The electron configuration for tungsten (W, element 74) is [Xe] 4f14 5d4 6s2. In long form, it is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 4f14 5d4 6s2. This arrangement places tungsten in group 6 and period 6 of the periodic table, with six valence electrons (5d46s2).
Formula and How to Build the Configuration
The electron configuration is built by filling atomic orbitals in order of increasing energy, following the Aufbau principle. The order of filling (from lowest to highest energy) is: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p. Each orbital holds a maximum number of electrons:
- s orbitals hold 2 electrons
- p orbitals hold 6 electrons
- d orbitals hold 10 electrons
- f orbitals hold 14 electrons
For tungsten (Z=74), you add electrons one by one until you reach 74. The filling sequence for the first 74 electrons is: 1s2 (2), 2s2 (4), 2p6 (10), 3s2 (12), 3p6 (18), 4s2 (20), 3d10 (30), 4p6 (36), 5s2 (38), 4d10 (48), 5p6 (54), 6s2 (56), 4f14 (70), then 5d4 (74). The last two orbitals (5d and 6s) are the valence shell.
Worked Example: Writing W’s Configuration
Let’s build the configuration step by step using Z=74.
- Start with the core: [Xe] represents the 54 electrons of xenon: 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6.
- Remaining electrons: 74 – 54 = 20 electrons to place.
- Fill 4f: 14 electrons → 4f14. Now 20 – 14 = 6 left.
- Fill 5d: 4 electrons → 5d4. Now 6 – 4 = 2 left.
- Fill 6s: 2 electrons → 6s2.
- Combine: [Xe] 4f14 5d4 6s2.
Total electrons: 54 (Xe) + 14 + 4 + 2 = 74. The valence electrons are the 5d4 and 6s2 electrons, totaling 6.
Why Is It 5d⁴ 6s² and Not 5d⁵ 6s¹?
You might expect tungsten to have 5d5 6s1 because chromium (Cr) directly above it has that configuration. However, tungsten’s configuration is 5d4 6s2. The reason lies in the relative energies of the 5d and 6s orbitals. For heavier elements, relativistic effects stabilize the 6s orbital, making it lower in energy than the 5d orbital. This means the 6s electrons are held more tightly and are less likely to be promoted to the 5d subshell. The exact balance between exchange energy (which favors half-filled d subshells) and orbital energy differences results in the 5d46s2 arrangement being slightly more stable. This is a common exception to the Aufbau principle among transition metals, similar to how molybdenum (Mo) has 4d55s1 but tungsten does not follow the same pattern.
Common Mistakes and Misconceptions
One common mistake is writing 4f14 after 5d, but the 4f subshell fills before the 5d in the standard order. Another is confusing the valence electrons: for transition metals, the d electrons count as valence electrons. Tungsten’s valence is often +6 (as in WO3), but it can also be +4, +5, or +2. The 4f electrons are not valence electrons; they are core electrons. Also, note that the short form [Xe] 4f14 5d4 6s2 is preferred over the long form because it saves time and clearly shows the valence shell.
How to Use This Configuration
Knowing tungsten’s electron configuration helps predict its chemical behavior:
- Oxidation states: The 6 valence electrons (5d46s2) can all be lost, giving a maximum oxidation state of +6, which is the most common in compounds like tungsten trioxide (WO3) and tungstic acid (H2WO4).
- Metallic bonding: The partially filled 5d band contributes to tungsten’s very high melting point (3422 °C), the highest of all metals, and its high density (19.25 g/cm3).
- Catalysis: Tungsten compounds, such as tungsten disulfide (WS2), are used as catalysts in hydrodesulfurization and other reactions, relying on the ability of W to adopt multiple oxidation states.
- Alloys: Tungsten is a key component of high-speed steel and superalloys, where its electron configuration allows strong interatomic bonding.
Comparison with Neighboring Elements
Tungsten sits between tantalum (Ta, Z=73) and rhenium (Re, Z=75) in period 6. Tantalum has [Xe] 4f14 5d3 6s2 (5 valence electrons), while rhenium has [Xe] 4f14 5d5 6s2 (7 valence electrons). The trend shows a gradual increase in d electrons across the series, but with a notable anomaly: tungsten has 4 d electrons, not 5, because the 6s orbital is stabilized. This is in contrast to molybdenum (Mo, Z=42), which has [Kr] 4d5 5s1, a half-filled d subshell. The difference arises from the larger 5d orbitals and relativistic effects that are more pronounced for tungsten.
Practical Applications and Context
Tungsten’s electron configuration explains its use in:
- Lighting: Tungsten filaments in incandescent bulbs operate at high temperatures without melting, due to the strong metallic bonds from the 5d electrons.
- Electronics: Tungsten is used in integrated circuits as a contact and interconnect material because of its low thermal expansion and good conductivity.
- Radiation shielding: Its high density and atomic number make it effective at absorbing X-rays and gamma rays.
- Chemistry: Tungsten forms polyoxometalates and is used in organic synthesis as a catalyst (e.g., tungsten hexachloride).
The configuration also explains why tungsten is a transition metal, with partially filled d orbitals that allow variable oxidation states and the formation of colored compounds.
Frequently Asked Questions
Q: What is the full electron configuration of tungsten?
A: The full configuration is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 4f14 5d4 6s2. The shorthand uses [Xe] for the xenon core.
Q: How many valence electrons does tungsten have?
A: Tungsten has 6 valence electrons: 4 in the 5d subshell and 2 in the 6s subshell. These are the electrons available for bonding and determine its common oxidation state of +6.
Q: Why is tungsten’s configuration an exception to the Aufbau principle?
A: The Aufbau principle predicts 5d56s1 (half-filled d subshell), but the actual configuration is 5d46s2. This is due to relativistic effects that stabilize the 6s orbital, making it lower in energy than the 5d orbital. The energy gain from a half-filled 5d subshell is not enough to overcome the extra stability of a filled 6s subshell.
Q: What is the electron configuration of W3+?
A: When tungsten loses three electrons, they are removed from the outermost orbitals first: 6s2 then one 5d electron. So W3+ has [Xe] 4f14 5d3. Note that the 4f electrons are core and are not removed.
Q: Is tungsten’s configuration the same as molybdenum’s?
A: No. Molybdenum (Mo, Z=42) has [Kr] 4d55s1, while tungsten has [Xe] 4f145d46s2. They are in the same group but differ due to the presence of the 4f subshell and relativistic effects in tungsten.
Related
Formula used
in el | Atomic number Z | - | 74 | 1 | 118 out config | Electron configuration | - | config(Z) | 0 out valence | Valence electrons | - | valence(Z) | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED