A cup-size calculator estimates bra cup size from the difference between your bust and underbust measurements. Enter both measurements in the same unit to get an approximate cup size; the result is a starting point for trying bras, not a guarantee of fit, because sizing varies by brand and style.
Formula
The calculator reports the bust-to-underbust difference and estimates an EU-style cup index by dividing that difference by 2 cm and rounding down to a whole step. In symbols:
- D = B − U, where D is the measurement difference in centimetres, B is the bust measurement in centimetres, and U is the underbust measurement in centimetres.
- Index = floor(D ÷ 2 cm). The index is a count of approximate cup steps, not a universal letter size. A sizing chart is needed to map it to the letters used by a particular brand or country.
The size index is deliberately not presented as an A, B, C, or D result: cup letters do not have one internationally consistent numerical definition. This method also does not calculate a band size. Band sizing systems and rounding rules differ, and a measured underbust is not always the label printed on a bra.
Worked Example
Using the calculator’s default measurements, bust is 94 cm and underbust is 80 cm.
- Difference: D = 94 − 80 = 14 cm.
- Approximate index: floor(14 ÷ 2) = floor(7) = 7 cup steps.
The displayed result is a 14 cm difference and an index of 7. That index must be matched to a relevant sizing chart before assigning a cup letter. It is not a recommendation to buy a particular labeled size.
Assumptions
- Both measurements are in centimetres and are taken around the body, using a flexible tape that lies level and snug without compressing tissue.
- The bust measurement is taken around the fullest part of the breasts, while the underbust measurement is taken directly beneath them.
- A two-centimetre difference represents one approximate cup step in this simplified EU-style index. Actual charts may use different increments, rounding, or starting conventions.
- The calculation does not account for breast shape, asymmetry, bra construction, fabric stretch, or personal fit preferences.
How to Measure for a Cup Estimate
For a useful estimate, measure over bare skin or a thin, unpadded bra. Stand naturally and keep the tape parallel to the floor. Do not pull the tape tight enough to indent the skin. Taking each measurement twice can help reveal a placement or reading error; if the readings differ, reposition the tape and measure again.
- Wrap the tape around the torso immediately beneath the breasts for the underbust measurement. Keep it level across the back and record the number in centimetres.
- Measure around the fullest part of the bust without flattening the breasts. Check that the tape remains level and record that number in the same unit.
- Enter both values. If you measured in inches, convert both to centimetres first, or use a calculator designed for inches; never subtract one unit from the other.
- Use the output as a guide, then consult the sizing chart for the country and brand you are considering and assess fit in the actual bra.
Measurements can change over time with weight changes, hormonal changes, pregnancy, aging, and other ordinary body changes. A previous size is not necessarily a reliable substitute for current measurements.
Reading the Result and Choosing a Fit
A cup letter is not a fixed volume independent of band size. For example, a cup labeled D on one band size does not necessarily hold the same volume as a D on a different band size. This is why a calculator based only on the difference cannot identify a complete bra size on its own. The band measurement and the manufacturer’s chart matter too.
Use the estimate to narrow down what to try, not as a verdict. A reasonably fitting band should feel secure and sit level around the body. The cups should contain breast tissue without persistent spilling or obvious empty space, and the centre front should sit comfortably against the chest when the bra design is intended to do so. Straps should not have to carry most of the support by being pulled very tight.
- If the band rides up, it may be too loose, though the style or adjustment can also affect the fit.
- If the cups cut in or tissue spills over, try a larger cup or a different shape.
- If cups wrinkle or gape, the cup may be too large, or its shape may not suit the wearer.
- If the fit differs between breasts, choose a comfortable fit for the larger breast and adjust straps or use removable padding if desired.
Fit signs vary with bra construction, and comfort is personal. A size label is only a starting point; nearby sizes and different styles may fit differently.
Common Problems and Limitations
The most common error is treating a cup letter as a universal measurement. Letter sequences, increments, and chart conventions vary by sizing system and manufacturer. A calculator that turns a difference directly into a letter can conceal these assumptions, so this one reports a difference and a simple index instead.
Other sources of variation include tape placement, posture, measurement over padded clothing, rounding, and measuring at a different point in the breathing cycle. A tight tape can reduce a measurement, while a sloping tape can distort it. The estimate also cannot judge breast shape, projection, or whether a particular wire and cup design will feel comfortable.
The calculator does not determine a medical condition or explain changes in breast size. If you have a new lump, pain, skin changes, nipple changes, or another health concern, seek advice from a qualified health professional rather than relying on a sizing tool.
Frequently Asked Questions
How do I calculate my bra cup size?
Measure around the fullest part of the bust and directly beneath the breasts, using the same unit. Subtract underbust from bust, then compare the difference and your band measurement with the sizing chart used by the brand or region.
What does a 2 cm difference mean?
In a simplified EU-style method, each 2 cm corresponds to one approximate cup step. It does not define a universal letter size; check the relevant chart for its exact conventions.
Can I calculate cup size from bust measurement alone?
No. The estimate depends on comparing bust with underbust. A bust measurement alone cannot show the difference used by common measurement-based methods.
Is a cup size the same across all band sizes?
No. Cup volume is related to band size, and letter labels are not a single fixed volume across sizes or brands. Compare the complete size and fit, not just the cup letter.
Should I round my measurements?
Record measurements as accurately as the tape allows and follow the chosen sizing chart’s rounding instructions. Rounding before subtracting can shift an estimate near a size boundary.
Why does my calculated size not fit?
Measurement technique, sizing conventions, breast shape, and bra design can all affect fit. Treat the result as a starting point and try nearby sizes or styles if needed.
Related
Formula used
in bust | Bust measurement | cm | 94 | 0 in band | Underbust measurement | cm | 80 | 0 out cup | Estimated cup-size difference | cm | bust - band | 1 out size | Approximate cup index (EU-style) | cup steps | floor((bust - band) / 2) | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Skip Calculator for Soil: What It Can and Can’t Do7.500 m³
- USD to KPW Calculator: Convert Dollars to North Korean Won90,000.00 KPW
- OK Calculator on TV on the Radio? Meaning Explained
- Pension Calculator KP: Estimate Your Pension Benefits
- Neonatal Kp Calculator: What It Means80.0000 mmol/mmol
- Newton to kp Converter Calculator and Formula1.0000 kp