molecalculator

Moles & Molar Mass

Ethanol Formula and Molar Mass

Calculator No. 01-8949 · Updated · Formula and assumptions shown below

Molarity 1.0000 mol/L
Concentration in millimolar
1,000.00 mM
= Molarity × 1000
Mass of ethanol
46.07 g
Set in the form below
Molar mass
46.07 g/mol
Set in the form below
You enter
Mass of ethanol (g), Molar mass (g/mol), Volume of solution (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Ethanol’s molecular formula is C2H6O (often written C2H5OH to show its hydroxyl group), and its molar mass is 46.07 g/mol. This means one mole of ethanol—about 6.022 × 1023 molecules—weighs 46.07 grams.

Formula

The molecular formula C2H6O tells you that each ethanol molecule contains 2 carbon atoms, 6 hydrogen atoms, and 1 oxygen atom. The condensed structural formula, C2H5OH, emphasizes the alcohol functional group (–OH) attached to a two-carbon chain. The molar mass is the sum of the atomic masses of all atoms in the formula:

Molar mass = (2 × atomic mass of C) + (6 × atomic mass of H) + (1 × atomic mass of O)

Using IUPAC standard atomic weights:

  • Carbon (C): 12.011 g/mol
  • Hydrogen (H): 1.008 g/mol
  • Oxygen (O): 15.999 g/mol

So, M = (2 × 12.011) + (6 × 1.008) + (1 × 15.999) = 24.022 + 6.048 + 15.999 = 46.069 g/mol, which rounds to 46.07 g/mol.

Worked Example

Using the calculator defaults: you have 46.07 g of ethanol (exactly one mole) and you dissolve it in enough water to make 1000 mL (1 L) of solution. What is the molarity?

  1. Convert volume to liters: 1000 mL ÷ 1000 = 1 L
  2. Calculate moles of ethanol: 46.07 g ÷ 46.07 g/mol = 1.000 mol
  3. Molarity = moles ÷ volume = 1.000 mol ÷ 1 L = 1.000 mol/L

The calculator shows 1.0000 mol/L, confirming that one mole of ethanol in one liter gives a 1 M solution.

Assumptions

  • The molar mass uses IUPAC abridged atomic weights; actual isotopic composition may cause tiny variations.
  • The solution is assumed to be ideal and at a temperature where volume is measured (usually 20–25 °C).
  • The final volume is used, not the volume of solvent added; this matters because mixing ethanol with water causes volume contraction.

Background: What Is Ethanol?

Ethanol (also called ethyl alcohol, grain alcohol, or simply alcohol) is a volatile, flammable, colorless liquid. It is the intoxicating component of alcoholic beverages and is also used as a solvent, fuel additive, and antiseptic. Its chemical structure is a two-carbon chain with a hydroxyl group, making it the simplest alcohol after methanol. Ethanol is produced by fermentation of sugars by yeast and by hydration of ethylene.

How to Calculate Molar Mass of Ethanol

To find the molar mass of any compound, follow these steps:

  • Write the molecular formula.
  • Look up the atomic mass of each element (use the periodic table).
  • Multiply each atomic mass by the number of atoms of that element in the formula.
  • Sum all the contributions.

For ethanol, the calculation is straightforward because the formula is small. This method also works for more complex molecules like glucose (C6H12O6, molar mass 180.16 g/mol) or acetic acid (C2H4O2, 60.05 g/mol).

Common Mistakes and Misconceptions

  • Confusing formula units: C2H6O and C2H5OH are the same molecule; the latter just shows the hydroxyl group.
  • Using the wrong atomic mass: Some sources use 12.01 for carbon and 1.01 for hydrogen, giving 46.07 g/mol anyway. But using 12.0 and 1.0 would give 46.0 g/mol—slightly off.
  • Forgetting the oxygen: A common error is to calculate only C and H, giving 30 g/mol, which is wrong.
  • Mixing up molar mass and density: Molar mass is mass per mole (g/mol), not mass per volume (g/mL). Ethanol’s density is 0.789 g/mL at 20 °C.

Why Molar Mass Matters

Molar mass is the bridge between the microscopic world (molecules) and the macroscopic world (grams). In the lab, you use it to convert between mass and moles, which is essential for preparing solutions, calculating reaction yields, and performing stoichiometry. For example, if you need 0.5 moles of ethanol for a reaction, you weigh out 0.5 × 46.07 = 23.035 g. In industry, molar mass is used to calculate concentrations in fermentation broths and to design distillation processes.

Ethanol vs. Other Alcohols

Ethanol is often compared to methanol (CH3OH, molar mass 32.04 g/mol) and isopropanol (C3H8O, molar mass 60.10 g/mol). Methanol is highly toxic and can cause blindness; ethanol is the only alcohol safe for consumption in moderation. Isopropanol is commonly used as a disinfectant. The molar mass difference affects boiling points: methanol boils at 64.7 °C, ethanol at 78.4 °C, and isopropanol at 82.6 °C. This is why fractional distillation can separate them.

Safety and Practical Use

Ethanol is flammable and should be kept away from open flames. It is also hygroscopic, meaning it absorbs water from the air, which can affect concentration measurements. When handling ethanol, follow your lab method, the safety data sheet (SDS) and your supervisor. For disinfection, a 70% (by volume) ethanol solution is more effective than 100% because the water helps denature proteins. In beverages, ethanol is a central nervous system depressant; consumption impairs judgment and coordination.

Frequently Asked Questions

What is the difference between ethanol and ethyl alcohol?

None—they are the same compound. “Ethyl alcohol” is the common name, while “ethanol” is the IUPAC name. The formula is the same: C2H5OH.

Why is ethanol’s molar mass not a whole number?

Because atomic masses are weighted averages of naturally occurring isotopes. Carbon is mostly C-12, but a small amount of C-13 and C-14 raises the average to 12.011. Similarly, hydrogen includes deuterium and tritium, giving 1.008.

How many grams are in one mole of ethanol?

Exactly 46.07 grams. If you have a sample that weighs 46.07 g, you have 6.022 × 1023 ethanol molecules.

Does ethanol have the same molar mass as dimethyl ether?

Yes. Dimethyl ether (CH3OCH3) also has the formula C2H6O, so its molar mass is also 46.07 g/mol. These are called isomers—same formula, different structure.

How do I make a 1 M ethanol solution?

Weigh 46.07 g of pure ethanol, transfer it to a 1 L volumetric flask, add distilled water to the mark, and mix. Remember to add the ethanol to the flask first, then water, because the total volume changes upon mixing.

What is the molar mass of ethanol in kg/mol?

Just divide by 1000: 0.04607 kg/mol. This is sometimes used in engineering calculations.

Related

Formula used
in m | Mass of ethanol | g | 46.07 | 0
in mm | Molar mass | g/mol | 46.07 | 0.001
in v | Volume of solution | mL | 1000 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →