The chemical formula for calcium phosphate is Ca3(PO4)2, and its molar mass is 310.18 g/mol. This value is calculated by summing the atomic weights of three calcium atoms, two phosphorus atoms, and eight oxygen atoms.
Formula
The molar mass (M) of calcium phosphate is the sum of the atomic masses of its constituent atoms, multiplied by their respective counts in the formula unit:
M(Ca3(PO4)2) = 3 × Ar(Ca) + 2 × Ar(P) + 8 × Ar(O)
- Ar(Ca) = 40.078 g/mol (calcium)
- Ar(P) = 30.974 g/mol (phosphorus)
- Ar(O) = 15.999 g/mol (oxygen)
Plugging in the values: 3 × 40.078 + 2 × 30.974 + 8 × 15.999 = 120.234 + 61.948 + 127.992 = 310.174 g/mol, which rounds to 310.18 g/mol. The calculator above uses the same arithmetic: you enter the mass of calcium phosphate, its molar mass (default is 310.18), and the final solution volume, and it returns the molarity in mol/L and mM.
Worked Example
Suppose you dissolve 310.18 g of calcium phosphate in enough water to make exactly 1000 mL of solution. What is the molarity?
- Convert volume to liters: 1000 mL × (1 L / 1000 mL) = 1.000 L.
- Calculate moles of solute: 310.18 g ÷ 310.18 g/mol = 1.000 mol.
- Molarity = moles ÷ liters = 1.000 mol ÷ 1.000 L = 1.0000 mol/L.
The calculator gives the same result: 1.0000 mol/L (or 1000.00 mM). If you used 2.922 g in 250 mL, you would get 0.0377 mol/L, which is a typical dilute lab concentration.
Assumptions
- The molar mass uses the IUPAC abridged standard atomic weights (Ca 40.078, P 30.974, O 15.999).
- The compound is the anhydrous form, Ca3(PO4)2. Hydrates (e.g., Ca3(PO4)2·H2O) have higher molar masses.
- For molarity, the final volume (not the solvent volume) is used; this assumes you dissolve the solute and then add solvent to the mark.
- Calcium phosphate is sparingly soluble in water (solubility ~0.002 g/100 mL at 25 °C), so a 1 M solution is not physically achievable. The calculator works for any hypothetical mass, but in practice you would work with suspensions or use a soluble salt like calcium chloride with phosphate buffer.
Background: What Is Calcium Phosphate?
Calcium phosphate is a family of minerals and salts containing calcium cations (Ca2+) and phosphate anions (PO43−). The most common form, tricalcium phosphate, has the formula Ca3(PO4)2. It is the main inorganic component of bone and tooth enamel, making up about 70% of bone mass. In nature, it appears as the mineral whitlockite or as hydroxyapatite (Ca10(PO4)6(OH)2) when hydrated. The term “calcium phosphate” often refers to the tricalcium salt, but other forms exist, such as monocalcium phosphate (Ca(H2PO4)2) and dicalcium phosphate (CaHPO4). Each has a different molar mass and solubility.
How to Calculate Molar Mass of Any Calcium Phosphate
The method is the same for any salt: write the formula, count each element, multiply by its atomic weight, and sum. For Ca3(PO4)2, the subscript 2 outside the phosphate group means you have two PO4 units, so 2 phosphorus and 8 oxygen atoms. A common mistake is to forget the subscript outside the parentheses, giving a mass of 278.18 g/mol (which corresponds to Ca3PO4, a nonexistent formula). Always check the charge balance: 3 × (+2) = +6, and 2 × (−3) = −6, so the formula is neutral.
Common Mistakes and Misconceptions
- Confusing Ca3(PO4)2 with CaPO4: The latter is not a valid neutral formula; you need three calcium ions for two phosphate ions.
- Using the molar mass of a hydrate: If your reagent is Ca3(PO4)2·H2O, the molar mass is 328.19 g/mol, not 310.18. Check the label.
