At 5,000 m above sea level, the standard-atmosphere air density is about 0.736 kg/m³ (about 0.000736 g/cm³). This calculator estimates density from altitude using the International Standard Atmosphere troposphere model; enter altitude in metres to get density, temperature, and pressure.
Formula
In the standard troposphere, density is calculated as ρ = ρ₀(1 − Lh/T₀)4.25588. Here, ρ is air density in kilograms per cubic metre (kg/m³), h is altitude above mean sea level in metres (m), ρ₀ is standard sea-level density, 1.225 kg/m³, L is the temperature lapse rate, 0.0065 K/m, and T₀ is standard sea-level temperature, 288.15 K. The exponent comes from the hydrostatic and ideal-gas relations with the standard-atmosphere constants.
The calculator also reports temperature and pressure using T = T₀ − Lh and p = p₀(1 − Lh/T₀)5.25588. T is in kelvins, p is in kilopascals, and p₀ is standard sea-level pressure, 101.325 kPa. These are model outputs, not measurements of the weather at a particular location. The constants are conventional International Standard Atmosphere values; real air composition and local conditions can vary.
Worked Example
For the default altitude, h = 5,000 m:
- Temperature factor: 1 − (0.0065 K/m × 5,000 m) / 288.15 K = 0.88721.
- Density: 1.225 kg/m³ × 0.887214.25588 ≈ 0.736 kg/m³.
- Temperature: 288.15 K − (0.0065 K/m × 5,000 m) = 255.65 K, or −17.50 °C.
- Pressure: 101.325 kPa × 0.887215.25588 ≈ 54.02 kPa.
Thus the headline result, rounded to three decimal places, is 0.736 kg/m³. The model’s temperature and pressure are intermediate context for interpreting that estimate.
Assumptions
- Air follows the ideal-gas relationship and has the standard-atmosphere composition.
- Altitude is geometric height above mean sea level, not height above a local valley or the ground beneath an aircraft.
- The troposphere has a constant temperature decrease of 6.5 K per kilometre, with standard sea-level reference conditions.
- The calculation describes a standard reference atmosphere, not actual weather or a site-specific measurement.
What the Number Means
Density is mass per unit volume. At 5,000 m, a cubic metre of standard-atmosphere air has a mass of about 0.736 kg, compared with 1.225 kg at standard sea level. That is roughly 60% of the sea-level density, or about 40% less. The same volume therefore contains less air mass, including less oxygen, even though the oxygen fraction of dry air remains close to 21% by volume.
Lower density affects processes that depend on the amount of air flowing through a space. For example, an engine, fan, or aircraft wing encountering a given volume of air at altitude receives less air mass than it would at sea level. This does not mean the oxygen percentage suddenly falls by 40%; rather, the total pressure and number of gas molecules per volume are lower. Actual performance depends on equipment, temperature, humidity, and operating conditions.
Why Density Changes with Altitude
Gravity compresses the atmosphere: air near the surface supports the weight of air above it, while pressure and density generally decline with height. Temperature also changes with altitude, and that matters because a warmer gas is less dense at the same pressure. The standard-atmosphere formula accounts for a defined temperature profile as well as the pressure change; it is not simply a fixed percentage decrease per kilometre.
The model used here applies to the lower atmosphere, where the standard temperature lapse rate is assumed to be constant. At and above the tropopause, the standard profile changes, so this calculator’s troposphere equation should not be extrapolated indefinitely. It is intended for ordinary elevations such as 5,000 m, not stratospheric flight levels.
Standard Atmosphere Versus Actual Conditions
“The density at 5,000 m” has no single exact value unless the weather and location are specified. Temperature and pressure can differ from standard values because of weather systems, latitude, season, and local atmospheric structure. Humidity also changes density: at the same temperature and pressure, moist air is slightly less dense than dry air because water molecules have lower molar mass than the average dry-air mixture.
For a real site, use a measured or forecast pressure and temperature, and account for humidity if the application needs high accuracy. The ideal-gas relation for dry air is ρ = p/(RspecificT), where p is absolute pressure in pascals, T is temperature in kelvins, and Rspecific for dry air is approximately 287.05 J/(kg·K). Do not substitute gauge pressure: the equation requires pressure relative to a vacuum. For humid air, use a moist-air calculation rather than treating the sample as dry.
Units, Comparisons, and Common Mistakes
Air density is commonly stated in kg/m³. Equivalent forms at the standard 5,000 m result include approximately 0.736 g/L, because 1 kg/m³ equals 1 g/L, and 0.000736 g/cm³. Be careful not to confuse density with pressure: pressure is about 54.02 kPa in the standard model, while density is about 0.736 kg/m³.
- Mixing altitude references: 5,000 m above sea level is not necessarily 5,000 m above the ground.
- Using Celsius in a gas equation: absolute temperature must be in kelvins. Convert °C to K by adding 273.15.
- Assuming the standard value is a local reading: the calculator uses reference conditions, not real-time weather data.
- Extending the equation too high: the constant-lapse-rate troposphere model has a limited altitude range.
Frequently Asked Questions
What is the density of air at 5,000 metres?
In the International Standard Atmosphere troposphere model, it is about 0.736 kg/m³. Actual density varies with local pressure, temperature, and humidity.
How much lower is air density at 5,000 m than at sea level?
The standard value is about 60% of the standard sea-level density of 1.225 kg/m³, so it is roughly 40% lower.
What is the air pressure at 5,000 m?
The standard-atmosphere pressure is approximately 54.02 kPa, or about 0.533 standard atmospheres. Weather conditions can shift the actual value.
Is there less oxygen at 5,000 m?
Oxygen remains about 21% of dry air by volume, but the lower total pressure means fewer oxygen molecules are present in a given volume of air.
Does temperature affect air density at 5,000 m?
Yes. At a given pressure, warmer air is less dense and colder air is denser. The standard result assumes a temperature of about −17.50 °C at that altitude.
Can I use this value for aviation or engineering?
It is a standard reference estimate, not a substitute for current atmospheric data or a design-specific calculation. Applications requiring precision should use the relevant measured conditions and approved technical methods.
Related
Formula used
in h | Altitude above sea level | m | 5000 | 0 out rho | Air density | kg/m^3 | 1.225 * (1 - 0.0065 * h / 288.15) ^ 4.25588 | 3 out t | Standard temperature | K | 288.15 - 0.0065 * h | 2 out p | Standard pressure | kPa | 101.325 * (1 - 0.0065 * h / 288.15) ^ 5.25588 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Pressure Density Depth Formula for Fluids98,066 Pa
- Pressure Density Temperature Equation Calculator100,961.74 Pa
- Pressure Density Cup: What It Measures and How It Works1.0000 g/mL
- Pressure, Density, and Temperature: How They Relate101,307 Pa
- Pressure-Based vs Density-Based Solvers in CFD
- Pressure-Based vs Density-Based Solvers in CFD