Chlorine has the atomic number 17, meaning every chlorine atom contains 17 protons in its nucleus. Its electron configuration is 1s² 2s² 2p⁶ 3s² 3p⁵, often abbreviated as [Ne] 3s² 3p⁵.
Formula
The molarity (concentration) of a solution is calculated as:
c = m / (M × V)
- c = molarity in mol/L (M)
- m = mass of solute in grams (g)
- M = molar mass of solute in g/mol
- V = final solution volume in liters (L)
Note that the volume is entered in milliliters (mL) in the calculator, so the expression divides by 1000 to convert to liters.
Worked Example
Using the default values: you dissolve 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) in enough water to make 250 mL of solution.
- Convert volume to liters: 250 mL = 250 / 1000 = 0.250 L
- Calculate moles of NaCl: 2.922 g ÷ 58.44 g/mol = 0.05000 mol
- Calculate molarity: 0.05000 mol ÷ 0.250 L = 0.2000 mol/L
The calculator gives 0.2000 mol/L (or 200.0 mM). This is a standard 0.2 M NaCl solution.
Assumptions
- The solute is pure and fully dissolves.
- The volume is the final solution volume, not the volume of solvent added.
- Temperature is assumed to be around 25 °C; molarity changes slightly with temperature because volume changes.
- For ionic compounds like NaCl, complete dissociation is assumed when discussing colligative properties, but molarity itself counts formula units.
When to Use This Calculator
This molarity calculator is used whenever you need to prepare a solution of known concentration from a solid solute. Common applications include:
- Preparing buffers for biochemistry or molecular biology experiments.
- Making standard solutions for titrations or calibration curves.
- Diluting a stock solution to a lower concentration (though that is a separate dilution calculation).
- Converting between mass, moles, and concentration in stoichiometry problems.
It is a fundamental tool in any chemistry lab. The calculator gives you the molarity directly, so you can verify your calculations before weighing out chemicals.
How to Read the Result
The first output, molarity (mol/L), tells you the number of moles of solute per liter of solution. A 0.2 M NaCl solution means 0.2 moles of NaCl per liter. The second output, concentration in millimolar (mM), is simply the molarity multiplied by 1000. Many biological protocols use mM because working concentrations are often in the millimolar range.
For example, a 0.2 M solution is the same as 200 mM. If you need 500 mL of a 100 mM solution, you can use this calculator to find the required mass: enter 0.1 as the desired molarity (or use the formula) and solve for mass.
Common Mistakes and Pitfalls
- Using solvent volume instead of final volume: If you add 250 mL of water to 2.922 g of NaCl, the final volume will be slightly more than 250 mL. Always dissolve the solute in less water and then bring the volume up to the mark in a volumetric flask.
- Unit mix-ups: Molar mass must be in g/mol, not mg/mol. Volume must be in liters, not milliliters. The calculator handles the mL to L conversion, but double-check your inputs.
- Rounding too early: Rounding intermediate values can cause significant errors, especially in serial dilutions. Keep at least 4 significant figures until the end.
- Ignoring temperature: Molarity is temperature-dependent because volume changes. For precise work, control temperature or use molality (moles per kg of solvent).
Limitations of the Formula
The molarity formula assumes ideal behavior, which is accurate for dilute solutions. For concentrated solutions, the volume may not be exactly additive, and the density of the solution differs from that of the pure solvent. Also, the formula gives the nominal concentration; if the solute is hydrated (e.g., CuSO₄·5H₂O), the molar mass must include the water of crystallization.
For acids and bases, molarity is not the same as normality (equivalents per liter), though for monoprotic acids they are equal. Always check which concentration your protocol requires.
Frequently Asked Questions
What is the difference between molarity and molality?
Molarity (M) is moles of solute per liter of solution, while molality (m) is moles of solute per kilogram of solvent. Molarity depends on temperature because volume changes, whereas molality does not. Molality is used in colligative property calculations (e.g., boiling point elevation).
How do I prepare a solution of a specific molarity?
Weigh the calculated mass of solute, dissolve it in a small amount of solvent in a volumetric flask, then add solvent up to the calibration mark. Mix thoroughly. For example, to make 250 mL of 0.2 M NaCl, weigh 2.922 g, dissolve in about 150 mL water, then bring to 250 mL.
Can I use this calculator for dilutions?
No, this calculator is for preparing a solution from a solid. For dilutions, use the dilution formula M₁V₁ = M₂V₂. For example, to make 100 mL of 0.1 M from 1 M stock, you need 10 mL of stock plus 90 mL of solvent.
What is the molar mass of NaCl?
The molar mass of NaCl is 58.44 g/mol (22.99 for Na + 35.45 for Cl). This is the default value in the calculator. Always use the exact molar mass of the specific compound you are using, including any hydration water.
Why does the calculator show two concentrations?
The first is molarity in mol/L (the standard unit), and the second is the same value in millimolar (mM). Many lab protocols, especially in biology, use mM because working concentrations are often in that range. The two are directly proportional.
Safety and Lab Practice
When preparing solutions, always follow your lab method, the safety data sheet (SDS) for each chemical, and your supervisor’s instructions. Wear appropriate personal protective equipment (gloves, goggles, lab coat). Some solutes generate heat when dissolved (e.g., concentrated acids); add them slowly and with stirring. Never use laboratory solutions for consumption or medical purposes.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Organic Chemistry Reaction Calculator: How It Works
- Grams to Moles to Molecules: How to Convert0.2000 mol/L