molecalculator

Moles & Molar Mass

Electron Configuration Cheat Sheet: How to Write Any

Calculator No. 01-10197 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

An electron configuration cheat sheet is a quick-reference tool that shows how electrons fill an atom’s orbitals, written in the standard notation (like 1s² 2s² 2p⁶) plus the short-hand noble gas form. This guide explains the rules, the filling order, and the common exceptions so you can write any configuration from hydrogen to oganesson without memorizing every element.

Formula

The configuration is built by applying three rules in order:

  • Aufbau principle: electrons fill orbitals from lowest to highest energy. The order is: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.
  • Pauli exclusion principle: each orbital holds at most two electrons, and they must have opposite spins.
  • Hund’s rule: within a subshell (p, d, f), electrons fill each orbital singly before pairing up.

The notation lists the principal quantum number (n), the subshell letter (s, p, d, f), and a superscript showing how many electrons are in that subshell. The total of all superscripts must equal the atomic number Z. For the noble gas shorthand, you write the symbol of the preceding noble gas in brackets, then continue with the remaining orbitals.

Worked Example

Take iron, Z = 26, the default in the calculator. Count electrons as you fill orbitals:

  1. 1s² holds 2 electrons (total 2)
  2. 2s² holds 2 (total 4)
  3. 2p⁶ holds 6 (total 10)
  4. 3s² holds 2 (total 12)
  5. 3p⁶ holds 6 (total 18)
  6. 4s² holds 2 (total 20)
  7. 3d⁶ holds 6 (total 26)

So the full configuration is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁶. The preceding noble gas is argon (Z = 18), so the shorthand is [Ar] 4s² 3d⁶. The calculator returns exactly this.

Assumptions

  • The Aufbau filling order applies to ground-state (lowest energy) atoms.
  • Orbital energies follow the standard (n + l) rule; exceptions exist for some transition metals and lanthanides.
  • The noble gas shorthand uses the nearest noble gas with a lower atomic number.
  • This method gives the electron configuration, not the actual orbital occupancy for ions or excited states.

How to Read the Notation

Each term like 3p⁶ has three parts: the number (3) is the energy level or shell, the letter (p) is the subshell type, and the superscript (6) is the electron count in that subshell. The subshell letters come from spectroscopy: s (sharp), p (principal), d (diffuse), f (fundamental). The maximum electrons per subshell are s = 2, p = 6, d = 10, f = 14, which correspond to 1, 3, 5, and 7 orbitals respectively, each holding two electrons.

When you see [Ne] 3s¹ for sodium, it means the electron configuration is identical to neon (1s² 2s² 2p⁶) plus one electron in the 3s orbital. This shorthand saves space and instantly shows the valence electrons, which are the ones in the outermost shell that participate in bonding.

Common Mistakes and Misconceptions

The most frequent error is writing 3d before 4s. Even though 3d is numerically lower, 4s has a lower energy and fills first. However, when ions form, electrons are removed from the 4s orbital before the 3d. For example, iron(II) is [Ar] 3d⁶, not [Ar] 4s² 3d⁴.

Another misconception is that the Aufbau order is a strict vertical column. The diagonal rule (Madelung rule) is a memory aid: follow the diagonals from top right to bottom left. It works for most elements but fails for about 20 exceptions, notably chromium ([Ar] 4s¹ 3d⁵) and copper ([Ar] 4s¹ 3d¹⁰), where a half-filled or fully filled d subshell is more stable than the predicted configuration.

Students also confuse the total electron count with the period number. The period tells you the highest principal quantum number used, but not the total electrons. Period 4 elements can have up to 36 electrons (krypton), not just 4.

How to Choose the Right Notation

For most homework and exams, the full configuration is expected for elements up to about krypton (Z = 36). Beyond that, the noble gas shorthand is standard because the full form becomes unwieldy. For example, gold (Z = 79) full configuration is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d¹⁰ 5p⁶ 6s¹ 4f¹⁴ 5d¹⁰, but the shorthand [Xe] 4f¹⁴ 5d¹⁰ 6s¹ is far more practical.

When predicting chemical behavior, focus on the valence shell. The group number (for main-group elements) matches the number of valence electrons. For transition metals, the d electrons are also involved in bonding, which is why iron can form +2 and +3 ions.

Exceptions and Real-World Context

The Aufbau principle is a useful model, but it is not a law of nature. Actual orbital energies depend on the nuclear charge and electron-electron repulsion, which is why chromium and copper deviate. The lanthanides and actinides have even more irregularities due to the similar energies of the 4f, 5d, and 6s orbitals. For example, cerium is [Xe] 4f¹ 5d¹ 6s², not [Xe] 4f² 6s².

These configurations are determined experimentally through spectroscopy, not predicted from first principles. The periodic table itself is organized by electron configuration, which explains the block structure: s-block (groups 1-2), p-block (groups 13-18), d-block (transition metals), and f-block (lanthanides and actinides). Knowing the configuration lets you predict ionization energies, atomic radii, and magnetic properties. For instance, elements with unpaired d electrons are paramagnetic, while those with all paired electrons are diamagnetic.

Frequently Asked Questions

Why is 4s written before 3d in the configuration? Because 4s has a lower energy than 3d for neutral atoms, so it fills first according to the Aufbau principle. The energy ordering is determined by the (n + l) rule: 4s has n + l = 4 + 0 = 4, while 3d has n + l = 3 + 2 = 5, so 4s is lower.

How do I write the configuration for an ion? Remove electrons from the highest energy orbital first, which is the one with the largest principal quantum number. For transition metals, remove s electrons before d electrons. For example, Fe²⁺ (Z = 26) loses two 4s electrons to give [Ar] 3d⁶. For anions, add electrons to the next available orbital in the Aufbau order.

What is the difference between electron configuration and orbital diagram? An orbital diagram shows each orbital as a box and each electron as an arrow, indicating spin. The configuration only lists subshells and counts. The diagram is more detailed because it shows unpaired electrons and obeys Hund’s rule visually, which matters for predicting magnetism.

Why does chromium have [Ar] 4s¹ 3d⁵ instead of [Ar] 4s² 3d⁴? A half-filled d subshell (5 electrons in 5 orbitals) is unusually stable due to exchange energy and reduced electron-electron repulsion. The energy cost of promoting one 4s electron to 3d is small, and the stability gain makes the configuration lower in total energy. Copper shows the same effect with a fully filled d subshell.

Can I use this cheat sheet for elements beyond 118? The Aufbau order extends to 7p, but elements beyond oganesson (Z = 118) are not yet synthesized or have unknown configurations. The predicted order would continue with 8s, 5g, and so on, but relativistic effects become significant and the simple rules break down.

Is the configuration the same as the ground state always? Yes, the configuration given by the Aufbau principle represents the lowest energy arrangement for a neutral atom in its ground state. Excited states have electrons in higher orbitals, which is how atomic emission spectra are produced. The ground-state configuration is what the periodic table and most chemistry references use.

Related

Formula used
in z | Atomic number Z | - | 26 | 1 | 118
out config | Full electron configuration | - | "1s2 2s2 2p6 3s2 3p6 4s2 3d6" | 0
out noble | Noble gas shorthand | - | "[Ar] 4s2 3d6" | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →