molecalculator

Moles & Molar Mass

Electron Configuration of Cl (Chlorine)

Calculator No. 01-10698 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The electron configuration of chlorine (Cl) is 1s2 2s2 2p6 3s2 3p5, or in condensed form, [Ne] 3s2 3p5. This arrangement of its 17 electrons explains chlorine’s position in Group 17 of the periodic table and its strong tendency to gain one electron to form the chloride ion (Cl⁻), achieving a stable noble-gas configuration.

Formula and Notation

The electron configuration is built by filling atomic orbitals in order of increasing energy, following the Aufbau principle. The order of filling is: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p. Each orbital holds a maximum of two electrons (Pauli exclusion principle), and electrons fill degenerate orbitals singly before pairing (Hund’s rule).

For chlorine (Z = 17), the filling sequence is:

  • 1s: 2 electrons
  • 2s: 2 electrons
  • 2p: 6 electrons
  • 3s: 2 electrons
  • 3p: 5 electrons (the last 5 of the 7 available)

Total: 2 + 2 + 6 + 2 + 5 = 17 electrons. The condensed notation uses the preceding noble gas (neon, [Ne], which has 10 electrons) as a shorthand: [Ne] 3s2 3p5.

Worked Example

Let’s build the configuration step by step for chlorine (Z = 17):

  1. Start with the 1s orbital: 1s2 (2 electrons used, 15 remaining)
  2. Fill 2s: 2s2 (2 used, 13 remaining)
  3. Fill 2p: 2p6 (6 used, 7 remaining)
  4. Fill 3s: 3s2 (2 used, 5 remaining)
  5. Fill 3p: 3p5 (5 used, 0 remaining)

Result: 1s2 2s2 2p6 3s2 3p5. The calculator above returns this for the default Z = 17.

Valence Electrons and Chemical Behavior

Chlorine has 7 valence electrons (the 3s and 3p electrons). This is one short of a full octet. In chemical reactions, chlorine atoms tend to gain one electron to form the chloride ion (Cl⁻), which has the electron configuration of argon: [Ne] 3s2 3p6. This explains chlorine’s high electronegativity (3.16 on the Pauling scale) and its role as a strong oxidizing agent.

The 3p orbital has 5 electrons, meaning there is one unpaired electron in one of the three 3p orbitals. This makes chlorine a free radical in its atomic form, which is why Cl atoms are highly reactive and exist as diatomic molecules (Cl2) under standard conditions.

Common Mistakes and Misconceptions

  • Confusing 3p5 with 3p6: Some students write 3p6 for chlorine, but that would be argon (Z = 18). Chlorine has 5 electrons in 3p, not 6.
  • Forgetting the 3s before 3p: The 3s subshell fills before 3p, so the order is 3s2 3p5, not 3p7 (which doesn’t exist).
  • Using the wrong noble-gas core: For chlorine, the core is [Ne], not [Ar]. [Ar] would be for elements in the fourth period.
  • Mixing up atomic number and mass number: Chlorine has atomic number 17, but its most common isotope has mass number 35 (17 protons + 18 neutrons). The electron configuration depends only on the atomic number.

Comparison with Neighbors

Chlorine sits between sulfur (Z = 16) and argon (Z = 18) in the third period. Sulfur has the configuration [Ne] 3s2 3p4, with 6 valence electrons, and tends to gain two electrons to form S²⁻. Argon has [Ne] 3s2 3p6, a full octet, making it chemically inert. Chlorine’s one-electron deficit makes it more reactive than sulfur but less reactive than fluorine (Z = 9), which is in the same group but has the configuration [He] 2s2 2p5.

The trend down Group 17 (halogens) is increasing atomic radius and decreasing electronegativity, which is why fluorine is the most reactive halogen, while iodine (Z = 53) is less reactive. Chlorine’s configuration is typical of a halogen: one electron short of a noble gas.

