Convert density to molar mass by multiplying density by the molar volume: M = ρVₘ. This calculator uses density in g/mL and molar volume in mL/mol to return molar mass in g/mol; enter both values to see the result.
Formula
The relationship is M = ρ × Vₘ. Here, M is molar mass in grams per mole (g/mol), ρ is density in grams per millilitre (g/mL), and Vₘ is molar volume in millilitres per mole (mL/mol). The millilitres cancel, leaving g/mol.
The calculator expects density and molar volume in these units. If your density is given in g/L, divide it by 1000 to get g/mL; if it is in kg/m³, divide by 1000 to get g/mL. Convert volumes to mL/mol before entering them. If you have a molar volume in L/mol, multiply by 1000.
Worked Example
Using the defaults, density is 1.00 g/mL and molar volume is 58.44 mL/mol.
- Write the relationship: M = ρ × Vₘ.
- Substitute: M = 1.00 g/mL × 58.44 mL/mol.
- Cancel mL: M = 58.44 g/mol.
- To three decimal places, the calculator returns 58.440 g/mol.
The values are illustrative inputs, not a claim that every material with density 1.00 g/mL has a molar volume of 58.44 mL/mol. For a real substance, use density and molar volume measured or specified for that same substance and the same conditions.
Assumptions
- Density and molar volume refer to the same material, physical state, temperature, and pressure.
- The supplied molar volume is the volume occupied by one mole, not a sample volume or a solvent volume.
- The calculation is a direct unit conversion relationship; it does not infer molar volume from density alone.
Why Density Alone Is Not Enough
Density is mass divided by volume: ρ = m/V. Molar mass is mass divided by amount of substance: M = m/n. Dividing the first relationship by the second in the appropriate way gives density as molar mass per molar volume, or ρ = M/Vₘ. Rearranging gives M = ρVₘ.
This shows an important limitation: density alone cannot determine molar mass. A density of 1.00 g/mL could describe different substances with different molar volumes and molar masses. You need a second piece of information, commonly the molar volume, or an independent way to determine the amount of substance in a known sample.
For a gas, the missing information may come from a gas model and measured conditions. For a liquid or solid, molar volume may be calculated from a known molar mass and density, measured by another method, or reported for a specified material. Do not assume that a familiar density value uniquely identifies a compound.
When This Calculation Is Useful
The conversion is useful when density and molar volume are known but molar mass is needed, or when checking whether reported physical data are mutually consistent. It also helps explain the link between bulk properties and molecular-scale quantities: density describes mass in a unit volume, while molar volume describes the volume occupied by a mole.
- Check units first: g/mL multiplied by mL/mol gives g/mol.
- Keep conditions consistent: a gas’s density and molar volume change with temperature and pressure.
- Use the correct material basis: mixtures, solutions, and pure compounds can have different properties.
- Retain appropriate precision: the result cannot be more precise than the least precise input supports.
If you instead know a sample’s mass and volume, density can be calculated as mass divided by volume. That still does not give molar mass unless you also know the number of moles, or can obtain it from a valid independent measurement or model.
Gases, Liquids, and Solids
For an ideal gas, molar volume follows from the ideal gas law. At pressure P and absolute temperature T, Vₘ = RT/P, where R is the gas constant. With density ρ in g/L and molar volume in L/mol, the same relation gives M = ρRT/P. This form requires pressure, temperature, consistent units, and the ideal-gas approximation; real gases can deviate, especially at high pressure or near condensation.
For liquids and solids, molar volume is often less straightforward to obtain from conditions alone. If the molar mass is already known, Vₘ = M/ρ can calculate it from density, but that reverses the direction of the requested calculation. If the goal is to find an unknown molar mass, the molar volume must come from independent information rather than being derived from that same unknown mass.
For a solution or mixture, multiplying bulk density by a presumed molar volume is valid only if the molar volume is defined for the relevant component or mixture basis. A solution’s density does not by itself reveal the molar mass of its dissolved substance.
Common Mistakes and Limits
- Using density alone: the calculator requires molar volume too; density by itself is insufficient.
- Mixing units: entering density in g/L as though it were g/mL creates a factor-of-1000 error.
- Confusing sample volume with molar volume: use volume per mole, not the measured volume of an arbitrary sample.
- Combining mismatched conditions: gas data at different temperatures or pressures will not yield a sound result.
- Overstating precision: rounding inputs early can shift the final digits; keep full values through the calculation.
This equation is an identity when the inputs are defined consistently, not a universal method for discovering an unknown molar mass from one physical measurement. It also does not account for changes in composition, phase, or non-ideal gas behavior; those affect the supplied density or molar volume and the model used to obtain them.
Frequently Asked Questions
Can I calculate molar mass from density alone?
No. You also need molar volume, or other independent information that lets you determine the number of moles in a known mass.
What is the formula for density to molar mass?
Use M = ρVₘ: multiply density by molar volume, with compatible units such as g/mL and mL/mol.
How do I convert g/L to g/mL?
Divide by 1000. For example, 12 g/L equals 0.012 g/mL.
Can this formula be used for gases?
Yes, if density and molar volume refer to the same gas at the same temperature and pressure. For an ideal gas, molar volume can be estimated from Vₘ = RT/P using absolute temperature and consistent units.
Does temperature affect the answer?
It can. Temperature and pressure affect density and molar volume, especially for gases, so use values measured or calculated under matching conditions.
Related
Formula used
in rho | Density | g/mL | 1.00 | 0 in vm | Molar volume | mL/mol | 58.44 | 0 out m | Molar mass | g/mol | rho * vm | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calculator in Hindi: Meaning, Usage and Examples0.2000 mol/L
- Volume Strength Formula in Terms of Molarity11.20 volumes
- H2O2 Volume Strength to Molarity Calculator0.893 mol/L
- Volume Strength to Molarity: Formula and Calculator0.0409 mol/L
- Molar Volume: Definition, Formula, and Calculator22.414 L/mol
- Molar Volume of a Gas Calculator and Formula22.4140 L/mol