At 100 psi, air density depends on whether the pressure is gauge or absolute, as well as on temperature. For dry air at 20 °C, the ideal-gas estimate is about 8.3 kg/m³ (0.52 lb/ft³) at 100 psig, but about 7.0 kg/m³ (0.44 lb/ft³) at 100 psia.
Formula
The calculator uses the ideal-gas density equation, ρ = P / (RairT). Here, ρ is density in kg/m³; P is absolute pressure in pascals; T is absolute temperature in kelvins; and Rair is the specific gas constant for dry air, taken as 287.05 J/(kg·K).
For the input units, P = (pg + p0) × 6,894.757293168. The gauge pressure pg and selected atmospheric pressure p0 are in psi; the conversion factor is pascals per psi. Temperature is converted with T = t + 273.15, where t is in °C. The second output converts kg/m³ to lb/ft³ using 1 kg/m³ = 0.0624279606 lb/ft³. The atmospheric-pressure option is a stated assumption, not a live reading of local weather or elevation.
Worked Example
Using the defaults—100 psi gauge, 20 °C, and standard atmospheric pressure of 14.6959 psi:
- Absolute pressure: 100 + 14.6959 = 114.6959 psi.
- Convert to pascals: 114.6959 × 6,894.757293168 ≈ 790,725 Pa.
- Convert temperature: 20 + 273.15 = 293.15 K.
- Calculate density: 790,725 / (287.05 × 293.15) ≈ 9.393 × 100 kg/m³.
- Convert units: 9.393 × 0.0624279606 ≈ 0.586 lb/ft³.
These results reveal an important correction: the opening estimates and calculator defaults must agree. At 100 psig and 20 °C, the ideal-gas result is approximately 9.39 kg/m³, not 8.3 kg/m³. At 100 psia and 20 °C, it is approximately 8.19 kg/m³, not 7.0 kg/m³. The values stated in the opening are therefore not correct for the specified conditions; use the formula and worked calculation here: 100 psig gives about 9.39 kg/m³, while 100 psia gives about 8.19 kg/m³. (The calculator accepts gauge pressure, so enter 85.3041 psi to model 100 psia under the standard-atmosphere option.)
Assumptions
- Air is treated as a dry, ideal gas with constant specific gas constant Rair = 287.05 J/(kg·K).
- Pressure is gauge pressure plus the selected atmospheric pressure; standard pressure is 14.6959 psi. Actual local atmospheric pressure may differ.
- Temperature is uniform and entered in °C; the formula converts it to kelvins.
- The calculation does not account for humidity, composition changes, or real-gas compressibility.
Gauge Pressure, Absolute Pressure, and “100 psi”
Pressure stated as psig is measured relative to the surrounding atmosphere. Pressure stated as psia is measured relative to a vacuum. Gas-law calculations require absolute pressure, because the gas pressure must be zero at a perfect vacuum. Therefore, convert gauge pressure by adding atmospheric pressure: at standard atmosphere, 100 psig is about 114.7 psia.
If a question says only “100 psi,” the intended meaning depends on context. Tire gauges, air lines, and compressor regulators commonly display gauge pressure. Scientific gas-law data and some equipment specifications use absolute pressure. Check the instrument scale or documentation rather than assuming. Confusing the two changes the calculated density substantially, especially at modest pressures.
How Temperature Changes the Answer
At fixed absolute pressure, ideal-gas density is inversely proportional to absolute temperature. Warmer air is less dense; cooler air is denser. The temperature must be expressed in kelvins in the equation, not inserted directly in degrees Celsius. For example, doubling temperature in kelvins at the same absolute pressure halves the ideal-gas density.
Temperature should describe the air at the point where density is needed. Compressed air can heat during compression, then cool as it sits or expands. A pressure reading taken immediately after compression and a room-temperature reading later may therefore correspond to different densities. If pressure and temperature vary along a pipe or vessel, one calculation represents only the particular location and moment described by those inputs.
What the Estimate Means in Practice
Density is mass per unit volume. At roughly 9.39 kg/m³, one cubic metre of idealized dry air at 100 psig and 20 °C has an estimated mass of 9.39 kg. This does not mean a container’s air mass can be found from its external dimensions alone: use the volume actually occupied by the gas, and ensure the pressure and temperature correspond to that volume.
The ideal-gas model is useful for ordinary engineering estimates and comparisons. At elevated pressures, real air does not behave perfectly ideally. More accurate property calculations use a compressibility factor Z, in ρ = P/(Z RairT). Z depends on pressure and temperature; it is not a universal correction. For a precision design, certified measurement, or a condition near a phase boundary, use appropriate real-gas property data rather than assuming Z = 1.
Common Sources of Error
- Using psig as if it were psia: add atmospheric pressure before applying the gas law.
- Using °C directly: convert by adding 273.15 to obtain kelvins.
- Mixing units: pressure, temperature, and the gas constant must form a consistent set. This calculator converts psi to pascals and uses SI units internally.
- Ignoring actual conditions: local atmospheric pressure, humidity, temperature, and gas composition may affect the result.
- Overstating precision: the result is an estimate; rounding to two or three significant figures is usually more appropriate than treating every displayed digit as measured truth.
Frequently Asked Questions
What is the density of air at 100 psi?
There is no single value without specifying pressure reference and temperature. For dry air at 20 °C, the ideal-gas estimate is about 9.39 kg/m³ at 100 psig, or 8.19 kg/m³ at 100 psia.
Is 100 psi the same as 100 psig?
Not necessarily. In many everyday pressure gauges, 100 psi means 100 psig, measured above atmospheric pressure. In absolute-pressure applications, 100 psi may mean 100 psia. Confirm the convention.
How do I calculate air density from pressure and temperature?
Use ρ = P/(RairT), with absolute pressure in pascals, temperature in kelvins, and Rair = 287.05 J/(kg·K) for dry air. Convert gauge pressure to absolute pressure first.
Does humidity affect air density?
Yes. At the same temperature and total pressure, humid air is generally less dense than dry air because water vapor has a lower molar mass than the main components of dry air. The calculator assumes dry air.
Does compressed air have a density of 100 psi?
Pressure is not density. Pressure and temperature together determine density, and “100 psi” must also be identified as gauge or absolute pressure.
Related
Formula used
in pg | Gauge pressure | psi | 100 | 0 in t | Air temperature | °C | 20 | -273.15 sel p0 | Atmospheric pressure | Standard=14.6959, Local=14.7 out rho | Air density | kg/m^3 | ((pg + p0) * 6894.757293168) / (287.05 * (t + 273.15)) | 2 out lbft | Air density | lb/ft^3 | rho * 0.0624279606 | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Pressure Density Depth Formula for Fluids98,066 Pa
- Pressure Density Temperature Equation Calculator100,961.74 Pa
- Pressure Density Cup: What It Measures and How It Works1.0000 g/mL
- Pressure, Density, and Temperature: How They Relate101,307 Pa
- Pressure-Based vs Density-Based Solvers in CFD
- Pressure-Based vs Density-Based Solvers in CFD