The relative formula mass (Mr) of anhydrous copper sulfate (CuSO₄) is 159.61 (rounded to two decimal places). For the common hydrated form, copper(II) sulfate pentahydrate (CuSO₄·5H₂O), the relative formula mass is 249.69. These values are calculated by summing the relative atomic masses of each element in the formula.
Formula
The relative formula mass (Mr) is the sum of the relative atomic masses (Ar) of all atoms in the chemical formula. For copper sulfate, the formula is CuSO₄, which contains:
- 1 copper atom (Cu, Ar = 63.546)
- 1 sulfur atom (S, Ar = 32.06)
- 4 oxygen atoms (O, Ar = 15.999)
So, Mr(CuSO₄) = 63.546 + 32.06 + (4 × 15.999) = 63.546 + 32.06 + 63.996 = 159.602. Using IUPAC abridged atomic weights (Cu 63.546, S 32.06, O 15.999), the value is 159.602, often rounded to 159.61. For the pentahydrate, add 5 × (2×1.008 + 15.999) = 5 × 18.015 = 90.075, giving 249.677, rounded to 249.69.
Worked Example
Using the calculator above with default values: you want to prepare 250 mL of a 0.0732 mol/L solution of anhydrous copper sulfate. The molar mass is 159.61 g/mol. The mass required is:
m = c × mm × (v / 1000) = 0.0732 × 159.61 × (250 / 1000) = 0.0732 × 159.61 × 0.250 = 2.921 g (rounded to 2.922 g).
The calculator shows the molarity: m / mm / (v / 1000) = 2.922 / 159.61 / 0.250 = 0.07324 mol/L, which rounds to 0.0732 mol/L (4 decimal places). The millimolar concentration is 73.24 mM.
Assumptions
- The copper sulfate is anhydrous (no water of crystallization). If you use the pentahydrate, the molar mass is 249.69 g/mol, not 159.61.
- The solute is pure and completely dissolves; no volume change upon dissolution is considered.
- The final solution volume is exactly 250 mL, not the solvent volume added.
- Atomic weights are IUPAC standard values; variations in isotopic abundance are negligible for lab work.
Why the Hydrate Matters
Copper sulfate is commonly sold as the blue pentahydrate, CuSO₄·5H₂O, which has a relative formula mass of 249.69. If you weigh out 2.922 g of the pentahydrate instead of the anhydrous form, you actually have only 2.922 × (159.61 / 249.69) = 1.868 g of CuSO₄, giving a molarity of 0.0468 mol/L – about 36% lower than intended. Always check the label: anhydrous is a white or gray powder; the pentahydrate is bright blue.
Common Mistakes and Misconceptions
- Using the wrong formula: Some sources list copper sulfate as CuSO₄, but the commercial reagent is often the pentahydrate. Always verify the formula before calculating.
- Rounding too early: Rounding atomic weights to whole numbers (Cu=64, S=32, O=16) gives 160, which is close but not accurate for precise molarity calculations. Use at least two decimal places.
- Confusing mass and moles: The relative formula mass is a ratio, not a mass in grams. One mole of CuSO₄ has a mass of 159.61 g, but the Mr itself has no units.
- Forgetting the water in the hydrate: The pentahydrate formula includes 5 water molecules; each adds 18.015 to the total.
How to Use the Calculator
Enter the mass of copper sulfate you have (in grams), the molar mass (159.61 for anhydrous, 249.69 for pentahydrate), and the final solution volume in mL. The calculator returns the molarity (mol/L) and millimolar concentration (mM). This is useful for preparing solutions for electroplating, agricultural sprays, or chemistry experiments. For example, to make 1 L of 0.1 M CuSO₄, you would need 15.961 g of anhydrous salt, but 24.969 g of the pentahydrate.
Limitations of the Calculation
The relative formula mass is a fixed value for a pure compound, but the molarity calculation assumes ideal behavior: complete dissolution, no volume change, and no chemical reaction with the solvent. In real lab work, the final volume may differ slightly from the sum of solute and solvent volumes, especially at high concentrations. Also, if the copper sulfate is not pure (e.g., contains impurities), the effective molarity will be lower. For precise work, always prepare the solution in a volumetric flask and adjust the volume to the mark.
Safety and Handling
Copper sulfate is harmful if swallowed and can irritate skin and eyes. Wear gloves and safety goggles when handling the powder or solution. Do not ingest; wash hands after use. Follow your lab method, the safety data sheet (SDS) and your supervisor. Dispose of copper sulfate solutions as hazardous waste – do not pour down the drain.
Frequently Asked Questions
What is the relative formula mass of copper sulfate pentahydrate?
It is 249.69. This includes the five water molecules. The anhydrous form is 159.61.
Why is the hydrated form blue but the anhydrous form white?
The blue color comes from the copper(II) ion surrounded by water molecules in the crystal lattice. When water is removed by heating, the anhydrous salt is white or gray. This color change is used as a test for water.
How do I convert between anhydrous and pentahydrate masses?
Multiply the mass of pentahydrate by (159.61 / 249.69) to get the equivalent mass of anhydrous copper sulfate. For example, 10 g of pentahydrate contains 6.39 g of CuSO₄.
Can I use the relative formula mass to find the percentage of copper in the compound?
Yes. In anhydrous CuSO₄, the mass fraction of copper is 63.546 / 159.61 = 0.398, or 39.8%. In the pentahydrate, it is 63.546 / 249.69 = 0.254, or 25.4%.
Why is the relative formula mass sometimes given as 160?
That is a rounded value using whole-number atomic weights (Cu=64, S=32, O=16). It is acceptable for rough calculations but not for precise molarity work.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 159.61 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Volume Calculator in Chemistry: How to Use It0.2000 mol/L
- Volume Calculator in mm: Convert & Calculate100,000 mm³
- Volume Calculator Feet and Inches: How to Use It3.12 ft³
- Volume Calculator: Convert ft to Yards1.00 yd³
- Surfboard Volume Calculator JS: How It Works32.4 L
- Volume Calculator cm to Litres: How to Convert2.500 L