Electron configuration practice means writing the distribution of electrons among the orbitals of an atom or ion, using the Aufbau principle, Pauli exclusion principle, and Hund’s rule. You enter an element’s atomic number (or symbol) and get the full electron configuration, plus the condensed noble-gas form and the number of unpaired electrons. This page explains the rules, walks through a worked example, and gives you a calculator to check your own answers.
Formula
The electron configuration is built by filling orbitals in order of increasing energy, following the Aufbau (building-up) principle. The order is: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p. Each orbital holds at most two electrons (Pauli exclusion principle), and for degenerate orbitals (like the three 2p orbitals), electrons occupy each orbital singly before pairing (Hund’s rule).
The notation n lelectrons means: principal quantum number n (shell), subshell letter l (s, p, d, f), and the superscript is the number of electrons in that subshell. For example, 2p3 means three electrons in the 2p subshell. The total electrons equal the atomic number Z for a neutral atom.
The noble-gas shorthand replaces the core configuration with the symbol of the preceding noble gas in brackets. For instance, [Ar] represents 1s2 2s2 2p6 3s2 3p6.
Worked Example
Let’s find the electron configuration for iron (Fe), atomic number 26. We fill orbitals in the Aufbau order:
- 1s2 (2 electrons, total 2)
- 2s2 (4)
- 2p6 (10)
- 3s2 (12)
- 3p6 (18)
- 4s2 (20)
- 3d6 (26)
So the full configuration is 1s2 2s2 2p6 3s2 3p6 4s2 3d6. The noble-gas shorthand is [Ar] 4s2 3d6. For unpaired electrons: the 4s subshell is full (0 unpaired), and the 3d subshell has 6 electrons. Following Hund’s rule, the five 3d orbitals each get one electron first (5 unpaired), then the sixth electron pairs with one, leaving 4 unpaired. The calculator shows 4 unpaired electrons, matching this reasoning.
Assumptions
- The configuration is for a neutral atom in its ground state.
- The Aufbau order is the standard one taught in introductory chemistry; exceptions (like Cr and Cu) are not handled by this simple rule.
- The noble-gas shorthand uses the nearest preceding noble gas (He, Ne, Ar, Kr, Xe, Rn, Og).
How to Practice Electron Configurations
Start with small atoms and work up. Write the configuration by hand, then check with the calculator. Focus on these steps:
- Memorize the orbital filling order (or use the diagonal rule / periodic table blocks).
- Count electrons: for a neutral atom, that’s the atomic number. For an ion, add electrons for negative charge, subtract for positive charge.
- Fill each subshell completely before moving to the next, except for the known exceptions (Cr, Cu, Ag, Au, and a few others) where a half-filled or fully filled d subshell is lower in energy.
- Write the noble-gas shorthand for atoms with Z > 10 to save time.
- Determine unpaired electrons by drawing box diagrams for the last partially filled subshell.
Practice with these common elements: O (Z=8), Cl (Z=17), K (Z=19), Fe (Z=26), Br (Z=35). For each, write the full configuration, the shorthand, and the number of unpaired electrons.
Common Mistakes and Misconceptions
One frequent error is writing 3d before 4s. In the ground state, 4s fills before 3d because the 4s orbital is lower in energy for neutral atoms. However, when ions form, electrons are removed from the 4s first, so Fe2+ is [Ar] 3d6, not [Ar] 4s2 3d4. Another mistake is forgetting Hund’s rule: for p3, all three electrons go into separate orbitals, not two in one and one in another. Also, the superscripts must sum to the total electrons; always add them up to check.
A common misconception is that the periodic table blocks exactly match the filling order. The s-block (groups 1-2) fills the ns orbital, the p-block fills np, the d-block fills (n-1)d, and the f-block fills (n-2)f. But the energy order is not strictly by principal quantum number; 4s is lower than 3d. Using the periodic table as a map works if you remember the n-1 and n-2 shifts.
How to Read the Result
The full configuration tells you exactly how many electrons are in each subshell. The noble-gas shorthand highlights the valence electrons (those in the highest principal quantum number and the partially filled d/f subshells). The number of unpaired electrons is crucial for predicting magnetic properties: substances with unpaired electrons are paramagnetic (attracted to a magnetic field), while those with all paired are diamagnetic. For example, Fe has 4 unpaired electrons, so it’s strongly paramagnetic. The configuration also explains periodic trends like ionization energy and atomic radius, because the outermost electrons determine chemical behavior.
Limits of the Aufbau Rule
The simple Aufbau order works for most elements but fails for about 20 transition metals and heavier elements. For instance, chromium (Z=24) is actually [Ar] 4s1 3d5, not [Ar] 4s2 3d4, because a half-filled d subshell is more stable. Copper (Z=29) is [Ar] 4s1 3d10. These exceptions arise from the small energy differences between 4s and 3d, and the extra stability of half-filled or fully filled subshells. For ions, the order can change; for example, transition metal ions lose s electrons before d electrons. The calculator here uses the standard Aufbau order, so it will not reproduce the exceptions; you should learn them separately.
Frequently Asked Questions
How do I write the electron configuration for an ion?
First write the configuration for the neutral atom, then add or remove electrons. For a cation (positive charge), remove electrons from the highest energy orbital first, which is typically the ns orbital before (n-1)d. For example, Fe (Z=26) is [Ar] 4s2 3d6; Fe3+ loses two 4s electrons and one 3d electron, giving [Ar] 3d5. For an anion (negative charge), add electrons to the next available orbital, following the Aufbau order.
Why is 4s filled before 3d?
For neutral atoms, the 4s orbital is lower in energy than the 3d orbital, so it fills first. This is because of electron shielding and penetration: the 4s electron penetrates closer to the nucleus than a 3d electron, experiencing a higher effective nuclear charge. However, once the 3d orbitals start filling, they become lower in energy than 4s, which is why transition metal ions lose 4s electrons first.
What are the exceptions to the Aufbau principle?
The most common exceptions are chromium (Cr), copper (Cu), silver (Ag), gold (Au), and molybdenum (Mo). In these, a half-filled or fully filled d subshell is more stable than the expected configuration. For example, Cr is [Ar] 4s1 3d5 and Cu is [Ar] 4s1 3d10. The energy difference is small, but the exchange energy and electron repulsion favor these arrangements. There are also exceptions in the lanthanides and actinides.
How do I count unpaired electrons from a configuration?
Draw boxes for each orbital in the partially filled subshell. For a subshell with n orbitals, put one electron in each box first (spin up), then add additional electrons as pairs. The number of boxes with a single electron is the number of unpaired electrons. For example, 3d6 has 5 orbitals; fill 5 single electrons, then the 6th pairs with one, leaving 4 unpaired. The calculator does this for you.
Can I use the periodic table to get the configuration?
Yes. The periodic table is organized by electron configuration. The row number gives the principal quantum number for the s and p blocks, but for d and f blocks, subtract 1 or 2 from the row number. For example, Fe is in period 4, group 8, so the valence configuration is 4s2 3d6. The noble-gas core is the element at the end of the previous period. This method is faster for large atoms.
Why do we write 4s before 3d in the full configuration?
We write the orbitals in the order they are filled, which is the Aufbau order. So 4s comes before 3d. However, when listing orbitals by principal quantum number (e.g., for ionization energies), you might write 3d before 4s. Both are correct depending on context; the filling order is the standard for ground-state configurations.