Exceptions and Limits of the Aufbau Principle

The Aufbau principle works perfectly for chlorine, but it has notable exceptions for transition metals and some heavier elements. For example, chromium (Z = 24) has the configuration [Ar] 3d5 4s1 instead of the expected [Ar] 3d4 4s2, because a half-filled d subshell is more stable. Copper (Z = 29) similarly has [Ar] 3d10 4s1. These exceptions arise from the similar energies of the 3d and 4s orbitals and the stability of half-filled or fully filled subshells.

For chlorine, no such exceptions occur. The 3p subshell is not half-filled (it has 5 of 6 electrons), so the standard filling order applies. However, when chlorine forms the chloride ion, the added electron goes into the 3p orbital, completing the octet.

Applications of Chlorine’s Configuration

Chlorine’s electron configuration is central to many real-world applications:

  • Water purification: Chlorine’s oxidizing power (due to its electron affinity) is used to disinfect drinking water and swimming pools. The Cl₂ molecule reacts with water to form hypochlorous acid (HOCl), which kills bacteria.
  • PVC production: Polyvinyl chloride (PVC) is made from vinyl chloride monomer, which contains chlorine. The stability of the C–Cl bond is a result of the electronegativity of chlorine.
  • Bleaching agents: Sodium hypochlorite (NaOCl) relies on chlorine’s ability to accept electrons and oxidize colored compounds.
  • Pharmaceuticals and agrochemicals: Many drugs and pesticides contain chlorine atoms, which modify the electronic properties of organic molecules.

In all these cases, the behavior stems from chlorine’s 7 valence electrons and its strong tendency to gain one more.

Frequently Asked Questions

Why is chlorine’s electron configuration written as [Ne] 3s² 3p⁵?
The [Ne] core represents the 10 electrons that fill the 1s, 2s, and 2p orbitals, which are identical to the configuration of neon (Z = 10). The remaining 7 electrons are in the third shell: 2 in 3s and 5 in 3p. This shorthand saves space and highlights the valence electrons.

How many valence electrons does chlorine have?
Chlorine has 7 valence electrons (2 in 3s + 5 in 3p). This is why it is in Group 17 of the periodic table. It needs one more electron to achieve a stable octet, so it typically forms one bond or gains one electron.

What is the electron configuration of the chloride ion (Cl⁻)?
The chloride ion has 18 electrons (17 + 1 gained). Its configuration is 1s² 2s² 2p⁶ 3s² 3p⁶, which is identical to argon. This is a stable noble-gas configuration, which is why Cl⁻ is so common in salts like NaCl.

Why is chlorine a gas at room temperature while sodium is a solid?
Chlorine exists as diatomic Cl₂ molecules held together by a single covalent bond. The intermolecular forces between these nonpolar molecules are weak (London dispersion forces), so chlorine boils at -34 °C. Sodium, a metal, has strong metallic bonding, requiring much higher temperatures to melt (98 °C). The electron configuration determines the type of bonding.

Does chlorine follow the octet rule?
In most compounds, chlorine achieves an octet by gaining one electron (forming Cl⁻) or by sharing one electron in a covalent bond (e.g., in HCl). In some compounds like ClF₃ or ClF₅, chlorine can have more than 8 electrons in its valence shell because it has empty 3d orbitals available, but these are less common and involve heavier halogens.

How do I write the electron configuration for chlorine in an exam?
Start by identifying the atomic number (17). Then fill orbitals in order: 1s² 2s² 2p⁶ 3s² 3p⁵. If asked for the condensed form, use [Ne] 3s² 3p⁵. Always count the superscripts to ensure they sum to 17.

Related

Formula used
in n | Atomic number (Z) | - | 17 | 1 | 118
in e | Electron count | - | 17 | 1 | 118
out config | Electron configuration | - | (n==17 ? "1s2 2s2 2p6 3s2 3p5" : "Enter Z=17") | 0
out valence | Valence electrons | - | (n==17 ? 7 : 0) | 0
out core | Core electrons | - | (n==17 ? 10 : 0) | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →