Electron configuration is the distribution of electrons among the atomic orbitals of an atom or ion. It shows, in a standardized notation, which energy levels, subshells, and orbitals are occupied by electrons, and how many electrons occupy each. This arrangement determines the chemical behavior, bonding, and physical properties of the element.
Formula
The electron configuration is not computed by a single algebraic formula; it follows the aufbau principle, which fills orbitals in order of increasing energy. The order is:
1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p, …
Each subshell holds a fixed maximum number of electrons:
- s subshell: 2 electrons (1 orbital)
- p subshell: 6 electrons (3 orbitals)
- d subshell: 10 electrons (5 orbitals)
- f subshell: 14 electrons (7 orbitals)
The notation lists the principal quantum number (n), the subshell letter (s, p, d, f), and a superscript equal to the number of electrons in that subshell. For example, the configuration of neon (10 electrons) is 1s2 2s2 2p6.
Worked Example
Write the electron configuration for chlorine (atomic number 17).
- Count electrons: 17.
- Fill in order: 1s2 (2 electrons), 2s2 (4 total), 2p6 (10 total), 3s2 (12 total), 3p5 (17 total).
- Write the full configuration: 1s2 2s2 2p6 3s2 3p5.
- Check: 2 + 2 + 6 + 2 + 5 = 17 electrons.
The shorthand uses the previous noble gas, neon, as a core: [Ne] 3s2 3p5.
Assumptions
- The aufbau order applies to ground-state neutral atoms.
- Hund’s rule is followed: electrons fill degenerate orbitals singly before pairing.
- The Pauli exclusion principle holds: no two electrons in an atom share all four quantum numbers.
- For transition metals and lanthanides, the actual ground state may differ slightly from the simple aufbau prediction due to electron–electron repulsion and exchange energy.
Why Electron Configuration Matters
The configuration explains the periodic table’s structure. Elements in the same group have the same outer (valence) electron configuration, which gives them similar chemical reactivity. For example, all alkali metals (Li, Na, K) end in s1, so they readily lose one electron to form +1 ions. The noble gases end in s2p6 (except He, which is s2), making them chemically inert because their valence shells are full.
Knowing the configuration also predicts:
- Common oxidation states (e.g., iron’s [Ar] 3d6 4s2 explains Fe2+ and Fe3+)
- Magnetic properties (unpaired d electrons give paramagnetism)
- Color of transition metal compounds (d–d transitions)
- Ionization energy trends and atomic radius trends
How to Write Any Configuration
Follow these steps for a neutral atom:
- Find the atomic number Z on the periodic table – that is the number of electrons.
- Fill subshells in the aufbau order until all electrons are placed.
- Stop when the superscripts sum to Z.
- For shorthand, replace the noble gas core with its symbol in brackets.
For ions, adjust the electron count first: add electrons for a negative charge, subtract for a positive charge. Then fill the same way. For example, O2− has 8 + 2 = 10 electrons, so its configuration is the same as neon: 1s2 2s2 2p6.
For transition metal cations, remove electrons from the 4s subshell before the 3d. Thus Fe2+ (Z=26, 24 electrons) is [Ar] 3d6, not [Ar] 3d4 4s2.
Common Mistakes and Exceptions
- Wrong order for d and f blocks: 4s fills before 3d, but 4s empties before 3d when forming cations.
- Ignoring exceptions: Chromium (Cr) is [Ar] 3d5 4s1, not 3d4 4s2. Copper (Cu) is [Ar] 3d10 4s1. These arise from the extra stability of half-filled and fully filled d subshells.
- Overcounting electrons: Always sum the superscripts to verify the total equals Z (or Z − charge for ions).
- Using the wrong noble gas core: For period 4 elements, use [Ar]; for period 5, [Kr]; for period 6, [Xe]; for period 7, [Rn].
Orbital Diagrams and Quantum Numbers
An orbital diagram uses boxes (orbitals) and arrows (electrons) to show spin. Each box holds two arrows of opposite spin (↑↓). Hund’s rule says to place one arrow in each degenerate orbital before pairing. For carbon (1s2 2s2 2p2), the two 2p electrons occupy two different p orbitals with parallel spins.
The four quantum numbers describe each electron:
- Principal (n): energy level (1, 2, 3, …)
- Azimuthal (l): subshell type (0 = s, 1 = p, 2 = d, 3 = f)
- Magnetic (ml): orbital orientation (−l to +l)
- Spin (ms): +½ or −½
No two electrons in an atom can have the same set of four quantum numbers (Pauli exclusion principle).
Frequently Asked Questions
What is the difference between electron configuration and valence electrons?
Electron configuration lists all electrons in every occupied subshell. Valence electrons are only the electrons in the outermost shell (highest n), which participate in bonding. For example, sodium’s full configuration is 1s2 2s2 2p6 3s1; its valence electron is the single 3s electron.
Why does 4s fill before 3d?
In the ground state, the 4s orbital has a slightly lower energy than the 3d orbital for neutral atoms, so it fills first. However, when ionizing transition metals, the 4s electrons are removed first because the 3d electrons are closer to the nucleus and hold more tightly once the 4s is filled.
How do I write the configuration for an ion?
Start with the neutral atom’s configuration, then add or remove electrons from the highest-energy occupied subshell. For anions, add electrons to the outermost p or s subshell. For cations, remove electrons from the highest n first – for transition metals, remove from 4s before 3d.
What does the superscript mean in 2p6?
The superscript is the number of electrons in that subshell. 2p6 means six electrons occupy the three 2p orbitals, with two electrons in each orbital.
Are there exceptions to the aufbau principle?
Yes. About 20 elements, mostly transition metals and lanthanides, have configurations that differ from the simple aufbau order. Common examples are Cr, Cu, Nb, Mo, Ru, Rh, Pd, Ag, Pt, and Au. These are due to the extra stability of half-filled or fully filled d and f subshells.
How does electron configuration relate to the periodic table?
The periodic table is arranged by increasing atomic number, and the block structure (s, p, d, f) reflects the subshell being filled. The group number (for main-group elements) equals the number of valence electrons, and the period number equals the highest principal quantum number n.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED