The electron configuration for ytterbium (Yb, atomic number 70) is [Xe] 4f14 6s2. In full, it is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 4f14 5d0 6s2. This arrangement places ytterbium in the lanthanide series, with a completely filled 4f subshell, which strongly influences its chemistry and its common +2 and +3 oxidation states.
Formula
The electron configuration is built by filling atomic orbitals in order of increasing energy, following the Aufbau principle, Hund’s rule, and the Pauli exclusion principle. For ytterbium (Z = 70), the order of orbital filling is:
1s → 2s → 2p → 3s → 3p → 4s → 3d → 4p → 5s → 4d → 5p → 6s → 4f → 5d
Each orbital holds a maximum number of electrons: s = 2, p = 6, d = 10, f = 14. The sum of the superscripts must equal the atomic number (70). The condensed form uses the previous noble gas core, xenon ([Xe], Z = 54), to represent the 54 inner electrons, leaving 16 electrons to place in the 4f and 6s orbitals.
Worked Example
Using the default atomic number Z = 70:
- Start with the noble gas core: xenon (Z = 54) accounts for 54 electrons.
- Remaining electrons: 70 − 54 = 16.
- Fill the 6s orbital (2 electrons): 6s2.
- Fill the 4f subshell (14 electrons): 4f14.
- Total: 54 + 2 + 14 = 70 electrons.
Thus the configuration is [Xe] 4f14 6s2, which matches the calculator output.
Assumptions
- The configuration follows the standard Aufbau order for neutral, ground-state atoms.
- No exceptions apply for ytterbium (unlike chromium or copper, which have anomalous configurations).
- The noble gas core [Xe] is assumed to be complete and unchanged.
Why Ytterbium Has That Configuration
Ytterbium sits in period 6, group 3 (often counted as a lanthanide). After the 6s orbital fills (2 electrons), the 4f subshell fills with 14 electrons. For ytterbium, the 4f subshell is exactly half-full (7 electrons) at europium (Z = 63) and completely full at ytterbium (Z = 70). The 5d orbital remains empty in the ground state because the 4f electrons are lower in energy and fill first. This full 4f shell gives ytterbium a relatively stable electronic configuration, which explains why it is one of the few lanthanides that commonly forms a +2 oxidation state (by losing the two 6s electrons) in addition to the typical +3 state (losing two 6s and one 4f electron).
How to Read the Configuration
The superscripts tell you how many electrons occupy each subshell. For Yb:
- Core electrons (54): represented by [Xe] – these are not chemically active.
- Valence electrons (16): the 4f14 and 6s2 electrons. The 6s electrons are the most loosely held and are lost first when forming ions.
- Ion formation: Yb2+ has configuration [Xe] 4f14 (loses 6s2); Yb3+ has [Xe] 4f13 (loses 6s2 and one 4f).
The full configuration is long, so the noble gas shorthand is almost always used in textbooks and databases.
Common Mistakes and Misconceptions
- Writing 5d1 instead of 4f14: Some sources incorrectly place an electron in 5d before filling 4f, but for ytterbium the 4f subshell fills completely before 5d is used.
- Using [Kr] instead of [Xe]: The core is xenon (Z=54), not krypton (Z=36).
- Forgetting the 6s2: Even though 4f fills after 6s in the Aufbau order, the 6s electrons are still present and must be included.
- Assuming Yb has an anomalous configuration: Unlike chromium or copper, ytterbium does not have a half-filled or fully-filled d orbital exception; it follows the expected order.
Why It Matters in Chemistry
The electron configuration explains several observed properties of ytterbium:
- Oxidation states: The stability of the filled 4f shell makes the +2 state (Yb2+) more accessible than for most lanthanides. Yb2+ behaves similarly to an alkaline earth metal ion.
- Magnetism: Yb3+ has one unpaired 4f electron (4f13), making it paramagnetic. Yb2+ has no unpaired electrons and is diamagnetic.
- Spectroscopy: The energy gap between 4f levels gives ytterbium sharp absorption and emission lines, useful in lasers and phosphors.
- Atomic radius: The lanthanide contraction (poor shielding by 4f electrons) makes Yb smaller than expected, affecting its alloy behavior.
Comparison with Neighboring Elements
Ytterbium (Z=70) is preceded by thulium (Tm, Z=69, [Xe] 4f13 6s2) and followed by lutetium (Lu, Z=71, [Xe] 4f14 5d1 6s2). The transition from Yb to Lu is notable because lutetium places the extra electron in the 5d orbital, not the 4f, which is why lutetium is sometimes classified as a group 3 element rather than a lanthanide. Ytterbium’s filled 4f shell makes it chemically similar to calcium or strontium in some respects, but its higher nuclear charge leads to smaller ionic radii and different coordination preferences.
Practical Uses of the Configuration
Knowing Yb’s configuration helps predict its behavior in materials science and spectroscopy:
- Laser crystals: Yb-doped crystals (e.g., Yb:YAG) rely on the 4f13 ↔ 4f14 transition for efficient, high-power lasers.
- Atomic clocks: Yb+ ions have optical transitions that are extremely stable, used in next-generation timekeeping.
- Alloying: Yb is added to some stainless steels and aluminum alloys to improve strength and corrosion resistance.
- Nuclear applications: Yb isotopes are used in radiation sources and as a neutron absorber in some reactor designs.
Frequently Asked Questions
What is the full electron configuration of ytterbium?
The full configuration is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 4f14 5d0 6s2. The shorthand is [Xe] 4f14 6s2.
Why is ytterbium’s configuration written with 4f14 and not 5d2?
Because the 4f subshell is lower in energy than the 5d subshell for lanthanides, so it fills first. Ytterbium has exactly 14 electrons to complete the 4f subshell, leaving the 5d empty.
How many valence electrons does ytterbium have?
Strictly, the valence electrons are the 6s2 electrons, since they are the highest in energy and participate in bonding. The 4f electrons are considered core-like in most chemical contexts, though they can be involved in some spectroscopic transitions.
What is the electron configuration of Yb3+?
Yb3+ has lost the two 6s electrons and one 4f electron, giving [Xe] 4f13. This leaves one unpaired electron, making Yb3+ paramagnetic.
Is ytterbium an exception to the Aufbau principle?
No. Ytterbium follows the Aufbau principle exactly. The only common exceptions are elements like chromium and copper where a half-filled or fully-filled d subshell is achieved by promoting an s electron.
Why is ytterbium’s +2 oxidation state more common than for other lanthanides?
Because losing the two 6s electrons leaves a completely filled 4f14 configuration, which is exceptionally stable. This stability is similar to the filled-shell stability seen in noble gases.
Related
Formula used
in z | Atomic number (Z) | - | 70 | 1 | 118 out config | Electron configuration | - | "1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 4f14 5d0 6s2" | 0 out core | Noble gas core | - | "[Xe]" | 0 out valence | Valence subshells | - | "4f14 6s2" | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED