Calculate colony-forming units (CFU) from a dilution by multiplying the colonies counted by the reciprocal of the plated dilution and dividing by the volume plated in milliliters. Enter the colony count, dilution factor, and plated volume to estimate CFU per milliliter in the original sample.
Formula
The estimated concentration is:
CFU/mL = colonies counted ÷ (dilution fraction × volume plated in mL)
- Colonies counted is the number of distinct colonies on the plate, in CFU.
- Dilution fraction is the fraction of the original sample represented in the plated suspension. For a 10−4 dilution, enter 0.0001.
- Volume plated is the volume transferred to the plate, in mL.
- CFU/mL is the estimated number of colony-forming units per milliliter of the original sample.
The second output, total CFU represented, is the colony count adjusted for dilution only: colonies ÷ dilution fraction. It does not adjust for a plated volume different from 1 mL, so it is not a concentration.
Worked Example
Using the calculator defaults—100 colonies, a plated dilution fraction of 0.0001, and 0.1 mL plated:
- Multiply dilution by plated volume: 0.0001 × 0.1 mL = 0.00001 mL.
- Divide the observed count by that product: 100 ÷ 0.00001 mL = 10,000,000 CFU/mL.
- For the second output, adjust the count for dilution: 100 ÷ 0.0001 = 1,000,000 CFU.
The estimated concentration is 10,000,000 CFU/mL, or 1.0 × 107 CFU/mL. The displayed result is rounded to the nearest whole CFU/mL; the underlying arithmetic gives the same value exactly for these defaults.
Assumptions
- The dilution fraction entered is the cumulative dilution of the original sample in the material plated.
- Colonies counted arose from viable colony-forming units and can be distinguished and counted reliably.
- The plated volume is in milliliters; the sample is mixed sufficiently to represent the original material.
- This is an estimate from a plate count, not a direct count of every individual cell.
What CFU and Dilution Mean
A colony-forming unit is an operational measure: a viable cell, or a group of cells that remain together, capable of producing a visible colony under the chosen growth conditions. As a result, CFU is not necessarily equal to the number of individual cells. Clumps can produce one colony, while cells that do not grow under the selected conditions will not be counted.
A dilution fraction describes how much original sample remains in a diluted portion. For example, a 1:10 dilution has fraction 1/10, or 0.1. A subsequent 1:100 dilution of that mixture gives a cumulative fraction of 0.1 × 0.01 = 0.001, equivalent to 10−3 of the original sample. Use the cumulative fraction for the portion actually plated, not just the final dilution step.
How to Choose the Correct Inputs
- Count: enter the colonies on the plate being used for the estimate. If the plate is recorded as TNTC (too numerous to count), do not substitute an invented count; use another suitable dilution or a method specified by the protocol.
- Dilution: enter a fraction such as 0.001, not the denominator 1000. A “10−3 dilution” means 0.001.
- Volume: convert to milliliters before entering. For example, 100 µL is 0.1 mL because 1 mL = 1000 µL.
- Replicate plates: follow the method’s rule for combining replicates. If counts are combined as a mean, use that mean as the count only when the plates have the same dilution and plated volume. Do not casually pool counts across different dilutions.
When several plates are available, microbiology methods often specify a countable range and rules for replicate plates. These are method-dependent rather than universal: use the range and calculation convention given by the applicable protocol or reporting standard.
Reading the Result and Common Errors
The result is normalized to one milliliter of the original sample. A plate with 100 colonies at a 10−4 dilution and a 0.1 mL plated volume represents 107 CFU/mL, not 106. Omitting the plated volume would miss a factor of ten because only one-tenth of a milliliter was plated.
- Using the dilution denominator directly: if the dilution is 10−4, enter 0.0001, rather than 10,000. Equivalently, the formula can be written CFU/mL = colonies × reciprocal dilution ÷ plated mL.
- Mixing up dilution and concentration: a smaller dilution fraction means a more diluted sample, so the corrected original concentration becomes larger.
- Forgetting cumulative dilution: multiply serial dilution fractions together before calculating.
- Reporting false precision: a colony count is a discrete observation and plates vary. Do not imply more precision than the count, replicates, and method support.
- Calling CFU/mL “cells/mL”: CFU estimates viable, culturable units under specified conditions, not all cells or all microorganisms present.
Limits and Practical Context
The calculation corrects for dilution and plated volume; it cannot correct poor mixing, pipetting error, colony merging, contamination, or a growth medium and incubation condition that fail to support the organisms of interest. The result also depends on sample handling and the method’s definition of a countable colony. A plate with no colonies does not prove the original sample contains zero viable organisms: it may mean the concentration is below the method’s detection capability for the volume examined.
For a different reporting unit, convert explicitly. CFU/mL multiplied by 1000 gives CFU/L. If the original material is a solid sample, the result may need to be reported as CFU/g instead; that calculation requires the mass represented in the suspension and any extraction or homogenization volumes, so this calculator does not infer it.
For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor.
Frequently Asked Questions
What is the formula for CFU/mL from a dilution?
CFU/mL = colonies counted ÷ (dilution fraction × volume plated in mL). The dilution fraction must be the cumulative fraction of the original sample.
Do I enter 10−4 as 0.0001 or 10,000?
Enter 0.0001 as the dilution fraction. The equivalent reciprocal-dilution version of the formula multiplies by 10,000 instead.
How do I calculate CFU/mL if I plated 100 µL?
Convert 100 µL to 0.1 mL, then use 0.1 for plated volume. Using 1 mL by mistake changes the estimate by a factor of ten.
Can CFU equal the number of cells?
Not necessarily. A colony can grow from one cell or a clump, and some living cells may not grow under the selected conditions.
What does zero colonies on a plate mean?
It means no colonies were observed in the plated portion under that method’s conditions. It does not establish that the original sample is sterile or contains no viable organisms.
Related
Formula used
in colonies | Colonies counted | CFU | 100 | 0 in dil | Dilution fraction plated | - | 0.0001 | 0 in vol | Volume plated | mL | 0.1 | 0 out cfu | CFU per milliliter | CFU/mL | colonies / (dil * vol) | 0 out total | Total colonies represented in original sample | CFU | colonies / dil | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Cell Culture Doubling Time Equation and Calculator24.00 h
- Cell Culture Seeding Density Calculator and Formula4,000.00 cells/cm^2
- Cell Culture Doubling Time Calculator and Formula24.00 h
- Cell Culture Doubling Time Calculator and Formula24.00 h
- Zero Order Release Kinetics Calculator and Explanation5.000 mg/h
- Zero Order Reaction Rate Calculator and Formula0.0020 mol/(L·s)