molecalculator

Moles & Molar Mass

Electron Configuration of Vanadium Explained

Calculator No. 01-11164 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The electron configuration of vanadium (V, atomic number 23) is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d³ 4s², often abbreviated as [Ar] 3d³ 4s². This arrangement places three electrons in the 3d subshell and two in the 4s subshell, following the Aufbau principle with the 4s filled before 3d. Below, we break down why this configuration occurs, how to write it, and what it means for vanadium’s chemistry.

Formula and Notation

The electron configuration is built by filling orbitals in order of increasing energy, following the Aufbau principle. The order is: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p. For vanadium (Z = 23), you count 23 electrons and place them in this order:

  • 1s² (2 electrons)
  • 2s² (2 electrons)
  • 2p⁶ (6 electrons)
  • 3s² (2 electrons)
  • 3p⁶ (6 electrons)
  • 4s² (2 electrons) – filled before 3d
  • 3d³ (3 electrons) – remaining 3 electrons

The shorthand uses the noble gas core: [Ar] represents the configuration of argon (1s² 2s² 2p⁶ 3s² 3p⁶), so vanadium becomes [Ar] 3d³ 4s². The superscripts indicate the number of electrons in each subshell.

Worked Example: Deriving Vanadium’s Configuration

Take the atomic number 23. Follow the Aufbau order:

  1. Fill 1s: 2 electrons (total 2)
  2. Fill 2s: 2 electrons (total 4)
  3. Fill 2p: 6 electrons (total 10)
  4. Fill 3s: 2 electrons (total 12)
  5. Fill 3p: 6 electrons (total 18)
  6. Fill 4s: 2 electrons (total 20)
  7. Fill 3d: 3 electrons (total 23)

So the full configuration is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d³ 4s². The shell occupancy (principal quantum number n) is: K shell (n=1) has 2, L shell (n=2) has 2+6=8, M shell (n=3) has 2+6+3=11, N shell (n=4) has 2. Thus 2, 8, 11, 2.

Assumptions and Rules

  • The Aufbau principle assumes orbitals are filled in order of increasing energy, which is accurate for neutral atoms in the ground state.
  • Hund’s rule: for the 3d subshell, the three electrons occupy separate orbitals with parallel spins before pairing, which is why we write 3d³ not 3d² 3d¹.
  • This configuration is for a neutral, ground-state vanadium atom. Ions have different configurations (e.g., V³⁺ loses 4s² first, then one 3d electron).
  • The 4s orbital is lower in energy than 3d for neutral atoms, but this reverses for cations.

Why 4s Fills Before 3d

Many students wonder why 4s is filled before 3d even though 3d has a lower principal quantum number. The reason is that the 4s orbital has a lower energy than 3d in neutral atoms due to electron shielding and penetration. The 4s electron penetrates closer to the nucleus than a 3d electron, experiencing a higher effective nuclear charge. This is a quantum mechanical result, not a simple rule. However, once electrons are removed to form cations, the 4s electrons are lost first because the 3d electrons become lower in energy. So V³⁺ has configuration [Ar] 3d², not [Ar] 4s² 3d¹.

Common Misconceptions

A frequent error is writing 3d⁵ 4s⁰ for vanadium, expecting a half-filled d subshell. That would require 24 electrons (chromium). Vanadium has only 23 electrons, so it cannot achieve a half-filled 3d. Another mistake is forgetting that 4s is filled before 3d, leading to 3d⁵ 4s⁰ or 3d⁴ 4s¹. Always count electrons carefully. Also, the abbreviated form [Ar] 3d³ 4s² is preferred because it is shorter and highlights the valence electrons (3d and 4s).

Vanadium’s Chemistry and Oxidation States

The electron configuration explains vanadium’s common oxidation states. Vanadium can lose all five valence electrons (3d³ 4s²) to form V⁵⁺, which has a noble gas configuration [Ar]. This is why vanadium(V) compounds are common and stable. Other oxidation states include +4 (loses 4s² and one 3d electron), +3, and +2. The +2 state corresponds to [Ar] 3d³, and +3 to [Ar] 3d². The variety of oxidation states gives vanadium colorful chemistry, with solutions displaying different colors depending on the oxidation state: V²⁺ (violet), V³⁺ (green), V⁴⁺ (blue), and V⁵⁺ (yellow).

How to Use the Calculator

Our calculator above lets you check configurations for any element from hydrogen (Z=1) to oganesson (Z=118). Enter the atomic number, and it returns the full configuration and shell occupancy. This is useful for homework, teaching, or quick reference. Note that the calculator assumes the ground-state neutral atom and uses the standard Aufbau order. For ions, you would need to adjust the electron count manually.

Frequently Asked Questions

What is the electron configuration of vanadium ion V³⁺?

For V³⁺, remove three electrons from the neutral atom. Electrons are removed first from the 4s orbital, then from 3d. So V³⁺ has configuration [Ar] 3d². The 4s electrons are lost first because in ions, the 3d orbitals are lower in energy.

Why is vanadium’s configuration not [Ar] 3d⁵?

That would require 24 electrons, which is chromium. Vanadium has only 23 electrons. The 3d subshell can hold up to 10 electrons, but vanadium only has three to place there after filling 4s. Chromium is an exception where one 4s electron is promoted to 3d to achieve a half-filled d subshell, but vanadium cannot do that with only three d electrons.

Does vanadium have unpaired electrons?

Yes. The 3d³ configuration has three unpaired electrons (one in each of three d orbitals), and the 4s² has a paired pair. So vanadium is paramagnetic, meaning it is attracted to magnetic fields. The magnetic moment is approximately √(n(n+2)) where n=3, giving about 3.87 Bohr magnetons.

How do I write the noble gas shorthand for vanadium?

Find the noble gas before vanadium, which is argon (Z=18). Write [Ar] to represent the first 18 electrons, then add the remaining electrons: 3d³ 4s². So the shorthand is [Ar] 3d³ 4s².

Why is 4s written before 3d in the configuration?

Because in the neutral atom, 4s has lower energy than 3d. This is due to the 4s electron’s greater penetration. The order of filling is 4s before 3d, but when writing the configuration, it is conventional to list subshells in order of increasing principal quantum number, so 3d³ 4s² is written rather than 4s² 3d³, even though 4s fills first.

What is the electron configuration of vanadium in its +5 oxidation state?

V⁵⁺ has lost all five valence electrons (3d³ 4s²), leaving the core configuration [Ar]. This is isoelectronic with argon and is very stable, which is why vanadium(V) compounds are common.

Related

Formula used
in z | Atomic number | - | 23 | 1 | 118
out ec | Electron configuration | - | "1s² 2s² 2p⁶ 3s² 3p⁶ 3d³ 4s²" | 0
out shell | Shell occupancy (K, L, M, N) | - | "2, 8, 11, 2" | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →