molecalculator

Moles & Molar Mass

Electron Configuration Rh: Rhodium’s Electron Shells

Calculator No. 01-10810 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This page explains the electron configuration of rhodium (Rh), element 45, and shows you how to write it in both long and shorthand forms. You enter nothing here; the configuration is a fixed property of the element. The answer is: Rh has the electron configuration [Kr] 4d8 5s1, which is an exception to the Aufbau principle because the 4d and 5s orbitals are very close in energy.

Formula

The electron configuration is built by filling orbitals in order of increasing energy, following the Aufbau principle, Hund’s rule, and the Pauli exclusion principle. The order of filling is:

1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.

Each orbital holds a maximum of 2 electrons. The number of electrons equals the atomic number (Z), which for rhodium is 45. The shorthand uses the previous noble gas (krypton, Z=36) as a core: [Kr] = 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6.

Worked Example

Using the default atomic number 45 (rhodium):

  1. Start with krypton core: [Kr] accounts for 36 electrons.
  2. Remaining electrons: 45 − 36 = 9 electrons.
  3. According to the Aufbau order, the next orbitals are 5s (capacity 2) and 4d (capacity 10).
  4. A naive filling would give 5s2 4d7. However, rhodium is an exception: one electron from 5s moves to 4d to achieve a half-filled (4d5) or fully filled (4d10) d subshell, which is more stable. For Rh, the actual ground state is 4d8 5s1.
  5. Thus the long configuration is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d8 5s1, and the shorthand is [Kr] 4d8 5s1.

Check: 36 (core) + 8 (4d) + 1 (5s) = 45 electrons. The number of unpaired electrons in the ground state is 2 (two unpaired in 4d orbitals).

Assumptions

  • The configuration is for the neutral, ground-state atom in the gas phase.
  • Orbital energies are based on the standard Aufbau order; exceptions like Rh are verified by spectroscopy.
  • The shorthand uses the nearest preceding noble gas, which is krypton (Z=36).

Why Rhodium Is an Exception

Most transition metals follow the Aufbau principle, but several elements in groups 6, 7, and 9–11 deviate because the 4d and 5s orbitals are extremely close in energy. In rhodium, the energy cost of moving one electron from 5s to 4d is more than compensated by the exchange energy gained from having more unpaired d electrons and a more symmetric d subshell. Similar exceptions occur in chromium ([Ar] 3d5 4s1), copper ([Ar] 3d10 4s1), and niobium ([Kr] 4d4 5s1).

How to Read the Configuration

The notation 4d8 5s1 tells you that rhodium’s outermost electrons are in the fourth and fifth principal shells. The 4d subshell has 8 electrons and the 5s has 1. The 4d electrons are the valence electrons that participate in bonding, which explains rhodium’s common oxidation states of +3 and +1. The single 5s electron is easily lost, so rhodium often forms Rh(I) compounds.

Common Mistakes and Misconceptions

  • Writing 5s2 4d7: Many textbooks list the Aufbau order and apply it blindly. Always check the periodic table or a reliable reference for exceptions.
  • Confusing the order of filling with the order of writing: In the long form, we write orbitals in order of increasing principal quantum number (1s, 2s, 2p, 3s…), not in the order they fill (which would put 3d before 4s).
  • Assuming the 4d subshell is filled before 5s: In rhodium, 4d is not full (8 of 10), and 5s has only 1 electron.
  • Using argon as the core: Argon (Z=18) is the core for elements in period 4, but rhodium is in period 5, so krypton (Z=36) is correct.

Why It Matters in Chemistry

The electron configuration determines rhodium’s chemical behavior. The 4d8 5s1 arrangement gives rhodium a high catalytic activity, especially in hydrogenation and hydroformylation reactions. It also explains why rhodium is a noble metal: the d orbitals are nearly filled, making the atom resistant to oxidation. In the periodic table, rhodium sits in group 9, period 5, between cobalt and iridium, and its configuration is typical of the second-row transition metals, which often prefer a d8 s1 or d5 s1 arrangement.

Frequently Asked Questions

What is the full electron configuration of rhodium?

The full configuration is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d8 5s1. This accounts for all 45 electrons.

Why is rhodium’s configuration [Kr] 4d8 5s1 instead of [Kr] 4d7 5s2?

The 4d and 5s orbitals are so close in energy that the repulsion between two 5s electrons outweighs the small energy gap. Moving one electron to 4d reduces electron-electron repulsion and increases exchange energy, making the d8 s1 arrangement more stable.

How many valence electrons does rhodium have?

Rhodium has 9 valence electrons: 8 in the 4d subshell and 1 in the 5s subshell. In transition metals, the d electrons count as valence electrons because they participate in bonding.

Is rhodium’s configuration an exception to the Aufbau principle?

Yes. The Aufbau principle predicts 4d7 5s2, but the actual ground state is 4d8 5s1. This is a well-known exception, similar to chromium and copper.

How does rhodium’s configuration affect its oxidation states?

The 4d8 5s1 configuration allows rhodium to lose the 5s electron and one or more d electrons. The most common oxidation states are +3 (losing three d electrons) and +1 (losing the 5s electron). The +3 state is especially stable because it achieves a d6 configuration, which is often low-spin and inert.

Does rhodium have any unpaired electrons?

Yes, rhodium has 2 unpaired electrons in its ground state. The 4d subshell has 8 electrons, which means there are two half-filled orbitals (each with one electron) and three fully filled orbitals (each with two electrons).

Practical Notes

When writing configurations for other transition metals, always check a reliable periodic table or a spectroscopy reference. The Aufbau principle is a useful guide but not a law. For rhodium, the correct configuration is [Kr] 4d8 5s1, and you can use the calculator above to verify configurations for any element from hydrogen to oganesson.

Related

Formula used
in z | Atomic number | - | 45 | 1 | 118
out config | Electron configuration (long) | - | "1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d8 5s1" | 0
out shorthand | Shorthand (noble gas core) | - | "[Kr] 4d8 5s1" | 0
out unpaired | Unpaired electrons (ground state) | - | 2 | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →