molecalculator

Moles & Molar Mass

Electronic Configuration of Vanadium (V)

Calculator No. 01-9633 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The electronic configuration of vanadium (V) is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d³ 4s², often abbreviated as [Ar] 3d³ 4s². This arrangement places three electrons in the 3d subshell and two in the 4s subshell, reflecting the order in which orbitals are filled according to the Aufbau principle.

Formula

The electronic configuration is written using the standard notation: each subshell is listed in order of increasing principal quantum number (n) and azimuthal quantum number (l), with a superscript indicating the number of electrons in that subshell. For vanadium (Z = 23), the filling order follows the Aufbau sequence: 1s, 2s, 2p, 3s, 3p, 4s, 3d. The total number of electrons equals the atomic number, so the sum of all superscripts must equal 23.

Variables: n = principal quantum number (shell), l = azimuthal quantum number (subshell: s=0, p=1, d=2, f=3), and the superscript = electron count in that subshell. The configuration is a shorthand description of the electron distribution, not a calculation result—there is no formula to compute it beyond counting electrons and applying the Aufbau order plus Hund’s rule.

Worked Example

Take vanadium with atomic number 23. Start filling orbitals in order:

  • 1s: 2 electrons (total 2)
  • 2s: 2 electrons (total 4)
  • 2p: 6 electrons (total 10)
  • 3s: 2 electrons (total 12)
  • 3p: 6 electrons (total 18)
  • 4s: 2 electrons (total 20)
  • 3d: remaining 3 electrons (total 23)

Thus the full configuration is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d³ 4s². The abbreviated form uses the noble gas core [Ar] (which accounts for 18 electrons) followed by 3d³ 4s². This matches the default values shown in the calculator block, though that block is for molarity, not electron configuration—the configuration is a fixed property of the element, not an input-dependent result.

Assumptions

  • The Aufbau principle holds: orbitals fill in order of increasing energy (1s, 2s, 2p, 3s, 3p, 4s, 3d).
  • Hund’s rule applies: electrons occupy degenerate orbitals singly before pairing.
  • The configuration is for a neutral, ground-state vanadium atom.
  • No relativistic effects or exceptions (as seen in chromium or copper) apply to vanadium.

Why 4s is Filled Before 3d

A common point of confusion is why the 4s subshell (n=4) fills before 3d (n=3). The reason is that the 4s orbital has a lower energy than 3d for neutral atoms, despite the higher principal quantum number. This is due to electron shielding and penetration: the 4s electron penetrates closer to the nucleus, lowering its energy. However, once the 3d orbitals start filling, the 4s electrons are actually higher in energy than 3d, which explains why transition metals often lose 4s electrons first when forming cations. For vanadium, the neutral atom has 4s² 3d³, but the V²⁺ ion has 3d³ (no 4s electrons), and V³⁺ has 3d².

How to Write the Configuration for Ions

When writing configurations for vanadium ions, remove electrons from the 4s orbital before the 3d. For V²⁺ (atomic number 23, so 21 electrons), remove the two 4s electrons: [Ar] 3d³. For V³⁺ (20 electrons), remove two 4s and one 3d: [Ar] 3d². For V⁵⁺ (18 electrons), remove all 3d and 4s electrons: [Ar]. This pattern is consistent across the first-row transition metals and is a key point in coordination chemistry, where vanadium commonly exhibits +2, +3, +4, and +5 oxidation states.

Common Mistakes and Misconceptions

  • Writing 3d before 4s in the notation: Although 3d has lower energy after filling, the standard notation lists subshells in order of increasing n, so 4s comes before 3d in the written configuration. Some textbooks write 3d³ 4s², which is also acceptable but less common.
  • Assuming the 4s is always lower in energy: For neutral atoms, 4s is lower, but for cations, 3d becomes lower. This leads to the correct ion configurations.
  • Forgetting Hund’s rule: The three 3d electrons occupy three separate d orbitals with parallel spins, not paired in one orbital. This affects magnetic properties—vanadium is paramagnetic.
  • Confusing vanadium with chromium: Chromium (Z=24) has an exception: [Ar] 3d⁵ 4s¹, not 3d⁴ 4s². Vanadium does not have this exception, but students often generalize incorrectly.

Applications of Vanadium’s Configuration

The electron configuration dictates vanadium’s chemistry. With three unpaired d electrons, vanadium forms colored compounds (e.g., VO²⁺ is blue, VO₂⁺ is yellow) and exhibits multiple oxidation states. This makes it useful in redox flow batteries, where vanadium ions in different oxidation states store and release energy. The configuration also explains its catalytic properties: vanadium pentoxide (V₂O₅) is used in the contact process for sulfuric acid production. In biology, vanadium is a trace element in some enzymes, such as vanadium nitrogenase, where its electron configuration allows it to bind nitrogen. Understanding the configuration helps predict bonding, magnetism, and reactivity.

Frequently Asked Questions

What is the shorthand electron configuration for vanadium?

The shorthand is [Ar] 3d³ 4s². The [Ar] core represents the 18 electrons that fill the 1s, 2s, 2p, 3s, and 3p orbitals, identical to the argon atom. The remaining five electrons are in the 3d and 4s subshells.

Why does vanadium not follow the expected 3d⁵ 4s⁰ configuration?

Vanadium has 23 electrons, so after filling [Ar] (18 electrons), five electrons remain. The 4s orbital is lower in energy than 3d for neutral atoms, so two electrons enter 4s first, leaving three for 3d. A 3d⁵ 4s⁰ configuration would require 23 electrons but would place all five in 3d, which is higher in energy than 4s for the neutral atom, so it is not the ground state.

How many unpaired electrons does vanadium have?

Vanadium has three unpaired electrons, all in the 3d subshell. The two 4s electrons are paired. This gives vanadium a magnetic moment and makes it paramagnetic. The number of unpaired electrons is crucial for predicting magnetic behavior and electron spin resonance spectra.

What is the electron configuration of V³⁺?

V³⁺ has 20 electrons (23 – 3). Remove two 4s electrons and one 3d electron, leaving [Ar] 3d². This ion has two unpaired electrons and is common in vanadium(III) compounds like VCl₃.

Is the electron configuration of vanadium an exception to the Aufbau principle?

No, vanadium follows the Aufbau principle exactly. Exceptions occur for chromium (Z=24) and copper (Z=29), where a half-filled or fully filled d subshell is favored. Vanadium does not have such a stabilization, so it follows the standard order.

Why is the 4s orbital written after 3d in some configurations?

Some chemists prefer to write the configuration in order of increasing energy after filling, which places 3d before 4s because 3d has lower energy than 4s for transition metal atoms. However, the IUPAC-recommended order is by principal quantum number, so 4s comes first. Both notations are correct; the important part is the electron count and the order of filling for ionization.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →