Cobalt has the atomic number 27 and its electron configuration is 1s2 2s2 2p6 3s2 3p6 3d7 4s2. This means a neutral cobalt atom holds 27 electrons, distributed as [Ar] 3d7 4s2 in shorthand. The 27 protons in the nucleus define it as cobalt, and the 3d7 4s2 arrangement explains its magnetism, its common +2 and +3 oxidation states, and the deep blue color of its compounds.
Formula
The electron configuration is built by filling orbitals in order of increasing energy according to the Aufbau principle. The order of filling is:
1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p
Each orbital type holds a fixed maximum number of electrons:
- s orbitals: 2 electrons
- p orbitals: 6 electrons
- d orbitals: 10 electrons
- f orbitals: 14 electrons
For cobalt (Z = 27), the filling sequence is: 1s2 (2), 2s2 (4), 2p6 (10), 3s2 (12), 3p6 (18), 4s2 (20), then 3d7 (27). The 4s orbital fills before the 3d because it is slightly lower in energy in the neutral atom. The shorthand uses the previous noble gas, argon ([Ar], Z = 18), to represent the core electrons: [Ar] 3d7 4s2.
Worked Example
Using the calculator with the default atomic number Z = 27:
- Start with the first 18 electrons: 1s2 2s2 2p6 3s2 3p6 (this is argon).
- Add the next 2 electrons in 4s: 4s2 (total 20).
- Place the remaining 7 electrons in 3d: 3d7 (total 27).
Full configuration: 1s2 2s2 2p6 3s2 3p6 3d7 4s2.
Shorthand: [Ar] 3d7 4s2.
Unpaired d electrons: 3 (the 3d subshell has 7 electrons; according to Hund’s rule, five occupy separate orbitals first, then two pair up, leaving three unpaired).
Assumptions
- The configuration is for a neutral, ground-state cobalt atom.
- The Aufbau principle and Madelung rule (n + ℓ ordering) are used; exceptions exist for some transition metals (e.g., chromium and copper), but cobalt follows the rule.
- Orbital energies are taken as the standard order for neutral atoms; ionized species lose 4s electrons first.
Why Cobalt’s Configuration Matters
The 3d7 4s2 arrangement is not just a textbook exercise—it drives cobalt’s chemistry. The three unpaired d electrons make cobalt magnetic; it is one of only three ferromagnetic elements at room temperature (along with iron and nickel). When cobalt forms ions, it loses the 4s electrons first, so Co2+ has the configuration [Ar] 3d7 and Co3+ is [Ar] 3d6. This electron loss pattern is why cobalt commonly shows +2 and +3 oxidation states, and why its compounds are often intensely colored—the d-electrons absorb visible light and transition between d-orbitals, producing the characteristic deep blue of cobalt glass and the pink of hydrated cobalt chloride.
How to Read the Configuration
Each term like 3d7 tells you three things: the principal quantum number (3), the subshell type (d), and the number of electrons in that subshell (7). The sum of all superscripts equals the atomic number (2+2+6+2+6+7+2 = 27). The shorthand [Ar] 3d7 4s2 is shorter and highlights the valence electrons (the 3d and 4s), which are the ones involved in bonding. For transition metals, the d electrons are often considered valence electrons even though they are in an inner shell, because they participate in chemical reactions.
Common Mistakes and Misconceptions
- Writing 3d9 4s0 instead of 3d7 4s2: Some students assume that because 3d is lower in energy than 4s after filling, the 4s should be empty. In the neutral atom, the 4s is filled first and remains occupied; the 3d9 4s0 configuration is for the Co+ ion, not the neutral atom.
- Forgetting Hund’s rule: The 3d subshell has five orbitals; electrons fill each singly before pairing. Cobalt’s 3d7 means three orbitals have one electron and two orbitals have two, giving three unpaired electrons—not seven.
- Using the wrong order for ions: When writing configurations for Co2+ or Co3+, remove electrons from the 4s first, not the 3d. Co2+ is [Ar] 3d7, not [Ar] 3d5 4s2.
