molecalculator

Moles & Molar Mass

Temperature Conversion Calculator and Formulas

Calculator No. 01-3962 · Updated · Formula and assumptions shown below

Converted temperature -454.08 scale units
Temperature
25 °C
Set in the form below
Convert from
Celsius
Set in the form below
Convert to
Celsius
Set in the form below
You enter
Temperature (°C), Convert from, Convert to
You get
Converted temperature (scale units)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This temperature conversion calculator converts a value between Celsius, Fahrenheit, and kelvin. Enter a temperature and choose its starting and target scales to get the converted temperature using the standard formulas.

Formula

The calculator uses the selected source and destination scales to apply the appropriate conversion. Its input, t, is the numerical temperature. The values from and to are selector codes: 1 means Celsius, 2 means Fahrenheit, and 3 means kelvin. The first output is the converted temperature, displayed to two decimal places.

The standard formulas are:

  • Celsius to Fahrenheit: °F = (°C × 9/5) + 32.
  • Fahrenheit to Celsius: °C = (°F − 32) × 5/9.
  • Celsius to kelvin: K = °C + 273.15.
  • Kelvin to Celsius: °C = K − 273.15.
  • Fahrenheit to kelvin: K = (°F − 32) × 5/9 + 273.15.
  • Kelvin to Fahrenheit: °F = (K − 273.15) × 9/5 + 32.

If the source and destination are the same scale, the value remains unchanged. The calculator expression selects the corresponding rule from this list using the two drop-down values. Temperature conversions are affine: they may involve both a scale factor and an offset. That is why multiplying a Fahrenheit reading by 5/9 alone does not convert it to Celsius.

Worked Example

Using the defaults, the input is 25 °C, with Celsius selected as the source and Fahrenheit as the destination. The Celsius-to-Fahrenheit formula is:

°F = (25 × 9/5) + 32 = 45 + 32 = 77.00 °F.

The same input converted to kelvin would be 25 + 273.15 = 298.15 K. The displayed answer depends on the destination scale selected.

Assumptions

  • The input represents a temperature reading, not a temperature difference.
  • Temperatures are expressed on the selected scale; the calculator does not infer the scale from the number.
  • Conversions use the exact offset of 273.15 between Celsius and kelvin and the exact scale ratios in the formulas.

How Temperature Scales Differ

Celsius and Fahrenheit use different degree sizes and different zero points. Water freezes at 0 °C and boils at 100 °C under standard atmospheric pressure; the corresponding Fahrenheit values are 32 °F and 212 °F. Those reference points explain why the Fahrenheit-to-Celsius formula must subtract 32 before applying the scale ratio.

Kelvin is the SI unit of thermodynamic temperature. It starts at absolute zero, the theoretical lower limit of thermodynamic temperature, and has the same interval size as one degree Celsius. Kelvin values are written without a degree symbol: 300 K, not 300 °K. A temperature of 0 °C is therefore 273.15 K, not zero kelvin.

Temperatures below 0 °C or 0 °F can be physically meaningful. Kelvin, however, cannot be negative in ordinary thermodynamic use. The calculator’s input is constrained to at least −273.15 when interpreted as Celsius, which supports the stated input unit; if you select Fahrenheit or kelvin as the source, enter a value valid on that scale as well. In particular, avoid entering a Fahrenheit temperature below −459.67 °F or a negative kelvin value.

Temperature Readings and Temperature Differences

A temperature reading locates a point on a scale; a temperature difference describes the gap between two readings. Offsets apply to readings, not differences. For example, 20 °C is 68 °F, but a rise of 20 °C is a rise of 36 °F, because the interval conversion is 20 × 9/5. Adding 32 to a temperature difference would be a mistake.

This distinction matters in lab notes, weather comparisons, thermal calculations, and specifications. To convert a difference from Celsius degrees to Fahrenheit degrees, multiply by 9/5. To convert a difference from Fahrenheit degrees to Celsius degrees, multiply by 5/9. Kelvin and Celsius differences have equal numerical values: a change of 1 K equals a change of 1 °C.

Choosing the Right Conversion

Choose the source scale that matches the units printed beside the value, then select the scale needed by the calculation or report. Never rely on the numerical size alone: 100 could mean 100 °C, 100 °F, or 100 K, which are very different temperatures.

  • Use Celsius for many everyday weather reports and common scientific observations.
  • Use Fahrenheit when the source or destination convention specifies it.
  • Use kelvin for thermodynamic equations and many scientific calculations that require absolute temperature.

Check whether a formula expects an absolute temperature or a difference. Gas-law relationships, for example, use absolute temperature in kelvin; inserting a Celsius value directly can give a physically incorrect result. Some empirical equations may be defined for Celsius or Fahrenheit, so follow the equation’s stated units rather than converting by habit.

Common Conversion Errors

  • Omitting the offset: Celsius to Fahrenheit requires multiplying by 9/5 and then adding 32.
  • Using the wrong order: For Fahrenheit to Celsius, subtract 32 first, then multiply by 5/9.
  • Mixing up readings and changes: Add or subtract the scale offset for readings, not temperature intervals.
  • Writing kelvin incorrectly: Use K without a degree sign, and do not treat 0 K as 0 °C.
  • Rounding too early: Keep the full calculator result for later steps and round only the final reported value to a sensible precision.
  • Forgetting the source unit: A number without its scale cannot be converted reliably.

For a quick check, convert a result back to the original scale. Small discrepancies can result from rounding; a large discrepancy usually indicates a wrong scale, a misplaced offset, or an arithmetic error.

Frequently Asked Questions

How do I convert Celsius to Fahrenheit?
Multiply the Celsius temperature by 9/5, then add 32. For example, 25 °C becomes 77 °F.

How do I convert Fahrenheit to Celsius?
Subtract 32 from the Fahrenheit reading and multiply the result by 5/9. For example, 68 °F becomes 20 °C.

What is the formula for Celsius to kelvin?
Add 273.15 to the Celsius temperature. Thus, 25 °C is 298.15 K.

Can a temperature in kelvin be negative?
Not in ordinary thermodynamic use. Zero kelvin is absolute zero, and kelvin temperatures are nonnegative.

Is a change of 1 °C the same as a change of 1 °F?
No. A change of 1 °C equals a change of 1.8 °F. Celsius and kelvin intervals, by contrast, have the same numerical size.

Related

Formula used
in t | Temperature | °C | 25 | -273.15
sel from | Convert from | Celsius=1, Fahrenheit=2, Kelvin=3
sel to | Convert to | Celsius=1, Fahrenheit=2, Kelvin=3
out result | Converted temperature | scale units | (from - 1) * (to - 1) + (from - 1) * (2 - to) * ((t - 32) * 5 / 9) + (from - 1) * (3 - to) * (t - 273.15) + (2 - from) * (to - 1) * (t * 9 / 5 + 32) + (2 - from) * (3 - to) * ((t - 32) * 5 / 9 + 273.15) + (3 - from) * (to - 1) * ((t - 273.15) * 9 / 5 + 32) + (3 - from) * (3 - to) * (t - 273.15) + (from - to)^2 * t | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →