the same (n + l), the one with lower n fills first. The sequence is: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p. For ruthenium, the first 36 electrons fill up to krypton’s configuration ([Kr]), and the remaining 8 electrons go into the 4d and 5s orbitals.
Why Ruthenium Has 4d7 5s1 Instead of 4d8 5s2
You might expect ruthenium to follow the pattern of its neighbors: iron ([Ar] 3d6 4s2), osmium ([Xe] 4f14 5d6 6s2), and even technetium ([Kr] 4d5 5s2). However, ruthenium deviates. The reason is that the 4d and 5s orbitals are very close in energy. For ruthenium, the energy cost of pairing two electrons in the 5s orbital is slightly higher than promoting one 5s electron to the 4d orbital. This gives a configuration with a half-filled 5s (one electron) and a 4d subshell that is one electron short of half-filled (seven electrons). The exchange energy gained by having more unpaired electrons (seven in 4d, one in 5s) outweighs the small energy difference between the orbitals.
This is a classic example of a transition metal exception. Other notable exceptions include chromium ([Ar] 3d5 4s1) and copper ([Ar] 3d10 4s1). The rule of thumb is that half-filled and fully filled d subshells are especially stable, but ruthenium’s case shows that even a nearly half-filled d subshell can be favored.
How to Write the Configuration Step by Step
If you’re working from scratch, follow these steps:
- Identify the atomic number: 44.
- Fill orbitals in order of increasing energy until you’ve placed all 44 electrons.
- Write the full configuration: 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d7 5s1.
- Check the total: 2+2+6+2+6+10+2+6+7+1 = 44.
- For the condensed form, find the previous noble gas: krypton (atomic number 36). Replace its full configuration with [Kr].
- Write [Kr] 4d7 5s1.
Note that in the condensed form, the 4d comes before 5s even though 5s fills first. This is a common convention for transition metals, because the 4d electrons are the valence electrons that participate in bonding, while the 5s electron is often lost first when forming ions.
Electron Configuration of Ruthenium Ions
When ruthenium forms ions, electrons are removed from the orbital with the highest principal quantum number (n) first. For ruthenium, that means the 5s electron is removed before the 4d electrons.
- Ru+: [Kr] 4d7 (remove the 5s1)
- Ru2+: [Kr] 4d6 (remove 5s1 and one 4d)
- Ru3+: [Kr] 4d5 (remove 5s1 and two 4d)
Common oxidation states of ruthenium include +2, +3, and +4, with +8 also known in ruthenium tetroxide (RuO4). In the +8 state, all eight valence electrons (4d75s1) are removed, leaving a [Kr] core.
Why It Matters: Ruthenium’s Chemistry
The electron configuration explains many of ruthenium’s chemical properties. With seven 4d electrons, ruthenium can lose up to eight electrons to achieve a noble-gas configuration, which is why it forms RuO4, a volatile and powerful oxidizing agent. The 4d orbitals are more diffuse than 3d orbitals, so ruthenium compounds often have different magnetic and catalytic properties compared to iron (its lighter congener).
Ruthenium is a hard, silvery-white metal that is highly corrosion-resistant. It is used in electrical contacts, thick-film resistors, and as a catalyst in various industrial processes, including the production of ammonia and the hydrogenation of organic compounds. It is also a key component in some platinum alloys and in the anodes of chlor-alkali cells.
Common Misconceptions
One common mistake is assuming that the 4d subshell fills before the 5s because of the order in the periodic table. In reality, 5s fills first for the elements K and Ca, and then 4d begins to fill. For ruthenium, the 5s is only partially filled (one electron) because of the stability of the 4d7 arrangement.
Another misconception is that the condensed configuration should be written as [Kr] 5s1 4d7. While that order reflects the filling order, the standard convention is to list the d orbitals before the s orbitals that come after the noble gas core. This is because the d electrons are considered part of the valence shell for transition metals, and listing them first makes the electron count for the valence shell clearer.
Also, don’t confuse ruthenium (Ru, Z=44) with rhodium (Rh, Z=45) or rhenium (Re, Z=75). Rhenium is in group 7, period 6, and has the configuration [Xe] 4f14 5d5 6s2. Ruthenium is in group 8, period 5.
Frequently Asked Questions
What is the electron configuration of ruthenium in shorthand?
The shorthand (condensed) configuration is [Kr] 4d7 5s1. This means that the core electrons are the same as krypton (atomic number 36), and the remaining eight electrons are distributed as seven in the 4d subshell and one in the 5s subshell.
Why is ruthenium’s configuration an exception to the Aufbau principle?
The Aufbau principle predicts 4d8 5s2, but the actual configuration is 4d7 5s1. This happens because the energy difference between the 4d and 5s orbitals is very small, and the electron repulsion in the 5s orbital is slightly higher than the energy gain from pairing. Having seven unpaired d electrons (instead of six) lowers the total energy through exchange energy, making the exception more stable.
How many unpaired electrons does ruthenium have?
In its ground state, ruthenium has eight unpaired electrons: seven in the 4d subshell and one in the 5s subshell. This is because each orbital in the 4d subshell is singly occupied before any pairing occurs (Hund’s rule), and the 5s orbital has a single electron as well.
What is the electron configuration of Ru3+?
Ru3+ has lost three electrons: first the 5s1, then two from the 4d. The configuration is [Kr] 4d5. This ion has five unpaired electrons and is often found in octahedral complexes with a high-spin configuration.
Is ruthenium a transition metal?
Yes, ruthenium is a transition metal. It is in group 8, period 5 of the periodic table. Transition metals are defined by having an incomplete d subshell in at least one of their common oxidation states. Ruthenium fits this definition because its neutral atom has a partially filled 4d subshell (4d7), and its ions also have incomplete d subshells.
What is the difference between ruthenium and rhodium configurations?
Rhodium (atomic number 45) has one more electron than ruthenium. Its configuration is [Kr] 4d8 5s1. The extra electron goes into the 4d subshell, making it 4d8 rather than 4d7. Rhodium also shows an exception to the Aufbau principle, but with a different balance between 4d and 5s electrons.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works