molecalculator

Moles & Molar Mass

Calcium Phosphate Ca3(PO4)2 Molar Mass

Calculator No. 01-12012 · Updated · Formula and assumptions shown below

Molarity 0.0377 mol/L
Concentration in millimolar
37.68 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
310.18 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of calcium phosphate, Ca3(PO4)2, is 310.18 g/mol. This value is the sum of the atomic weights of three calcium atoms, two phosphorus atoms, and eight oxygen atoms in one formula unit of the compound.

Formula

To find the molar mass of calcium phosphate, add the molar masses of each element multiplied by its subscript in the formula Ca3(PO4)2:

Molar mass = (3 × atomic mass of Ca) + (2 × atomic mass of P) + (8 × atomic mass of O)

  • Calcium (Ca): 40.078 g/mol × 3 = 120.234 g/mol
  • Phosphorus (P): 30.974 g/mol × 2 = 61.948 g/mol
  • Oxygen (O): 15.999 g/mol × 8 = 127.992 g/mol

Sum: 120.234 + 61.948 + 127.992 = 310.174 g/mol, often rounded to 310.18 g/mol.

Worked Example

Using the calculator defaults: you have 2.922 g of calcium phosphate and want to prepare 250 mL of a solution. The molar mass is 310.18 g/mol.

First, convert volume to liters: 250 mL ÷ 1000 = 0.250 L.

Moles of Ca3(PO4)2 = mass ÷ molar mass = 2.922 g ÷ 310.18 g/mol = 0.009420 mol.

Molarity = moles ÷ volume = 0.009420 mol ÷ 0.250 L = 0.03768 mol/L (or 37.68 mM).

Assumptions

  • The compound is pure anhydrous calcium phosphate (no water of hydration).
  • Atomic weights are the IUPAC standard values; slight variations exist among sources.
  • The solution volume is the final total volume, not the volume of solvent added.
  • Calcium phosphate has very low solubility in water (about 0.002 g/100 mL at 25 °C); the calculation assumes you are working with a soluble form or a suspension for theoretical purposes.

Background and Uses

Calcium phosphate refers to a family of calcium salts of phosphoric acid. The most common form, tricalcium phosphate (Ca3(PO4)2), is a white, odourless solid that occurs naturally as the mineral whitlockite. It is a major component of bone and tooth enamel, making it important in biology and medicine.

In industry, calcium phosphate is used as an anti-caking agent in food, a calcium supplement, a polishing agent in toothpaste, and a source of phosphorus in fertilizers. In the lab, it is often used to prepare phosphate buffers or to study precipitation reactions.

How to Calculate It Yourself

To compute the molar mass of any compound, follow these steps:

  1. Write the chemical formula and count the number of atoms of each element.
  2. Look up the atomic weight of each element (in g/mol) from a periodic table.
  3. Multiply each atomic weight by its subscript.
  4. Add all the products to get the total molar mass.

For hydrated forms like Ca3(PO4)2·H2O, add the molar mass of water (18.015 g/mol) per water molecule.

Common Mistakes and Misconceptions

  • Forgetting the parentheses: The formula (PO4)2 means the entire phosphate group is doubled. Some students calculate only one PO4 and get 230 g/mol, which is wrong.
  • Using the wrong atomic weight: Always use the most recent IUPAC standard values. For example, phosphorus is 30.974, not 31.0 if you need precision.
  • Confusing molar mass with molecular weight: For ionic compounds like Ca3(PO4)2, the term “formula weight” is more accurate, but “molar mass” is widely used.
  • Rounding too early: Round only the final answer to avoid accumulation of errors.

Solubility and Practical Considerations

Calcium phosphate is almost insoluble in water (Ksp ≈ 2.0 × 10-29 at 25 °C). This means you cannot prepare a 0.0377 M aqueous solution by simply dissolving the solid. For lab work, you would use a suspension or a more soluble salt like calcium dihydrogen phosphate (Ca(H2PO4)2) to make phosphate solutions.

When using the calculator, remember it computes the theoretical molarity if the compound were fully soluble. In practice, you may need to account for solubility limits or use a different salt.

Frequently Asked Questions

Why is the molar mass of Ca3(PO4)2 not a whole number?

Because atomic weights are weighted averages of naturally occurring isotopes. For example, calcium has isotopes with masses 40, 42, 43, 44, and 46, and the average comes to 40.078. These averages are not integers, so the molar mass is not a whole number.

What is the difference between molar mass and molecular weight?

Molecular weight is the sum of atomic weights of atoms in a molecule, expressed in atomic mass units (amu). Molar mass is the same numerical value but expressed in grams per mole (g/mol). For ionic compounds like calcium phosphate, “formula weight” is also used, but molar mass is the standard term in SI.

How many grams are in one mole of calcium phosphate?

One mole of Ca3(PO4)2 weighs exactly 310.18 grams. This is the molar mass expressed in grams.

Does the molar mass change if the compound is hydrated?

Yes. If you have a hydrate like Ca3(PO4)2·H2O, you add the molar mass of water (18.015 g/mol) for each water molecule. For example, the monohydrate would be 310.18 + 18.015 = 328.20 g/mol.

Why is calcium phosphate used in bone grafts?

Because its composition is similar to the mineral phase of bone, and it is biocompatible and osteoconductive, meaning it supports new bone growth. The molar mass is not directly relevant to its biological function, but knowing it helps in preparing synthetic materials.

Safety and Handling

Calcium phosphate is generally non-toxic and safe to handle, but as with any fine powder, avoid inhaling dust. When preparing solutions or suspensions, wear safety goggles and gloves. Follow your lab method, the safety data sheet (SDS), and your supervisor. For disposal, follow local regulations; calcium phosphate is not classified as hazardous waste.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 310.18 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →