Ethanol (C2H5OH) is a two-carbon alcohol whose chemical diagram shows a central CH2 group bonded to a CH3 group on one side and an OH (hydroxyl) group on the other. The full structural formula is CH3–CH2–OH, and the molecular formula is C2H6O.
Formula
The molarity of an ethanol solution is calculated as:
c = m / (M × V)
where:
- c = molarity (mol/L)
- m = mass of ethanol (g)
- M = molar mass of ethanol (g/mol), 46.07 g/mol for C2H5OH
- V = final solution volume (L), converted from mL by dividing by 1000
The molar mass is derived from the atomic weights: C (12.011 × 2) + H (1.008 × 6) + O (15.999) = 46.069 g/mol, usually rounded to 46.07 g/mol.
Worked Example
Using the default values from the calculator: dissolve 2.922 g of ethanol in enough water to make 250 mL of solution.
- Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
- Calculate moles of ethanol: 2.922 g ÷ 46.07 g/mol = 0.06343 mol
- Calculate molarity: 0.06343 mol ÷ 0.250 L = 0.2537 mol/L
The calculator rounds to 4 decimal places, giving 0.2537 mol/L (253.7 mM).
Assumptions
- The ethanol is pure (100% by mass) and anhydrous.
- The solution is at room temperature (25 °C) where the density of water is approximately 1 g/mL.
- Volume is the final solution volume after mixing, not the volume of solvent added.
- No volume contraction is considered; in practice, mixing ethanol and water reduces total volume by about 2–3%.
How to Draw the Diagram
There are three common ways to represent ethanol chemically:
- Molecular formula: C2H6O – shows only the atom counts, not how they connect.
- Condensed structural formula: CH3CH2OH – shows the order of atoms and the hydroxyl group.
- Full structural (Lewis) diagram: shows every bond between atoms – H atoms singly bonded to C or O, the two C atoms singly bonded to each other, and the O atom bonded to one C and one H.
In the full diagram, the central carbon (C1) has three hydrogen atoms and one carbon neighbor; the terminal carbon (C2) has two hydrogens, one carbon neighbor, and one oxygen atom. The oxygen atom carries two lone pairs and is bonded to one hydrogen. The molecule is polar due to the electronegative oxygen, and the O–H bond allows hydrogen bonding.
Key Properties Related to the Structure
The structure explains ethanol’s behavior:
- Polarity: The C–O and O–H bonds are polar, making ethanol miscible with water in all proportions.
- Boiling point: 78.37 °C – higher than propane (a similar-size hydrocarbon) because of hydrogen bonding.
- Hydrogen bonding: The –OH group donates and accepts hydrogen bonds, which is why ethanol is a liquid at room temperature and dissolves many polar and nonpolar compounds.
- Acidity: The O–H hydrogen is weakly acidic (pKa ≈ 16), so ethanol can act as a very weak acid, but it is not acidic in water.
Common Mistakes in Drawing or Naming
Students often confuse ethanol with other two-carbon compounds:
- Dimethyl ether (CH3–O–CH3) has the same molecular formula C2H6O but a different structure – an ether, not an alcohol.
- Ethanal (acetaldehyde, CH3CHO) has a carbonyl group, not a hydroxyl group.
- Ethylene glycol (HO–CH2–CH2–OH) has two hydroxyl groups and is toxic, unlike ethanol.
When drawing the diagram, ensure the oxygen atom has two lone pairs and the carbon atoms each have four bonds. A common error is drawing a double bond between carbon and oxygen, which would make it ethanal, not ethanol.
Why the Molar Mass Matters
The molar mass of 46.07 g/mol is essential for preparing solutions. If you use the mass of commercial ethanol (often 95% or 96% by volume), you must account for the water content. The calculator assumes pure ethanol; for dilutions from a stock solution, use the density and concentration of the stock.
For example, 100 mL of 95% ethanol by volume contains about 95 mL of ethanol. At 25 °C, the density of 95% ethanol is about 0.789 g/mL (for the ethanol fraction), so the mass of ethanol is roughly 95 mL × 0.789 g/mL = 74.95 g. The molarity would be 74.95 g / 46.07 g/mol / 0.100 L ≈ 16.3 mol/L. But this is an approximation because the density of the mixture is not linear.
Frequently Asked Questions
What is the difference between ethanol and ethyl alcohol?
None – they are the same compound. “Ethyl alcohol” is the common name, and “ethanol” is the IUPAC systematic name. Both refer to CH3CH2OH.
Is ethanol the same as alcohol in beverages?
Yes, ethanol is the psychoactive ingredient in beer, wine, and spirits. However, “alcohol” in chemistry refers to a class of compounds with a hydroxyl group; methanol and isopropanol are also alcohols but are toxic and not safe to drink.
Why does ethanol have a higher boiling point than dimethyl ether?
Ethanol (boiling point 78 °C) can form hydrogen bonds between molecules because of the O–H group. Dimethyl ether (boiling point −24 °C) has no O–H bond, so only weaker dipole–dipole interactions occur.
How do I convert ethanol molarity to percent by volume?
You need the density of the solution. For dilute solutions, approximate: percent by volume = (molarity × molar mass) / (10 × density). For example, 1 mol/L ethanol has a mass of 46.07 g per liter. If the solution density is 0.99 g/mL, then percent by volume ≈ (46.07 / (10 × 0.99)) ≈ 4.65% v/v. For accurate work, use a hydrometer or a standard table.
Can ethanol be drawn as a line-angle structure?
Yes. In a line-angle diagram, each vertex and line endpoint represents a carbon atom, and hydrogens are implied. Ethanol would be drawn as a short zigzag: a line with a bend (representing the two carbons) and an –OH group attached to one end. However, the –OH group must be shown explicitly, as line-angle structures omit hydrogen atoms but not heteroatoms like oxygen.