The electron configuration of iodine (element 53) is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p5, often abbreviated as [Kr] 4d10 5s2 5p5. This arrangement places seven valence electrons in the fifth shell (5s2 5p5), which is why iodine is a halogen that forms one negative ion (I⁻) and participates in one covalent bond.
Formula
The electron configuration is built by filling atomic orbitals in order of increasing energy, following the Aufbau principle, Hund’s rule, and the Pauli exclusion principle. The order of filling is:
- 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p
For iodine (Z = 53), the electrons are distributed as:
- 1s2 (2 electrons)
- 2s2 2p6 (8 electrons)
- 3s2 3p6 3d10 (18 electrons)
- 4s2 4p6 4d10 (18 electrons)
- 5s2 5p5 (7 electrons)
Sum: 2 + 8 + 18 + 18 + 7 = 53 electrons. The abbreviation [Kr] stands for the 36 electrons of krypton (the noble gas before iodine), leaving 17 electrons to write explicitly: 4d10 5s2 5p5.
Worked Example
Using the calculator with the default atomic number 53:
- Start with the lowest energy orbital: 1s holds 2 electrons → 1s2 (2 used).
- 2s holds 2 → 2s2 (4 total).
- 2p holds 6 → 2p6 (10 total).
- 3s holds 2 → 3s2 (12 total).
- 3p holds 6 → 3p6 (18 total).
- 4s fills before 3d → 4s2 (20 total).
- 3d holds 10 → 3d10 (30 total).
- 4p holds 6 → 4p6 (36 total – this is krypton).
- 5s holds 2 → 5s2 (38 total).
- 4d holds 10 → 4d10 (48 total).
- 5p holds 5 → 5p5 (53 total – all electrons placed).
The result is exactly the configuration given above. The valence electrons are the 5s2 5p5 electrons – 7 in total.
Assumptions
- The Aufbau order applies to neutral, ground-state atoms.
- Orbital energies are those of the isolated atom; actual energies shift in compounds or ions.
- The calculator assumes no exceptions for iodine – none exist (iodine follows the standard order).
Why Iodine’s Configuration Matters
The seven valence electrons explain iodine’s chemistry. It needs one more electron to complete the 5p subshell (octet), so it readily gains an electron to form the iodide ion I⁻. This is why iodine forms ionic compounds with metals (e.g., KI) and why it is a diatomic molecule I₂ – two iodine atoms share one pair of electrons to complete each other’s octets. The 4d10 electrons are core electrons and do not participate in bonding under normal conditions.
Iodine is the heaviest stable halogen. Because the 5p orbitals are larger and more diffuse than those of lighter halogens, iodine’s electronegativity (2.66 on the Pauling scale) is lower than that of chlorine (3.16) or bromine (2.96). This affects the polarity of iodine-containing bonds and the strength of hydrogen iodide as an acid – HI is a stronger acid than HCl because the H–I bond is weaker.
How to Read the Configuration
Each part of the notation has a specific meaning:
- Principal quantum number (1, 2, 3, 4, 5) – the electron shell (energy level).
- Subshell letter (s, p, d, f) – the shape of the orbital (s = sphere, p = dumbbell, d = cloverleaf, f = complex).
- Superscript – the number of electrons in that subshell.
For iodine, the highest occupied shell is n = 5, so the period number is 5. The last electron enters the 5p subshell, placing iodine in the p-block, group 17 (halogens).
Common Mistakes and Misconceptions
- Writing 5s2 4d10 5p5 – the correct order is 4d before 5p, but many write 5s then 5p, skipping 4d. Always include 4d10.
- Forgetting the 4d electrons – some abbreviated forms only show [Kr] 5s2 5p5, which is incomplete because it omits the 4d10 electrons that are not core (they are not part of the noble gas core). The correct abbreviated form is [Kr] 4d10 5s2 5p5.
- Counting valence electrons as 5 – the 5p has 5 electrons, but the 5s has 2, so total valence electrons = 7, not 5.
- Assuming iodine follows an exception – unlike chromium or copper, iodine does not have a half-filled d subshell anomaly. It follows the standard order exactly.
Iodine’s Ion and Oxidation States
When iodine gains one electron, it becomes the iodide ion I⁻ with the configuration [Kr] 4d10 5s2 5p6, which is isoelectronic with xenon (Z = 54). This filled-shell configuration is highly stable, which is why I⁻ is common in salts.
Iodine can also lose electrons or share them in higher oxidation states, such as +1, +3, +5, and +7 (e.g., in IO⁻, IO3⁻, and IO4⁻). These positive states involve the 5s and 5p electrons, and sometimes the 4d electrons are considered in bonding models, though the 4d are usually core. The existence of +7 oxidation state (periodic acid, H5IO6) shows that iodine can expand its octet, unlike fluorine.
How to Find It Yourself
If you need to write the configuration for any element, follow these steps:
- Find the atomic number on the periodic table (for iodine, 53).
- Use the Aufbau order to fill orbitals until you’ve placed all electrons.
- Check the sum of superscripts equals the atomic number.
- For the abbreviated form, locate the noble gas at the end of the previous period (krypton, Z = 36) and put its symbol in brackets, then continue from the next orbital (4d).
This method works for all elements. For transition metals and lanthanides, you may need to remember exceptions (e.g., Cr, Cu, Nb, Mo, Ru, Rh, Pd, Ag, Pt, Au, and many f-block elements).
Frequently Asked Questions
What is the shorthand electron configuration for iodine?
The shorthand is [Kr] 4d10 5s2 5p5. The [Kr] represents the 36 electrons of krypton, and the remaining 17 electrons are written explicitly.
How many valence electrons does iodine have?
Iodine has 7 valence electrons – 2 in the 5s subshell and 5 in the 5p subshell. This is typical for halogens and explains why iodine forms one bond or gains one electron to achieve an octet.
Why is iodine’s configuration sometimes written with 4d10 before 5s2?
In the Aufbau order, 4d fills after 5s, but when writing the configuration, subshells are often listed in order of increasing principal quantum number (n), which places 4d before 5s. Both notations are acceptable, but the most common textbook order is 4d10 5s2 5p5.
Does iodine have an exception like chromium or copper?
No. Iodine follows the standard Aufbau order without any half-filled or fully-filled d subshell anomaly. Its configuration is completely regular.
What is the electron configuration of the iodide ion (I⁻)?
The iodide ion has 54 electrons, so its configuration is [Kr] 4d10 5s2 5p6, which is identical to xenon’s configuration. This filled octet makes I⁻ very stable.
How does iodine’s configuration affect its position in the periodic table?
The highest occupied shell (n = 5) places iodine in period 5. The last electron enters the 5p subshell, placing it in group 17 (halogens). The 7 valence electrons are the defining feature of the halogen group.
Related
Formula used
in z | Atomic number | - | 53 | 1 | 118 out ec | Full electron configuration | - | shellfill(z) | 0 out v | Valence electrons | - | valence(z) | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED