Molar volume is the volume occupied by one mole of a substance. This calculator finds molar volume by dividing a sample’s volume by its amount in moles; enter volume and amount, and it returns volume per mole in the units you choose.
Formula
Molar volume is sample volume divided by amount of substance:
Vm = V / n
- Vm is molar volume, in liters per mole (L/mol) or cubic meters per mole (m³/mol).
- V is the total volume of the sample, in liters (L).
- n is the amount of substance, in moles (mol).
The calculator’s second output converts L/mol to m³/mol using 1 L = 0.001 m³: divide the result in L/mol by 1000. The calculation is a ratio, so it does not by itself predict a volume from temperature, pressure, or chemical identity. Those factors matter when determining what volume a real sample occupies.
Worked Example
For the default inputs, the sample volume is 22.414 L and the amount is 1 mol.
- Apply Vm = V / n.
- Vm = 22.414 L / 1 mol = 22.414 L/mol.
- Convert to cubic meters per mole: 22.414 L/mol / 1000 = 0.022414 m³/mol.
The calculator displays 22.414 L/mol and 0.022414 m³/mol for these inputs.
Assumptions
- The entered volume and amount describe the same sample and refer to compatible conditions.
- Volume is entered in liters and amount in moles; the calculator performs no additional unit conversion.
- The calculation does not assume an ideal gas or a particular temperature, pressure, or phase.
What Molar Volume Tells You
Molar volume connects a macroscopic measurement—space occupied—to a chemical amount. It is useful for comparing how much volume corresponds to the same number of particles in different samples, provided the substance and conditions are understood. Its SI unit is cubic meters per mole, although liters per mole are often more convenient for gases and laboratory-scale volumes.
For example, if 2.00 mol of a liquid occupies 0.150 L, its molar volume is 0.0750 L/mol, or 75.0 mL/mol. The result describes volume per mole for that sample under the conditions at which its volume was measured. It is not the same thing as molarity: molarity is amount per volume, usually mol/L, whereas molar volume is volume per amount, L/mol. For a uniform solution, the two quantities are reciprocals when expressed with compatible units.
Molar volume can also be calculated for a solid, liquid, or gas. The meaning of “volume” needs care: for a solid it might be the volume of a measured piece, while for a solution it is the solution’s final volume, not necessarily the volume of solvent added. State what is included whenever reporting a value.
Gas Molar Volume and Conditions
Gas examples often quote a molar volume at a stated temperature and pressure. For an ideal gas, the relationship follows from the ideal gas law, PV = nRT. Dividing by n and rearranging gives Vm = V/n = RT/P, where P is absolute pressure, T is thermodynamic temperature in kelvins, and R is the gas constant. This shows why a gas’s molar volume is not a universal constant: at a fixed temperature it changes when pressure changes, and at a fixed pressure it changes when temperature changes.
The default example, 22.414 L/mol, corresponds approximately to one mole of an ideal gas at 0 °C and 1 atmosphere (101.325 kPa). It is a familiar reference value, not a promise that every gas sample occupies that volume. Real gases can deviate from ideal behavior, especially at high pressure or low temperature, and the deviation depends on the gas and its conditions. Some references use a different standard temperature or pressure, so compare values only after checking the conditions attached to each one.
For liquids and solids, molar volume is generally found from measured volume and amount, or from density and molar mass when those quantities are known. Since density and material properties vary with temperature, pressure, composition, and phase, a value should be tied to its measurement conditions rather than treated as universal.
How to Use the Calculator
- Enter the volume of the sample in liters. Convert milliliters to liters by dividing by 1000; for example, 250 mL = 0.250 L.
- Enter the amount of that same sample in moles. If the amount is given in millimoles, divide by 1000 to convert it to moles.
- Read the first output as L/mol and the second as m³/mol. The results are rounded to the displayed precision.
For instance, a volume of 250 mL and an amount of 0.500 mol give Vm = 0.250 L / 0.500 mol = 0.500 L/mol. Converting the entered units before calculating avoids errors that can change the answer by factors of 1000.
Common Mix-Ups and Limits
- Reversing the ratio: V/n is molar volume; n/V is amount concentration. Check the units to see which quantity you have calculated.
- Mixing units: The calculator expects liters and moles. Using 250 as though it were liters when the measurement is 250 mL makes the result 1000 times too large.
- Using solvent volume: For a solution, use its final total volume when the question concerns solution molar volume, not merely the volume of solvent poured in.
- Assuming a fixed gas value: A quoted gas molar volume applies only to its stated temperature, pressure, and model. Do not apply the 22.414 L/mol reference indiscriminately.
The calculator reports the arithmetic from the supplied values; it cannot verify that the volume and amount refer to the same material, that measurement conditions match, or that the volume was measured accurately. Precision in the displayed answer does not make imprecise input data more precise. Round the final result in keeping with the least precise measurements and report relevant conditions for comparisons.
Frequently Asked Questions
What is the definition of molar volume?
Molar volume is the volume of a substance divided by its amount in moles. It expresses the volume occupied per mole.
What is the formula for molar volume?
Use Vm = V/n: divide the sample volume by the number of moles. Keep the units consistent, such as liters and moles for an answer in L/mol.
What is the SI unit of molar volume?
The SI unit is cubic meters per mole (m³/mol). Liters per mole (L/mol) are also widely used; 1 L/mol equals 0.001 m³/mol.
Is molar volume the same as molarity?
No. Molar volume is volume divided by amount, while molarity is amount divided by volume. With compatible units, one is the reciprocal of the other.
Is the molar volume of a gas always 22.4 L/mol?
No. That is an approximate ideal-gas reference near 0 °C and 1 atm. A gas’s molar volume depends on temperature and pressure, and real gases may depart from ideal behavior.
Can molar volume be used for liquids and solids?
Yes. Divide a measured liquid or solid volume by its amount in moles. Report the material’s phase and measurement conditions when they matter, since volume can depend on conditions.
Related
Formula used
in v | Sample volume | L | 22.414 | 0 in n | Amount of substance | mol | 1 | 0 out vm | Molar volume | L/mol | v / n | 3 out vm3 | Molar volume | m³/mol | (v / n) / 1000 | 6
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calculator in Hindi: Meaning, Usage and Examples0.2000 mol/L
- Volume Strength Formula in Terms of Molarity11.20 volumes
- H2O2 Volume Strength to Molarity Calculator0.893 mol/L
- Volume Strength to Molarity: Formula and Calculator0.0409 mol/L
- Molar Volume of a Gas Calculator and Formula22.4140 L/mol
- Molar Volume Calculator: Meaning, Formula and Examples2,478.957 L/mol