molecalculator

Moles & Molar Mass

Bi Electron Configuration: Full Shells & Notation

Calculator No. 01-9477 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The electron configuration of bismuth (Bi, element 83) is [Xe] 4f14 5d10 6s2 6p3. This means bismuth has 83 electrons arranged in shells around the nucleus, with the outermost shell (n=6) containing 5 electrons (2 in 6s and 3 in 6p).

Formula

The electron configuration is built by filling atomic orbitals in order of increasing energy, following the Aufbau principle. The order is: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p. Each orbital holds a maximum number of electrons: s holds 2, p holds 6, d holds 10, f holds 14. The total number of electrons equals the atomic number Z (for a neutral atom). For bismuth, Z = 83, so the sum of all superscripts must equal 83.

Worked Example

Using the default Z = 83:

  1. Fill 1s2 (2 electrons), 2s2 (2), 2p6 (6), 3s2 (2), 3p6 (6), 4s2 (2), 3d10 (10), 4p6 (6), 5s2 (2), 4d10 (10), 5p6 (6). This gives 54 electrons, which is the noble gas xenon (Xe) core.
  2. Add 6s2 (2 electrons) → 56 electrons.
  3. Add 4f14 (14 electrons) → 70 electrons.
  4. Add 5d10 (10 electrons) → 80 electrons.
  5. Add 6p3 (3 electrons) → 83 electrons.

The full configuration is [Xe] 4f14 5d10 6s2 6p3. The valence electrons are those in the highest principal quantum level (n=6): 6s2 6p3 = 5 valence electrons.

Assumptions

  • The atom is neutral (number of electrons = atomic number).
  • The Aufbau principle applies (orbitals fill in order of increasing energy).
  • For bismuth, the 4f and 5d orbitals are completely filled before the 6p orbitals, which is the experimentally observed ground state.

How to Read the Configuration

Each part of the notation tells you something:

  • [Xe] is the shorthand for the 54 electrons that match xenon, a noble gas. Using a noble gas core shortens the notation and highlights the outer electrons.
  • 4f14 means the 4f subshell is full (14 electrons). For bismuth, this is a core-like level, but it is written explicitly because it is part of the 4th principal shell.
  • 5d10 – the 5d subshell is full (10 electrons).
  • 6s2 – two electrons in the 6s orbital.
  • 6p3 – three electrons in the 6p orbitals. This is the highest-energy occupied subshell.

The superscripts add up: 54 + 14 + 10 + 2 + 3 = 83. The valence electrons are the ones in the outermost shell (n=6), which are the 6s2 and 6p3 electrons – five in total. These five electrons determine bismuth’s chemical behavior, such as its common +3 and +5 oxidation states.

Why Bismuth’s Configuration Looks Unusual

You might expect bismuth to follow the pattern of the lighter pnictogens (nitrogen, phosphorus, arsenic, antimony), which have an outer s2p3 configuration. Bismuth does have that, but the presence of the filled 4f and 5d subshells adds a lot of electrons deep inside. The 4f subshell is filled after 6s, which is why the order is 6s → 4f → 5d → 6p. This is a consequence of the relative energies of these orbitals; the 4f orbitals are lower in energy than the 5d and 6p orbitals for bismuth. This is a common source of confusion when writing configurations for heavy elements.

Common Mistakes

  • Forgetting the 4f and 5d electrons: Some abbreviated configurations skip them, but that would be incorrect – they are part of the electron arrangement.
  • Writing 6p5 instead of 6p3: Bismuth has 5 valence electrons, not 7. The 6p subshell holds a maximum of 6, but bismuth has only 3.
  • Confusing the order of filling: The 4f is filled after 6s, not after 5d. The correct sequence for bismuth is 6s → 4f → 5d → 6p.
  • Using the wrong noble gas core: The core is [Xe] (Z=54), not [Kr] (Z=36) or [Rn] (Z=86).

How to Choose the Correct Configuration

To write any electron configuration, follow these steps:

  1. Find the atomic number from the periodic table (for bismuth, Z=83).
  2. Use the Aufbau order to fill orbitals, one electron at a time, until you reach 83 electrons.
  3. Stop when you have placed all electrons. The last subshell you fill is the highest-energy occupied one.
  4. For shorthand, replace the filled inner orbitals with the nearest noble gas symbol in brackets.

For bismuth, the nearest noble gas before it is xenon (Z=54). After that, you add the remaining 29 electrons in the order 6s, 4f, 5d, 6p.

Bismuth’s Valence Electrons and Chemical Behavior

The five valence electrons (6s2 6p3) explain bismuth’s position in Group 15. Like nitrogen and phosphorus, bismuth can form compounds in the +3 and +5 oxidation states. However, due to the inert pair effect – the reluctance of the 6s2 electrons to participate in bonding – bismuth’s +3 state is more common and more stable than its +5 state. For example, bismuth(III) oxide (Bi2O3) is a common compound, while bismuth(V) compounds are strong oxidizers. This is a direct consequence of the electron configuration: the 6s electrons are tightly held and less available for bonding.

Frequently Asked Questions

What is the full electron configuration of bismuth?
The full configuration is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 4f14 5d10 6s2 6p3. The shorthand is [Xe] 4f14 5d10 6s2 6p3.

How many valence electrons does bismuth have?
Bismuth has 5 valence electrons – 2 in the 6s orbital and 3 in the 6p orbitals. These are the electrons in the outermost shell (n=6) that participate in chemical bonding.

Is bismuth a transition metal?
No, bismuth is a post-transition metal (or p-block metal). Its highest-energy electrons are in the 6p subshell, not a d subshell. Even though it has a filled 5d subshell, that is not the outermost shell.

Why does bismuth often have a +3 oxidation state instead of +5?
Because of the inert pair effect: the 6s2 electrons are relatively stable and less likely to be removed or shared. So bismuth commonly loses only the three 6p electrons, giving +3, rather than all five valence electrons.

Does bismuth have an exception to the Aufbau principle?
Bismuth does not have an exception – it follows the standard filling order. However, the order for heavy elements like bismuth includes the 4f and 5d subshells, which are filled after 6s, which can seem counterintuitive if you only look at the principal quantum number.

What is the electron configuration of Bi3+?
For Bi3+, you remove three electrons from the highest-energy orbitals, which are the 6p electrons. The configuration becomes [Xe] 4f14 5d10 6s2.

Related

Formula used
in z | Atomic number Z | - | 83 | 0 | 118
out config | Electron configuration | - | "[Xe] 4f14 5d10 6s2 6p3" | 0
out core | Core electrons | - | 54 | 0
out valence | Valence electrons | - | 5 | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →