molecalculator

Moles & Molar Mass

Electron Configuration of Fe Atom Explained

Guide 01-10762 · Updated · Step by step

The electron configuration of a neutral iron (Fe) atom is 1s2 2s2 2p6 3s2 3p6 3d6 4s2. This arrangement places 26 electrons in specific orbitals, with the 3d subshell partially filled and the 4s subshell fully occupied.

What the Configuration Means

Iron has atomic number 26, meaning a neutral atom contains 26 protons and 26 electrons. The configuration above shows how those electrons are distributed among the principal energy levels (n = 1, 2, 3, 4) and subshells (s, p, d). The superscripts indicate the number of electrons in each subshell:

  • 1s2: 2 electrons in the lowest energy s orbital
  • 2s2 2p6: 8 electrons in the second shell
  • 3s2 3p6: 8 electrons in the third shell’s s and p orbitals
  • 3d6: 6 electrons in the d subshell of the third shell
  • 4s2: 2 electrons in the fourth shell’s s orbital

Adding the superscripts: 2 + 2 + 6 + 2 + 6 + 6 + 2 = 26, which matches the atomic number. This configuration is often abbreviated using the noble gas core: [Ar] 3d6 4s2, where [Ar] represents the electron configuration of argon (1s2 2s2 2p6 3s2 3p6).

Order of Filling: The 4s vs 3d Question

A common point of confusion is why the 4s subshell is written before 3d in the full configuration, even though 3d has a lower principal quantum number. The order reflects the Aufbau principle, which states that electrons fill orbitals in order of increasing energy. For neutral atoms, the 4s orbital is slightly lower in energy than 3d, so it fills first. However, when writing the configuration, chemists conventionally list subshells in order of increasing principal quantum number (n), so 3d comes before 4s in the written form. This is why you see both 1s2 2s2 2p6 3s2 3p6 3d6 4s2 and [Ar] 4s2 3d6 in textbooks—both are correct, but the latter emphasizes the filling order.

Why Iron’s Configuration Is Special

Iron is a transition metal, and its electron configuration explains many of its chemical properties. The partially filled 3d subshell (with 6 electrons out of a maximum of 10) allows iron to exhibit multiple oxidation states, most commonly +2 and +3. When iron loses electrons to form ions, it loses the 4s electrons first, then 3d electrons. For example:

  • Fe2+: loses the two 4s electrons → [Ar] 3d6
  • Fe3+: loses two 4s and one 3d electron → [Ar] 3d5

The 3d5 configuration in Fe3+ is particularly stable because a half-filled d subshell (5 electrons) has extra stability due to exchange energy and symmetry. This explains why Fe3+ is a common and stable oxidation state in many compounds, such as iron(III) oxide (rust).

How to Determine the Configuration Yourself

If you need to write the electron configuration for iron or any element, follow these steps:

  1. Find the atomic number (Z) on the periodic table; for iron, Z = 26.
  2. Use the Aufbau diagram (or the diagonal rule) to list orbitals in order of increasing energy: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.
  3. Fill each orbital with the maximum number of electrons (s = 2, p = 6, d = 10, f = 14) until you reach 26 electrons.
  4. Write the configuration in order of increasing n, or use the noble gas shorthand.

For iron, the process yields: 1s2 (2), 2s2 (4), 2p6 (10), 3s2 (12), 3p6 (18), 4s2 (20), 3d6 (26). Stop there because you’ve placed all 26 electrons.

Common Misconceptions and Mistakes

Several errors frequently appear when students or enthusiasts write iron’s configuration:

  • Writing 3d8 instead of 3d6 4s2: Some think that because 3d is lower in energy after filling, it should get more electrons. But the Aufbau order is fixed: 4s fills before 3d, so iron gets 2 in 4s and 6 in 3d.
  • Forgetting the 4s electrons when forming ions: When writing Fe2+, many incorrectly remove a 3d electron first. In reality, the 4s electrons are removed first because they are the outermost and have higher n, making them easier to remove.
  • Confusing the order in the written configuration: Some write [Ar] 3d6 4s2 and think 3d is filled before 4s. The written order is just a convention; the filling order is 4s then 3d.
  • Using the wrong noble gas core: For iron, the core is argon (Z=18), not krypton (Z=36). Using [Kr] would add extra electrons that iron doesn’t have.

Another misconception is that the 4s orbital is always lower in energy than 3d for all elements. This is true for neutral atoms of the first transition series, but after the 3d subshell is partially filled, the relative energies shift. For ions, the 3d orbitals become lower in energy than 4s, which is why they are filled first in ions like Fe2+.

Real-World Relevance of Iron’s Configuration

Iron’s electron configuration is not just a theoretical exercise; it underpins many practical applications:

  • Magnetism: Iron is ferromagnetic because its 3d orbitals have four unpaired electrons (in the 3d6 configuration, Hund’s rule maximizes unpaired spins). These unpaired electrons align in domains, giving iron its magnetic properties used in motors, generators, and data storage.
  • Catalysis: The ability to switch between Fe2+ and Fe3+ makes iron a versatile catalyst in industrial processes like the Haber-Bosch synthesis of ammonia and in biological enzymes like cytochromes.
  • Color in gemstones: The presence of Fe2+ and Fe3+ in minerals like sapphires and rubies gives them their characteristic blue and red colors due to electron transitions in the d orbitals.
  • Corrosion: Rust formation involves the oxidation of Fe to Fe2+ and Fe3+, a process directly tied to its electron configuration and the stability of the 3d5 state.

Frequently Asked Questions

Why is iron’s configuration sometimes written as [Ar] 3d6 4s2 and sometimes as [Ar] 4s2 3d6?

Both notations are correct. The first lists subshells in order of increasing principal quantum number (3d before 4s), which is the standard for writing full configurations. The second reflects the order of filling (4s before 3d) and is often used when discussing ionization or chemical bonding. Textbooks may use either, so don’t be alarmed by the variation.

What is the electron configuration of Fe3+?

Fe3+ has 23 electrons (26 – 3). The configuration is [Ar] 3d5. The two 4s electrons and one 3d electron are removed, leaving a half-filled d subshell, which is unusually stable. This is why Fe3+ is a common oxidation state in compounds like FeCl3 and Fe2O3.

How many unpaired electrons does an iron atom have?

In the ground state, iron has 4 unpaired electrons. The 3d subshell has 6 electrons; according to Hund’s rule, they fill each of the five d orbitals singly before pairing. With 6 electrons, you get 4 unpaired (one orbital has a pair, four have single electrons). The 4s electrons are paired, so they don’t contribute to unpaired count.

Does iron’s configuration violate the Aufbau principle?

No, it follows the Aufbau principle perfectly. The 4s orbital is lower in energy than 3d for neutral atoms, so it fills first. The configuration [Ar] 3d6 4s2 is the predicted and observed ground state. Some elements like chromium and copper are exceptions, but iron is not one of them.

Why does iron lose 4s electrons before 3d when forming ions?

When electrons are removed to form cations, the outermost electrons (highest n) are removed first because they are farther from the nucleus and less tightly held. For iron, the 4s electrons have n=4, while 3d has n=3, so the 4s electrons are removed first. Additionally, after the 3d subshell is partially filled, its energy drops below that of 4s, making the 3d electrons more stable and harder to remove.

What is the noble gas shorthand for iron?

The shorthand is [Ar] 3d6 4s2, where [Ar] represents the electron configuration of argon (1s2 2s2 2p6 3s2 3p6). This abbreviation is commonly used to save space and highlight the valence electrons (4s2 and 3d6).

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →