molecalculator

Moles & Molar Mass

Calcium Phosphate Formula Mass & How to Find It

Calculator No. 01-12014 · Updated · Formula and assumptions shown below

Amount of substance 1.0000 mol
Number of formula units
6.022 × 1023
Result, rounded to 3 decimal places
Mass of sample
310.18 g
Set in the form below
Molar mass (Ca3(PO4)2)
310.18 g/mol
Set in the form below
You enter
Mass of sample (g), Molar mass (Ca3(PO4)2) (g/mol)
You get
Amount of substance (mol), Number of formula units
Rounding
4 dp · 3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The formula mass of calcium phosphate, Ca3(PO4)2, is 310.18 g/mol (using standard atomic weights: Ca 40.078, P 30.974, O 15.999). This value is the sum of the atomic masses of three calcium atoms, two phosphorus atoms, and eight oxygen atoms in one formula unit of the compound.

Formula

The formula mass (molar mass) of a compound is the sum of the atomic masses of all atoms in its chemical formula, expressed in grams per mole (g/mol). For calcium phosphate, Ca3(PO4)2:

  • Calcium (Ca): 3 atoms × 40.078 g/mol = 120.234 g/mol
  • Phosphorus (P): 2 atoms × 30.974 g/mol = 61.948 g/mol
  • Oxygen (O): 8 atoms × 15.999 g/mol = 127.992 g/mol

Total = 120.234 + 61.948 + 127.992 = 310.174 g/mol, usually rounded to 310.18 g/mol.

Worked Example

Using the calculator defaults: you have a sample mass of 310.18 g of calcium phosphate. Its molar mass is 310.18 g/mol. To find the amount in moles:

n = m / M = 310.18 g / 310.18 g/mol = 1.0000 mol

To find the number of formula units: multiply by Avogadro’s number (6.022 × 1023 mol−1):

Number = 1.0000 mol × 6.022 × 1023 mol−1 = 6.022 × 1023 formula units.

So the calculator returns 1.0000 mol and 6.022 × 1023 formula units for the default input.

Assumptions

  • The atomic weights used are the IUPAC standard atomic weights (abridged).
  • The formula is the anhydrous form Ca3(PO4)2; hydrates (e.g., Ca3(PO4)2·H2O) have higher molar masses.
  • The sample is pure calcium phosphate with no adsorbed water or impurities.

Why the Formula Mass Matters

Formula mass is the bridge between the mass of a substance and the number of particles (atoms, molecules, or formula units) it contains. In the lab, you rarely count individual formula units; you weigh a sample. Knowing the molar mass lets you convert that mass to moles, which is essential for stoichiometry, preparing solutions, and calculating yields.

For calcium phosphate specifically, this value appears in many contexts:

  • Preparing phosphate buffer solutions or cell culture media.
  • Calculating the calcium or phosphate content in fertilizers, supplements, or bone ash.
  • Determining the amount of calcium phosphate needed for a given number of moles in a synthesis.

How to Calculate It Yourself

If you don’t have a calculator, you can do it by hand with a periodic table:

  1. Write the chemical formula correctly: Ca3(PO4)2. Note the subscript 2 applies to the entire phosphate group, so you have 2 P atoms and 8 O atoms.
  2. Look up the atomic mass of each element (usually below the element symbol).
  3. Multiply each atomic mass by the number of atoms of that element.
  4. Add the products together.

Example: Ca = 40.08 × 3 = 120.24; P = 30.97 × 2 = 61.94; O = 16.00 × 8 = 128.00. Sum = 310.18 g/mol. (Slight rounding differences may occur depending on the atomic weights you use.)

Common Mistakes and Misconceptions

One frequent error is forgetting to multiply the entire phosphate group by the subscript 2. Some students write Ca3PO4 and miss the extra P and O atoms. Another error is using the atomic number instead of the atomic mass. The atomic number (20 for Ca) is not the mass; the mass is roughly twice that for many elements.

A related misconception: formula mass and molecular mass are often used interchangeably, but strictly speaking, molecular mass applies to covalent compounds, while formula mass applies to ionic compounds like calcium phosphate. In practice, the numerical value is the same concept.

Also note that the molar mass of a hydrate is different. For example, calcium phosphate monohydrate (Ca3(PO4)2·H2O) has a molar mass of 328.19 g/mol (310.18 + 18.015). Always check the exact formula of the substance you are using.

Comparing Calcium Phosphate Forms

Calcium phosphate exists in several forms, each with its own formula mass:

  • Ca3(PO4)2 (tricalcium phosphate): 310.18 g/mol
  • CaHPO4 (dicalcium phosphate): 136.06 g/mol
  • Ca(H2PO4)2 (monocalcium phosphate): 234.05 g/mol
  • Ca5(PO4)3OH (hydroxyapatite): 502.31 g/mol

When a recipe or protocol says “calcium phosphate,” it usually means the tribasic form (Ca3(PO4)2), but always confirm.

Frequently Asked Questions

What is the difference between formula mass and molar mass?

Formula mass is the sum of atomic masses in a formula unit (in atomic mass units, amu), while molar mass is the same number expressed in grams per mole (g/mol). Numerically they are identical; the only difference is the unit. For example, the formula mass of Ca3(PO4)2 is 310.18 amu, and the molar mass is 310.18 g/mol.

Why is calcium phosphate not soluble in water?

Calcium phosphate has very low solubility in water (Ksp ≈ 2 × 10−29 for the tribasic form). This is because the strong electrostatic attractions between Ca2+ and PO43− ions are not overcome by water’s solvation energy. In practice, it is considered insoluble, which is why it is used in ceramics and bone grafts.

How many atoms are in one formula unit of calcium phosphate?

One formula unit of Ca3(PO4)2 contains 3 calcium atoms + 2 phosphorus atoms + 8 oxygen atoms = 13 atoms total. To find the number of atoms in a mole, multiply by Avogadro’s number: 13 × 6.022 × 1023 = 7.83 × 1024 atoms per mole.

Is calcium phosphate the same as calcium phosphide?

No. Calcium phosphate (Ca3(PO4)2) contains phosphate (PO43−) and is a stable, non-flammable solid. Calcium phosphide (Ca3P2) contains phosphide (P3−) and reacts with water to produce phosphine gas, which is toxic and flammable. They are completely different compounds with different formulas and properties.

What is the percent composition of calcium in calcium phosphate?

The percent by mass of calcium in Ca3(PO4)2 is (120.234 g/mol ÷ 310.174 g/mol) × 100% = 38.76%. Phosphorus is 19.97%, and oxygen is 41.27%. These percentages are useful when calculating how much calcium a given mass of the compound provides.

Related

Formula used
in m | Mass of sample | g | 310.18 | 0
in mm | Molar mass (Ca3(PO4)2) | g/mol | 310.18 | 0
out n | Amount of substance | mol | m / mm | 4
out nm | Number of formula units | - | n * 6.02214076e23 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →