The enthalpy of melting ice—also called the enthalpy or latent heat of fusion—is about 333.55 joules per gram at 0 °C and standard atmospheric pressure. This calculator estimates the heat absorbed when a specified mass of ice melts at 0 °C, using the conventional value 333.55 J/g; enter the mass in grams to get heat in joules and kilojoules.
Formula
At the melting point, the heat required for melting is mass multiplied by the specific enthalpy of fusion:
q = m × ΔHfus
- q is heat absorbed, in joules (J).
- m is the mass of ice, in grams (g).
- ΔHfus is the specific enthalpy of fusion used here, 333.55 J/g.
The equivalent molar value is approximately 6.01 kJ/mol. To convert a specific value in J/g to J/kg, multiply by 1,000: 333.55 J/g = 333,550 J/kg. The calculator uses grams directly, so its first result is in joules; the second output divides by 1,000 to show kilojoules.
Worked Example
For the default mass of 100 g:
q = m × ΔHfus
q = 100 g × 333.55 J/g = 33,355 J
Convert joules to kilojoules: 33,355 J ÷ 1,000 = 33.355 kJ.
The calculator displays the first result to one decimal place, so the headline answer is 33,355.0 J; the kilojoule result is 33.3550 kJ.
Assumptions
- The substance is pure ice and melts at its equilibrium melting point, treated as 0 °C.
- The pressure is approximately standard atmospheric pressure, and 333.55 J/g is used as a conventional reference value.
- The ice begins at 0 °C; the calculation excludes energy needed to warm colder ice.
- The result covers melting only. It excludes warming the resulting liquid water, heat losses to surroundings, and the heat capacity of a container.
What Enthalpy of Fusion Means
Melting changes water from solid ice to liquid water. At the melting point, adding heat does not immediately raise the temperature of a pure ice–water mixture. Instead, energy goes into changing the arrangement of water molecules: the ordered solid structure breaks down enough for molecules to move as a liquid. That energy per unit mass is the specific enthalpy of fusion.
“Latent heat” is a traditional name for heat transferred during a phase change without a temperature change. Enthalpy is the more precise thermodynamic quantity commonly used for such changes at constant pressure. For everyday calculations, the terms latent heat of fusion and enthalpy of melting are often used for the same energy-per-mass idea.
Melting absorbs heat, so the process is endothermic. The reverse change, freezing, releases approximately the same amount of energy per gram under the same conditions. The sign depends on the process: the ice gains heat when it melts, while the surroundings lose that heat if they supply it.
How to Use the Calculator
Enter the mass of ice in grams. The result is the heat the ice must absorb to melt, provided it is already at 0 °C. For example, 250 g requires 83,387.5 J, or 83.3875 kJ, under the calculator’s stated assumptions.
- Convert a mass in kilograms to grams by multiplying by 1,000 before entering it. For example, 0.5 kg is 500 g.
- For a result in kilojoules, use the second output or divide joules by 1,000.
- For a number of ice cubes, first find their combined mass; the energy depends on total mass, not the number or shape of the pieces.
The calculator gives an ideal phase-change estimate, not a complete prediction of how much energy a real freezer, drink, or melting setup will exchange. The surroundings can add or remove heat, and the ice may not start at its melting point.
Melting Ice Versus Warming It
A frequent misconception is that all heat supplied to ice simply makes its temperature rise. Below the melting point, added heat warms the solid. At the melting point, heat is absorbed during melting while the temperature remains nearly constant for a pure substance at stable pressure. Once all ice has melted, additional heat warms the liquid water.
If ice starts below 0 °C, calculate warming and melting separately. For ice warmed from an initial temperature Ti to 0 °C, the approximate warming energy is:
qwarm = m × cice × (0 °C − Ti)
Here cice is the specific heat capacity of ice, about 2.1 J/(g·°C) as a useful approximate value. Then add the melting energy m × 333.55 J/g. If the resulting water is also warmed, add a further term using the liquid-water specific heat, approximately 4.18 J/(g·°C). These are separate temperature intervals, so the melting formula alone cannot give the total for a process that begins with subzero ice and ends with warm water.
Why the Value Is Approximate
The quoted value depends slightly on pressure and temperature conventions, and reference sources may round it differently. Around 334 J/g is an appropriate rounded value for many classroom estimates; this calculator uses 333.55 J/g to make its convention explicit. That precision should not be mistaken for universal accuracy in a real-world heat-transfer experiment.
Impurities and dissolved substances can change the melting behavior, while heat exchange with the container and air affects measured energy. In a practical measurement, the surroundings may supply heat without it all going into melting the sample. A value inferred from such a setup can therefore differ from the reference enthalpy of fusion.
Mass units are another common source of error. Multiplying grams by J/g gives joules; multiplying kilograms by J/g without converting units makes the answer 1,000 times too small. Check that the mass and the denominator in the specific enthalpy use matching units.
Frequently Asked Questions
How much energy does it take to melt 1 gram of ice?
About 333.55 J, provided the ice is at 0 °C and the reference conditions apply. A rounded estimate is 334 J.
How much heat does it take to melt 1 kg of ice?
About 333,550 J, or 333.55 kJ, at 0 °C. This is the melting energy only, not the energy to warm colder ice or the melted water.
Does ice get warmer while it melts?
For a pure ice–water mixture at stable pressure, its temperature stays close to the melting point while both phases are present. After the last ice melts, further heat warms the liquid.
Is enthalpy of fusion the same as latent heat of fusion?
They refer to the same practical energy-per-mass quantity in many introductory calculations. Enthalpy of fusion is the thermodynamic term for the enthalpy change during melting.
Does freezing release the same amount of heat?
Approximately yes: freezing releases the energy that melting absorbs for the same mass and conditions. The heat has the opposite direction, so the phase-change enthalpy has the opposite sign for freezing.
Related
Formula used
in m | Mass of ice | g | 100 | 0 out q | Heat absorbed to melt ice at 0 °C | J | m * 333.55 | 1 out kj | Heat absorbed | kJ | q / 1000 | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Isotope Percent Abundance Calculator and How to Use It75.91 %
- Percentage Abundance Calculator and How to Find It
- Isotope Fractional Abundance Calculator and Formula0.2409 fraction
- Percent Abundance Formula: Calculate Isotope Percentages25.00 %
- Isotope Percent Abundance Calculator and How to Use It50.00 %
- Isotope Percent Abundance Calculator and How-To Guide75.91 %