The atomic number for yttrium (symbol Y) is 39. This means every neutral yttrium atom contains 39 protons in its nucleus and, in its elemental state, 39 electrons surrounding it. The number 39 is the fundamental identity of yttrium on the periodic table, distinguishing it from every other element.
Formula
The calculator above is a general molarity calculator, not specific to yttrium, but it uses the same logic you would apply to any yttrium salt. The formula is:
Molarity (mol/L) = mass of solute (g) ÷ molar mass (g/mol) ÷ volume of solution (L)
Where:
- m = mass of the solute in grams (g)
- mm = molar mass of the solute in grams per mole (g/mol)
- v = final solution volume in milliliters (mL), converted to liters by dividing by 1000
- c = molarity in moles per liter (mol/L), often written as M
Worked Example
Using the default values from the calculator block, suppose you dissolve 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) in water and dilute to a final volume of 250 mL.
Step 1: Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
Step 2: Calculate moles of NaCl: 2.922 g ÷ 58.44 g/mol = 0.05000 mol
Step 3: Calculate molarity: 0.05000 mol ÷ 0.250 L = 0.2000 mol/L
The calculator gives 0.2000 mol/L (or 200.0 mM), matching the step-by-step result. For yttrium specifically, if you wanted a 0.1 M solution of yttrium chloride (YCl₃, molar mass 195.26 g/mol) in 500 mL, you would need 0.1 × 0.5 × 195.26 = 9.763 g of YCl₃.
Assumptions
- The solute is pure and dry; hydrated salts (e.g., YCl₃·6H₂O) have a different molar mass.
- The volume is the final solution volume after mixing, not the volume of solvent added.
- Temperature is near 25 °C; molarity changes slightly with thermal expansion of the solvent.
- Complete dissolution is assumed; no undissolved solid remains.
Where Yttrium Sits on the Periodic Table
Yttrium is a transition metal in period 5, group 3. It sits directly above the lanthanides (the 15 elements from lanthanum to lutetium) and is often grouped with them as a “rare earth element” because it occurs in the same ores and shares similar chemical behavior. Its electron configuration is [Kr] 4d¹ 5s². The 39 protons define its atomic number, but its chemistry is driven by the single 4d electron and the two 5s electrons, which it readily loses to form a stable Y³⁺ ion. This trivalent state is nearly universal in yttrium compounds, from yttrium oxide (Y₂O₃) to yttrium aluminum garnet (Y₃Al₅O₁₂, or YAG).
How the Atomic Number Is Determined
The atomic number is not a measured property like mass; it is a count. It was established by Henry Moseley in 1913, who showed that the square root of the frequency of an element’s X-ray emission lines increases linearly with atomic number. This discovery resolved the earlier ordering by atomic weight, which had placed yttrium (atomic mass ~88.9) after rubidium (85.5) and strontium (87.6) but before zirconium (91.2), correctly matching the periodic patterns. Today, the atomic number is confirmed directly by the charge of the nucleus: the number of protons equals the number of positive charges, which equals the atomic number. For yttrium, that is 39.
Isotopes and the Mass Number
Atomic number (39) is different from mass number, which counts protons plus neutrons. Yttrium has only one naturally occurring stable isotope, yttrium-89 (39 protons + 50 neutrons). This makes its standard atomic weight, 88.906 g/mol, essentially the mass of that single isotope. There are about three dozen synthetic radioisotopes, the most useful being yttrium-90, which decays by beta emission with a half-life of 64.1 hours. Yttrium-90 is produced by the decay of strontium-90 and is used in radiation therapy for liver tumors and in certain targeted cancer treatments because its beta particles penetrate tissue to a limited depth, sparing surrounding healthy cells.
Common Misconception: Y vs. Yb
A frequent confusion is between yttrium (Y, atomic number 39) and ytterbium (Yb, atomic number 70). Both are rare earth metals, both were discovered in the same Swedish quarry near Ytterby, and both share the element’s namesake. The difference in atomic number means yttrium has 31 fewer protons, and their chemistries differ noticeably: yttrium is lighter, less dense (4.47 g/cm³ vs. 6.90 g/cm³), and forms a more stable oxide layer. When reading a periodic table or a chemical formula, check the symbol carefully—Y is yttrium, Yb is ytterbium, and they are not interchangeable in reactions or calculations.
Practical Uses That Depend on Atomic Number 39
Because yttrium has 39 electrons, its X-ray absorption edge and optical properties are specific to that electron count. This makes it useful in several technologies:
- YAG lasers: Neodymium-doped YAG (Nd:YAG) crystals emit infrared light at 1064 nm, used in cutting, welding, and medical procedures.
- LED phosphors: Europium-doped yttrium oxide (Y₂O₃:Eu³⁺) produces red light in fluorescent lamps and white LEDs.
- Superconductors: Yttrium barium copper oxide (YBCO, YBa₂Cu₃O₇) becomes superconducting above 90 K, above the boiling point of liquid nitrogen (−196 °C), making it practical for MRI magnets and power cables.
- Alloys: Adding yttrium to aluminum or magnesium alloys improves high-temperature strength and oxidation resistance, used in jet engine components.
- Ceramics: Yttria-stabilized zirconia (YSZ) is a tough ceramic used in dental crowns and as an electrolyte in solid oxide fuel cells.
Frequently Asked Questions
Is yttrium a rare earth element? Yes, geochemically it is classified as a rare earth, even though it is not a lanthanide. It is actually more abundant in Earth’s crust (about 33 ppm) than lead (14 ppm), but it is called “rare” because it is dispersed and hard to mine in concentrated deposits.
What is the difference between atomic number and atomic mass for yttrium? Atomic number is 39 (protons only). Atomic mass is about 88.91 g/mol (protons + neutrons). The difference, about 50, is the neutron count in the stable isotope yttrium-89. Atomic number determines the element; atomic mass varies with isotopes.
Why does yttrium always form a +3 ion? Yttrium has three valence electrons (two in 5s and one in 4d). Losing all three gives a stable noble-gas-like configuration (that of krypton). The +3 ion is highly stable, and yttrium almost never shows other oxidation states in aqueous chemistry.
Can yttrium be used in medical imaging? Yes, but not as a contrast agent. The radioisotope yttrium-90 is used therapeutically (to kill cancer cells), while the positron emitter yttrium-86 (half-life 14.7 h) is used in PET imaging to track the distribution of yttrium-labeled drugs. The stable yttrium-89 itself is not radioactive and has no imaging role.
Is yttrium toxic? Yttrium compounds are generally of low toxicity, but soluble salts like yttrium chloride can irritate skin and eyes. Inhalation of yttrium dust can cause lung irritation. It is not a cumulative poison like lead or mercury, but standard lab hygiene—gloves, eye protection, and avoiding dust inhalation—is recommended. Follow your lab method, the safety data sheet (SDS) and your supervisor.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works