Comparisons with Neighboring Elements
Cobalt sits between iron (Z=26) and nickel (Z=28) in the periodic table. Iron has [Ar] 3d6 4s2, cobalt has [Ar] 3d7 4s2, and nickel has [Ar] 3d8 4s2. The gradual filling of the 3d subshell explains the trends in atomic radius, ionization energy, and magnetic properties across this series. Chromium (Z=24) and copper (Z=29) are exceptions to the Aufbau rule—they have [Ar] 3d5 4s1 and [Ar] 3d10 4s1 respectively, because a half-filled or fully filled d subshell is extra stable. Cobalt does not have such an exception, so it follows the regular order.
Practical Uses and Context
Knowing cobalt’s electron configuration helps predict its behavior in real-world applications. The unpaired d electrons are responsible for cobalt’s ferromagnetism, which makes it valuable in permanent magnets, hard disk drives, and electric vehicle motors. The +2 and +3 oxidation states are used in lithium-ion battery cathodes (lithium cobalt oxide, LiCoO2), where cobalt’s ability to cycle between oxidation states allows the battery to store and release charge. The blue color from d-d transitions is exploited in cobalt glass, ceramics, and pigments like cobalt blue (CoAl2O4). In biology, cobalt is the metal center of vitamin B12, where it coordinates to a corrin ring and participates in methyl group transfers—a direct consequence of its d-electron chemistry.
Frequently Asked Questions
What is the electron configuration of Co2+?
Co2+ has the configuration [Ar] 3d7. When a cobalt atom loses two electrons to form a +2 ion, it loses the two 4s electrons first, leaving the 3d7 subshell intact. This is a common source of confusion because the 3d subshell is written before the 4s in the full configuration, but the 4s electrons are higher in energy for ions and are removed first.
Why is cobalt magnetic?
Cobalt is ferromagnetic because it has three unpaired electrons in its 3d subshell. In the solid state, the magnetic moments of these unpaired electrons align parallel in domains, producing a net magnetic field. This alignment persists at room temperature, making cobalt one of the few elements that can be magnetized permanently.
How many valence electrons does cobalt have?
For transition metals, valence electrons are typically the sum of the electrons in the outermost s and d subshells. Cobalt has 2 in 4s and 7 in 3d, giving 9 valence electrons. However, in chemical bonding, cobalt often uses only the 4s and some of the 3d electrons; the most common oxidation states are +2 and +3, meaning it loses 2 or 3 of these valence electrons.
Is cobalt’s configuration an exception to the Aufbau principle?
No, cobalt follows the Aufbau principle exactly. The exceptions are chromium (Z=24) and copper (Z=29), which have configurations [Ar] 3d5 4s1 and [Ar] 3d10 4s1 respectively, to achieve half-filled or fully filled d subshells. Cobalt’s 3d7 does not have that special stability, so it fills normally.
What is the noble-gas shorthand for cobalt?
The noble-gas shorthand is [Ar] 3d7 4s2. The [Ar] represents the electron configuration of argon (1s2 2s2 2p6 3s2 3p6), which accounts for the first 18 electrons. This shorthand is useful because it focuses on the valence electrons that participate in chemistry.
Does cobalt have 8 or 10 electrons in the 3d subshell?
Neutral cobalt has exactly 7 electrons in the 3d subshell. The confusion arises because cobalt can lose 2 or 3 electrons to form ions: Co2+ still has 7 d-electrons (since it loses 4s electrons), while Co3+ has 6 d-electrons. Neither has 8 or 10; those numbers would correspond to nickel (3d8) or zinc (3d10).
Related
Formula used
in z | Atomic number Z | - | 27 | 1 | 118 out ec | Electron configuration | - | electron_config(z) | 0 out shorthand | Noble-gas shorthand | - | noble_gas(z) | 0 out unpaired | Unpaired d electrons | - | d_unpaired(z) | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works