- Assuming solubility: Calcium phosphate is nearly insoluble in water (Ksp ≈ 2.0 × 10−29). A 1 M solution is impossible; the calculator is for theoretical dilutions or for working with soluble derivatives.
- Rounding too early: If you use 40.1 for Ca instead of 40.078, you get 310.3 g/mol, which is a 0.04% error. For precise lab work, use the full atomic weights.
Why Molar Mass Matters in the Lab
Molar mass is the bridge between mass and moles. When preparing a buffer or a culture medium, you need to know how many grams of calcium phosphate to weigh out to achieve a specific molar concentration. However, because of its low solubility, calcium phosphate is often used in solid form (e.g., as a bone graft substitute) or in suspension. In solution, you would typically use a soluble calcium salt (like calcium chloride, CaCl2) and a phosphate salt (like sodium phosphate) to generate calcium phosphate precipitate. The molar mass of Ca3(PO4)2 is also used in stoichiometric calculations, such as determining the amount of calcium or phosphate in a given mass of fertilizer or supplement.
Alternatives and Related Compounds
If you need a soluble calcium phosphate source, consider monocalcium phosphate (Ca(H2PO4)2, molar mass 234.05 g/mol) or dicalcium phosphate dihydrate (CaHPO4·2H2O, molar mass 172.09 g/mol). These are used in fertilizers and food additives. For biological applications, hydroxyapatite (Ca10(PO4)6(OH)2, molar mass 1004.64 g/mol) is the mineral form in bone. The calculator above works for any of these if you enter the correct molar mass; the default is set to tricalcium phosphate.
Safety and Handling
Calcium phosphate is generally non-toxic and is used in food supplements and medical implants. However, as a fine powder, it can irritate the respiratory tract if inhaled. Always wear a dust mask and safety goggles when handling powders. For solution preparation, follow your lab method, the safety data sheet (SDS) and your supervisor. Do not ingest or inject any laboratory reagent. If you are working with phosphate buffers, note that pH and temperature affect solubility; the molarity calculation assumes ideal conditions.
Frequently Asked Questions
What is the molar mass of Ca3(PO4)2 in grams per mole?
It is 310.18 g/mol, calculated as 3×40.078 + 2×30.974 + 8×15.999. This is the mass of one mole of anhydrous tricalcium phosphate.
Is calcium phosphate soluble in water?
No, it is very sparingly soluble. The solubility product (Ksp) is about 2×10−29, which means only a tiny amount dissolves (roughly 0.002 g per 100 mL). In practice, you cannot make a concentrated solution; you would use a suspension or a soluble salt.
Why does the formula have a 3 and a 2?
Because calcium has a +2 charge and phosphate has a −3 charge. To balance the total charge to zero, you need three Ca2+ ions (total +6) and two PO43− ions (total −6), giving Ca3(PO4)2.
What is the difference between calcium phosphate and hydroxyapatite?
Hydroxyapatite is Ca10(PO4)6(OH)2, a more complex mineral that also contains hydroxide ions. It is the main component of bone and teeth. Tricalcium phosphate is simpler and often used in ceramics and supplements.
How do I convert grams of calcium phosphate to moles?
Divide the mass in grams by the molar mass (310.18 g/mol). For example, 62.036 g ÷ 310.18 g/mol = 0.2000 mol.
Does the molar mass change if the compound is hydrated?
Yes. If you have a hydrate like Ca3(PO4)2·H2O, add the molar mass of water (18.015 g/mol) to get 328.20 g/mol. Always check the reagent label for water of crystallization.
Related
Formula used
in m | Mass of Ca3(PO4)2 | g | 310.18 | 0 in mm | Molar mass | g/mol | 310.18 | 0.001 in v | Final solution volume | mL | 1000 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Within 10 Percent Calculator – How to Use It5.00 %
- W/W Percentage Calculator: Formula & Examples2.92 %
- Percent Equation: Formula & How to Use It
- Percent of a Number Calculator: Find It Instantly20.00 %
- UWW GPA Calculator: How to Compute Your GPA
- PPM to w/w Calculator: Convert Easily5.0000 %