molecalculator

Moles & Molar Mass

Nuclear Decay Equation: Calculate Remaining Atoms

Calculator No. 01-5025 · Updated · Formula and assumptions shown below

Nuclei remaining 367,879 nuclei
Fraction decayed
0.632121
Result, rounded to 6 decimal places
Initial radioactive nuclei
1000000 nuclei
Set in the form below
Decay constant
0.000001 s^-1
Set in the form below
You enter
Initial radioactive nuclei (nuclei), Decay constant (s^-1), Elapsed time (s)
You get
Nuclei remaining (nuclei), Fraction decayed
Rounding
0 dp · 6 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The nuclear decay equation is N(t) = N₀e−λt: it calculates how many radioactive nuclei remain after time t. Enter an initial number of nuclei, a decay constant, and elapsed time to calculate the remaining number and the fraction that has decayed.

Formula

The radioactive-decay law is N(t) = N₀e−λt. Here, N(t) is the expected number of radioactive nuclei remaining at elapsed time t, in nuclei; N₀ is the initial number, in nuclei; λ (lambda) is the decay constant, in s−1 for this calculator; t is elapsed time in seconds; and e is the base of natural logarithms. The exponent must be dimensionless, so the time unit used with λ must match. If λ is in s−1, convert years or days to seconds before entering time.

The first output is the expected number remaining. The second is the dimensionless fraction decayed, calculated as 1 − e−λt. Multiply that fraction by 100 for a percentage. These formulas describe a single radioactive population with a constant decay probability per unit time; they do not include production of new nuclei or changing environmental conditions that alter the nuclear process.

Worked Example

Using the calculator’s defaults, N₀ = 1,000,000 nuclei, λ = 0.000001 s−1, and t = 1,000,000 s:

  1. Calculate the dimensionless exponent: −λt = −(0.000001 s−1)(1,000,000 s) = −1.
  2. Calculate the remaining number: N(t) = 1,000,000 × e−1 = 367,879.441… nuclei, or 367,879 nuclei rounded to the displayed whole-number precision.
  3. Calculate the decayed fraction: 1 − e−1 = 0.632121. That is 63.2121% decayed.

Assumptions

  • The population follows a single, constant decay constant over the stated time.
  • The result is an expected value. Actual counts in a small sample can differ because individual decays are random.
  • The calculator expects the decay constant in s−1 and time in seconds; it does not convert units automatically.
  • The fraction-decayed output is a fraction, not a percentage.

How the Decay Law Works

Radioactive decay is probabilistic: no equation predicts the precise moment a particular nucleus will decay. Instead, λ describes the probability of decay per unit time for each nucleus in a large population. Over a short interval, the expected number of decays is proportional to the number still present and to the interval’s duration. This leads to the differential equation dN/dt = −λN. Solving it gives the exponential law in the calculator.

The minus sign means the number of undecayed nuclei decreases with time. The curve is exponential rather than linear: the amount lost during a particular interval becomes smaller as fewer radioactive nuclei remain. For an ideal population, the fraction remaining after a fixed duration is the same regardless of the starting quantity.

Half-Life and Activity

Half-life, written t1/2, is the time for half the original radioactive nuclei to decay. It and the decay constant are related by t1/2 = ln(2)/λ, or equivalently λ = ln(2)/t1/2. For example, if a half-life is supplied in days, first convert it to seconds: multiply the number of days by 86,400 s/day, then calculate λ in s−1. The half-life is characteristic of a particular radionuclide; it is not the time for every nucleus in a sample to decay.

Activity is the rate of nuclear decays, not the number of nuclei remaining. For a single radionuclide, its expected activity is A = λN, with λ in s−1 and A in decays per second. One decay per second is one becquerel (Bq). Activity decreases over time along with N, provided there is no continuing production of the radionuclide. The calculator reports N and the fraction decayed, not activity.

Using the Equation and Its Limits

Use the equation when you know or can determine the initial population, decay constant, and elapsed time, and want an ideal estimate of the remaining radioactive nuclei. If the problem gives a half-life instead of λ, convert it using the relation above. Keep all time units consistent, and check that λt is dimensionless. A common mistake is entering a time in years while leaving λ in s−1; the resulting exponent would be wrong by a large factor.

The law applies to radioactive nuclei, not automatically to the total mass of a mixed sample. If stable material or multiple radionuclides are present, identify which isotope’s nuclei are being counted. For a mixture of radionuclides with different decay constants, calculate each population separately and add the relevant quantities; a single λ generally cannot represent the mixture. Radioactive parent nuclei may also produce radioactive daughter nuclei, so the daughter population requires its own production-and-decay equation.

For a finite sample, the number of decays is an integer, whereas the equation can return a non-integer expected value. Rounding is appropriate for a simple display, but it does not make the prediction exact. Statistical variation is especially noticeable when only a small number of nuclei remain. Also, do not confuse “half the initial atoms have decayed” with “half the sample’s total mass has disappeared”: decay products remain as matter, although they may be different nuclides and may emit radiation or particles.

Frequently Asked Questions

What is the equation for nuclear decay?
The standard equation is N(t) = N₀e−λt. It gives the expected number of radioactive nuclei remaining after time t, given the initial number N₀ and decay constant λ.

How do I calculate the number of atoms left after one half-life?
Half the initial radioactive nuclei remain: N = N₀/2. After two half-lives, one quarter remain; after three, one eighth. This pattern follows the exponential decay law.

How do you find the decay constant from half-life?
Use λ = ln(2)/t1/2. The half-life and λ must use reciprocal, matching time units—for example, seconds and s−1.

Is nuclear decay linear or exponential?
For a radionuclide with a constant decay probability, the number remaining follows an exponential decrease. It does not lose the same number of nuclei in every equal time interval; it loses the same fraction in each half-life.

Does the equation predict exactly when an atom decays?
No. Decay of an individual nucleus is random. The equation predicts the average behavior of a population, with greater relative statistical fluctuation when the number of nuclei is small.

Related Equations

Three useful forms summarize the same decay model: N(t) = N₀e−λt for the remaining population; t1/2 = ln(2)/λ for half-life; and A = λN for activity. Choose the form that matches the information you have and the quantity you need. These relations are a starting point for decay calculations, not a substitute for accounting for daughter products, isotope mixtures, or measurement uncertainty when those matter.

Related

Formula used
in n0 | Initial radioactive nuclei | nuclei | 1000000 | 0
in lam | Decay constant | s^-1 | 0.000001 | 0
in t | Elapsed time | s | 1000000 | 0
out n | Nuclei remaining | nuclei | n0 * exp(-lam * t) | 0
out f | Fraction decayed | - | 1 - exp(-lam * t) | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →